VANPORE H20CF01 Electric Leaf Blower Cordless Instruction Manual

**VANPORE H20CF01 Electric Leaf Blower Cordless Instruction Manual

**

PRODUCT SAFETY

WARNING: some dust created by power sanding, sawing, grinding and drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

WARNING : this product can expose you to chemicals including lead. Phthalate or bisphenol which are known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after Use it.

CAUTION

• Do not blow hard objects such as nails, bolts, or rocks.
• Do not operate the blower near bystanders or pets.
• Use extra care when cleaning debris from stairs or other tight areas.
• Wear safety goggles or other suitable eye protection, long pants, and shoes.

FOR BATTERY TOOLS

The ambient temperature range for the use and storage of tools and batteries is 0°C-45°C.

The recommended ambient temperature range for the charging system during charging is  C-40 C.

CLEANING THE TOOL Clean the tool regularly.

WARNING: Keep your product dry. Do not spray with water under any circumstances

• To clean the tool, use only mild soap and a damp cloth.
• Do not use any type of detergent ,cleaner or solvent.
• Self lubricating bearings are used in your product, therefore lubrication is not required.

IMPORTANT SAFETY INSTRUCTIONS

WARNING : read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Failure to follow these instructions could result in damage to equipment or other property.

FOR ALL APPLIANCES

1. Avoid dangerous environment-Don’t use appliances in damp or wet locations. Don’t Use In Rain.
2. Keep Children Away – Al visitors should be kept at a distance from work area.
3. Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended
4. when working outdoors.Wear protective hair covering to contain long hair.
5. Use Safety Glasses – Always use face or dust mask if operation is dusty.
6. Use Right Appliance – Do not use appliance for any job except that for which itis intended.
7. Don’t Force Appliance- At the speed it was designed to do it will do better with less potential for injury risk.
8. Don’t overuse – Keep proper footing and balance at all times.
9. Stay Alert – Watch what you are doing. Use common sense. Do not operate appliance when you are tired.
10. Store Idle Appliances Indoors – When not in use, the appliances should be stored indoors in dry, high or in a locked place – out of the reach of children.
11. Maintain Appliance With Care – Keep cutting edge sharp and clean for best optimum performance and to reduced the risk of injury. Follow instructions for lubricating and changing accessories. Keep handles dry,clean,and free from oil and grease.
12. Check Damaged Parts – Before further use of the appliance, a protecting mask or other part that is damaged should be carefully checked to determine whether it will operate properly and perform its intended function. Check the alignment and combination of moving parts, breakage of parts, installation, and any other condition that may affect its operation. A protecting mask or other part that is damaged should be properly repaired or replaced by authorized service center unless stated otherwise in this manual.

FOR ALL BATTERY-OPERATED GARDENING APPLIANCES

1. Prevent accidental activation. Before connecting the battery pack, picking up or carrying the device, make sure the switch is in the off position. Carrying a device with your finger on a switch or energizing a device with a switch turned on can cause an accident.
2. Disconnect the battery pack from the appliance before making any operations Like adjustments,changing accessories or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
3. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
4. Use appliances only with specially designated battery packs. Use of any other battery packs may create a risk of injury and fire.
5. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects,which can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire.
6. Under abusive conditions, liquid may be ejected from the battery: avoid contact. In case of accidental contact, rinse with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
7. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
8. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
9. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range ma y damage the battery and increase the risk of fire.
10. Repaired by qualified service personnel using identical replacement parts. This will ensure that the safety of the product .
11. Do not modify or attempt to repair the appliance or the battery pack (as applicable) unless otherwise stated in the use and care instructions

ADDITIONAL SAFETY WARNINGS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING- To reduce the risk of fire, electric shock or injury:

1. To reduce the risk of electric shock — Do not use on wet surfaces. Do not expose to rain. Store indoors.
2. Not allowed to be used as a toy. Close attention is necessary when used by or near children.
3. Use only in accordance with the instructions in this manual. Use only accessories recommended by the manufacturer.
4. If the device does not work properly because it was dropped, damaged, left outdoors, or dropped into water, return it to the service center.
5. Keep hair, loose clothing, fingers, and all parts of body away form the openings and moving parts.
6. Do not charge outdoors.
7. Only charge with the charger provided by the manufacturer.
8. Do not incinerate the appliance even if it is severely damaged.The batteries may explode in fire.
9. Do not put any objects into openings. Do not use if opening is blocked; keep away of dust, lint, hair, and anything that may reduce air flow.
10. Do not handle plug or appliance with wet hands.
11. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
12. Turn off all controls before unplugging.
13. Use extra care when cleaning on stairs.

