Yinxiaoqian Technology D100 Thermal Printer User Manual

Yinxiaoqian Technology D100 Thermal Printer

Product Specifications

• Compliance: Part 15 of FCC Rules
• Condition 1: The device must not cause harmful interference
• Condition 2: The device must accept any received interference

Product Usage Instructions

To ensure proper operation and compliance with FCC Rules, follow these guidelines:

1. Do not modify the device in any way not approved by the responsible party.
2. Avoid using the device in a manner that may cause harmful interference.
3. Keep the device away from sources of interference to prevent undesired operation.
4. Follow all user manual instructions for safe and effective use.

If your printer is compatible with bluetooth and a computer. The APP Download & Bluetooth Connection as below:

1. Scan the QR Code to download the APP.
2. Find “Markfife” on Google Play Or App Store.

Bluetooth Connection Steps:
Make sure Bluetooth is enabled–Open the APP and click “UNLINK” in the upper left corner–. Find the printer model and use the printer according to the instruction

Caution: Do not search for the printer to be connected in the Bluetooth settings of your mobile phone.

Packing list

Basic parameters

• Model: D100
• Printing method: thermal
• Resolution: 203dpi Speed: 1 S0mm/s
• Width: 38-110mm Interface: USB/Blue-tooth
• Size: 1189886 mm Product net
• weight: ~840g

APP connection

Do Not Pair Bluetooth From the Setting!

Note:

1. Turn on the phone Bluetooth·
2. 0pen APP clisk”UNLINK”lind printer.

Great label

1. If the size you want is not available in the APP, you can set it yourself. NOTE: Please set the correct width and height, otherwise it will not print correctly)
2. The label machine is installed with a gap sticker—–100mm150mm, select the gap label.
3. The default size is shown here: 100mm 150mm,if you use other sizes of stickers, please select the correct size.

Windows – Printer driver installation

Note: Before installing the driver, turn off your computer’s antivirus software. the printer needs to be connected to the power supply and computer, and the power on state.

1. USB inserted into the computer, will automatically pop up the folder, double-click the compressed package to download.
   (NOTE: Before selecting USB, please make sure that the power supply of the machine is connected and the machine is turned on)

2. Choose USB Port

3. Click on the installation, display the “Installation Successful’ can be.

NOTE:

1. lf you use PDF to print directly, you need to select the correspond­ing printer driver 1 OS Label Printer,
2. the paper size is selected according to the actual paper size used, set the number of copies,
3. click print.
   • If the paper is inaccurate, press hold the machine button and hear “di” and “didi”
   • The machine automatically learns the paper type.

Mac – Printer driver installation
Note: Before installing the driver, turn off your computer’s antivirus software. the printer needs to be connected to the power supply and computer, and the power on state.

• USB inserted into the computer, will automatically pop up the folder, double-click the compressed package to download. Click Continue
• The driver installation is complete select the correct size and printer when printing.
• Select the file or picture you need to print choose the correct size & correct printer name when printing.

LED Status

Maintenance

1. Turn the printer off, remove the power cord, and open the cover.

2. Wait until the printer head cools down.
   The printer head may be very hot after printing.

3. Completely clean the printer head using an alcohol swap (not water).

4. Wait until the alcohol has completely vaporized, then close the cover.

5. Connect the power cord and print a test page to check if it is clean.

NOTICE

• Ensure power is off when performing maintenance.
• Do not touch or scratch the printer head surface, roller, or sensors.
• Avoid using gas, acetone, or other organic solvents.

PRO TIPS

• Anytime you change your label, run the automatic label identification.
• Press the button on the printer to get the check page on the printer to skip a blank label.
• To run a self-test, press and hold the feeder button until you hear two short beeps.
• Avoid using poor-quality labels as they can damage the printer.
• Regularly clean the printer head.
• If paper is jammed, turn off the printer, and allow the printer head to cool down. Open the cover and ensure that the rubber is clean. If dirty, use alcohol to clean. Allow the area to dry off before turning the printer on.
• Insert this printer into the same USB port on your computer every time.
• This will avoid creating duplicate copies of the printer in your operating system.

Safety notices

• The printer head can become very hot after printing labels. Do not touch the printer head.
• Do not bend the power cord excessively or place objects on the cord.
• Do not use the printer if you find any irregularities as these could result in fire or electrocution.
• Keep the printer out of reach of children.
• Use only approved accessories and do not try to disassemble or repair the unit by yourself.
• Keep the printer away from water and other objects that could penetrate the components.
• Please unplug the printer when it is not in use for long periods.

After-sales Service Email: marklifeservice@gmail.com

FCC STATEMENTS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

Q: What should I do if the device is causing interference?

A: If you experience interference issues, try moving the deviceto a different location away from potential sources of interference.

Q: Can I modify the device for better performance?

A: No, any changes or modifications not approved could void your authority to operate the equipment.

Q: How can I ensure compliance with FCC Rules?

A: Follow the provided guidelines and user manual instructions carefully to maintain compliance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>