franklin ben 14516 Emory Farmhouse 6 Drawer Dresser Instructions

June 17, 2024
franklin ben

Franklin Ben 14516 Emory Farmhouse 6 Drawer Dresser

franklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-
product

Product Information

Specifications:

  • Brand: Franklin and Ben
  • Item Number: 14516
  • Material: Natural wood
  • Includes: Dresser Body, Middle support, Optional middle leg, Anti-Tip Kit

Product Usage Instructions

Assembly Instructions:

Thank you for purchasing a Franklin and Ben nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.franklinandben.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers.

Our pieces are made from natural woods. Due to the nature of wood, some variation in color, grain, or texture is to be expected.

Optional Middle Leg Installation:

  • Use the optional middle leg for added stability.

Anti-Tip Kit Installation:

Children have died from furniture tipover. To reduce the risk of furniture tipover, ALWAYS install the provided tip over restraint.

Important Safety Instructions:

  • Read all instructions before using the product.
  • Keep the instructions for future use.
  • Recheck all screws and bolts to be sure they are fastened securely.
  • Do not overtighten.

Frequently Asked Questions

Q: Can I use a power screwdriver for assembly?

A: We recommend using a Phillips head screwdriver and not using power screwdrivers for assembly to ensure proper installation.

Q: Is the middle leg necessary for stability?

A: The middle leg is optional but recommended for added stability.

Thank you for purchasing a Franklin and Ben nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.franklinandben.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers. Our pieces are made from natural woods. Due to the nature of wood, some variation in color, grain, or texture is to be expected.
We hope you and your growing family enjoy our product.

With thanks,
Franklin and Ben

  • You will need two people to assemble this 6-drawer dresser.
  • Tools Needed (not included)
  • Outils requis (non inclus)

PARTS

franklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-fig
\(3\)

ASSEMBLY INSTRUCTIONS

OPTIONAL

  • Use the optional middle leg for added stability.
  • Adjustable screw to help provide stabilityfranklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-fig \(4\)

ANTI-TIP KIT INSTALLATION

franklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-fig
\(5\)

Children have died from furniture tipovers. To reduce the risk of furniture tip-over, ALWAYS install tip-over restraint provided

HARDWARE

actual sizefranklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-fig
\(7\)

Find your wall material and follow steps to attach the anti-tip kit to your wall.

Drywall or plaster with available wood stud:

  • Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the attachment holes with a pencil.
  • Drill 1/8-inch (3 mm) diameter pilot holes into the wood stud, on the pencil marks.
  • Following the appropriate pictogram instructions on the following pages, drive two screws through the bracket and tighten screws firmly into the wood.

Drywall without available wood stud:

  • Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the attachment holes with a pencil.
  • Drill 3/8-inch (9 mm) diameter holes through the wall, on the pencil marks.
  • Drive the plastic anchors into the holes, using a hammer if needed.- Following the appropriate pictogram instructions on the following pages, drive two screws through the bracket and tighten screws firmly into the plastic anchors in the wall. Do not over-tighten. If your wall material is not listed here, or if you have any questions, consult your local hardware store.

2a

  • Fasten bracket to back of dresser

2b

  • Place second bracket on the wall 1-2” (25-50mm) below the top of the dresser and mark holesfranklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-fig \(8\)

2c

  • Follow the “Find Your Wall Material” instructions on the previous page. Drill a 3/8″ (9 mm) hole and insert plastic anchor into hole (If needed).

2d

  • Fasten second bracket by screwing into plastic anchors or wood stud.franklin-ben-14516-Emory-Farmhouse-6-Drawer-Dresser-fig \(10\)
  • Loop provided 2 ties through both brackets and secure tightly.

2e

  • Drywall without available wood studs.
  • Drywall or plaster with available wood stud.

READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten

IMPORTANT:

As with all infant and baby furniture, it is important to check fasteners, screws, and bolts periodically for tightness. Parents should ensure a safe environment for their children by checking the furniture regularly before placing a child in the product.

ONE-YEAR LIMITED WARRANTY

We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models. This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the finish, design, and hardware. The specific legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some states do not allow limitation on how long an implied warranty lasts.

Storage:

  • Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents.
  • Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot-up spills immediately.

Registering your product is even easier than before. You can register your product on our website at :

IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS

PLEASE VISIT US AT:

OR YOU CAN CONTACT US BY MAIL:
FRANKLIN AND BEN 8700 REX RD., PICO RIVERA, CA 90660

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals