Maxax T01 Sacramento 17.5-Inch White Table Lamp Set Instruction Manual
- June 4, 2024
- Maxax
Table of Contents
Maxax T01 Sacramento 17.5-Inch White Table Lamp Set
STEPS TO ASSEMBLE THE LAMPSHADE
- Take out the lampshade and 2 wrought iron frames
- Unfold the fabric lampshade
- Fix the two frames with velcro along the edge of the lampshade
- Mount the harp and install the bulb (Not included)
- Tighten the finial to secure the lampshade
Assembly & Installation Instructions
Dear Customer
Thank you for your business If you have any questions or problems, please send
us an email at support@4modernhome.com or call us
at 870-949-8466. We will do everything
possible to make you completely satisfied with your purchase. Product reviews
help future customers to make their purchase decision. You are encouraged to
share your experience by leaving a short product review on the platform where
you bought this product. Thank you! Gear Team
Warning: If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements. If there are any questions, contact a qualified electric
contractor.
Warning: California Residents Proposition 65 This product contains lead,
a chemical known to the state of California to cause cancer and birth defects
or other reproductive harm. Do not place the product in your mouth. Wash your
hands after handling this product.
Caution: It is highly recommended to get an electrician to install this
light. Please make sure to turn the electricity off at the main circuit
breaker before beginning installation. All glass is fragile. Use care when
handling glass component(s) and/or lamp(s)
- Unpack all parts from the carton carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Place the shade(C)onto the lamp socket(B).
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electrical circuit
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is Completed
PARTS INCLUDED
- Code/Part description/QTY
- A/Body/1
- B/Lamp socket/1
- C/Shade/1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>