franklin ben B14427 BECKETT CHIFFOROBE Instruction Manual
- June 4, 2024
- franklin ben
Table of Contents
- franklin ben B14427 BECKETT CHIFFOROBE Instruction Manual
- GETTING S TA RT ED
- PARTS
- HARDWARE
- OPTIONAL
- A N T I – T I P K I T I N S TA LL AT I O N
- Find your wall material and follow steps to attach the anti-tip kit to
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
franklin ben B14427 BECKETT CHIFFOROBE Instruction Manual
Welcome Home. We have carefully designed and crafted each piece of furniture
to be with your family for years to come.
We hope you cherish the memories of bedtime stories, goodnight kisses, holiday
mornings and baby’s first steps. Share your memories with us on Instagram
@franklinandben for a chance to
be featured. ank you for shopping local, Franklin & Ben
GETTING S TA RT ED
As always, for additional questions, please contact us and we’ll be more than willing to help!
PARTS
NOT TO SCALE
HARDWARE
ACTUAL SIZE
OPTIONAL
!b
A N T I – T I P K I T I N S TA LL AT I O N
Find your wall material and follow steps to attach the anti-tip kit to
your wall.
Drywall or plaster with available wood stud:
– Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the
attachment holes with a pencil.
– Drill 1/8-inch (3 mm) diameter pilot holes into the wood stud, on the pencil
marks.
– Following the appropriate pictogram instructions on the following pages,
drive two screws through the bracket and tighten screws firmly into the wood.
Drywall without available wood stud:
– Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the
attachment holes with a pencil.
– Drill 3/8-inch (9 mm) diameter holes through the wall, on the pencil marks.
– Drive the plastic anchors into the holes, using a hammer if needed.
– Following the appropriate pictogram instructions on the following pages,
drive two screws through the bracket and tighten screws firmly into the
plastic anchors in the wall. Do not over-tighten.
3a Fasten bracket to back of dresser. Fije el soporte en la parte posterior de
la cómoda
Fixez le support à l’arrière de la commode.
3a Place second bracket on the wall 1-2” (25-50mm) below the top of the dresser and mark holes.
3c Follow the “Find Your Wall Material” instructions on the previous page.
Drill a 3/8″ (9 mm) hole and insert plastic anchor into hole (If needed).
3d Fasten second bracket by screwing into plastic anchors or wood stud.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>