SAFETY WARNINGS FOR BATTERY PACK

• Do not dismantle,open or shred battery pack.
• Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.
• Do not short-circuit a battery pack. Do not store battery packs randomly in boxes or drawers where they may short out to each other or by other metal objects.When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects which can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire.
• Do not remove battery pack from its original packaging until required for use.
• Do not subject battery pack to mechanical shock.
• If the battery leaks, do not allow the liquid to come in contact with our skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Observe the plus (+) and minus(—) marks on the battery back and equipment to ensure correct use.
• Do not use any battery pack which is not designed for the equipment.
• Keep battery pack out of the reach of children.
• Seek medical advice immediately if a cell or battery has been swallowed.
• Always purchase the battery pack recommended by the device manufacturer for the equipment.
• Keep battery pack clean and dry.
• Wipe the battery pack terminals with a clean dry cloth if they become dirty.
• Battery pack need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
• Do not leave the battery pack charged for prolonged periods of time when not in use.
• After prolonged storage,it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
• Battery pack gives its best performance when it is operated at normal room temperature (20 °C £ 5 °C).
• When handling the battery pack, keep battery packs of different electrochemical systems separate from each other.
• Recharge only with the charger provided by VANPORE. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Retain the original product literature for future reference.
• Use the battery pack for its intended purpose only
• Remove the battery pack from the equipment when not in use.
• Dispose of properly.

SAVE THESE INSTRUCTIONS

• To reduce the risk of injury,user must read instruction manual.
• Safety Alert
• Wear ear protection
• Keep bystanders away
• Warning of hazard
• Eye Protection
• Long Hair
• Loose Clothing
• Do not use in the rain or leave outdoors while it is raining.
• Remove battery from ,the socket before carrying out any adjustment, servicing maintenance.
• Batteries may enter water cycle if disposed improperly ,which can be hazardous for % ecosystem .Do not dispose of waste batteries as unsorted municipal waste.
• Do not burn
• iolo battery, battery must be recycled.

Product Parts

COMPONENT LIST

1. Handle
2. On/Off Switch
3. 6-speed switch
4. Motor housing
5. Blower tube 1
6. Blower tube 2
7. Battery pack
8. Battery pack release button

• Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL DATA

MODEL: H20CFO01
VOLTAGE: 20V Max
BLOWER   Speed: 40m/s
Charger Voltage: 20V
Battery   Capacity: 4.0AH
Product Weight: 2.2KG (1 X 4.0 Battery & Charger)
Product Weigh t: 26 KG (2 X4.0Battery & Charger)

• The Voltage is measured without workload. initial battery voltage of H20CF02 reaches maximum of 21.6 voids while Nominal voltage is 20volts.

Only use the appropriate accessories intended for this tool.

INTENDED USE

The Leaf Blower is intended for residential use only. Use the blower outdoors to move yard debris as needed.

ASSEMBLY

1. Assembling & disassembling the Blower Tube (see Figure A&B) .
   

2. Installing & removing the battery pack .
   NOTE: Press the battery release button to release battery pack from your tool. After recharging, insert the battery pack into tool’s battery port. A simple push and slight pressure will be sufficient. (see Figure C&D)
   

3. Charging the battery pack. Your battery pack is UNCHARGED, you must charge before use. More details can be found in charger’s manual.

WARNING- The charger and battery pack are specially designed to work together, so do not attempt to use any other devices. Never insert or allow metallic objects into your charger or battery pack connections Because electrical failures can occur and cause dangerous. (See Figure E)

OPERATION

Starting & Stopping

WARNING- The tool will run after pushing the master switch forward (see Figure F) and the tool will stop run after pushing the master switch backward. Turn off the tool and let the motor come to a complete standstill before setting the tool down. (see Figure F)?

Adjusting the blowing speed with 6-speed switch Turn the 6-speed switch upwards to accelerate the air speed until it reaches the maximum speed level 6. (see Figure G)

To store your cordless blower
NOTE:You can store your cordless blower by hanging it on the wall with your own wall hanging support at the back of the blower. (Figure H)

USER TIPS

• Hold the blow tube approximately 8” (20cm)above the ground when operating the tool.
• Use a sweeping motion from side to side.Advance slowly keeping the accumulated debris/leaves in front of you.
• After blowing the debris/leaves into a pile,the fallen leaves are easy to clean.

TROUBLESHOOTING

charged, check whether the battery pack is installed properly (to avoid loosening, poor contact, etc.), and whether the machine is in the starting state. If it still does not work after the inspection, please contact us ([email protected]) to fix or replace it for you.
Cruise Control Lever doesn’t work?| First of all, check whether the battery is charged, check whether the battery pack s installed properly (to avoid loosening, poor contact, efc.), and whether the machine is in the starting state. If it still does not work after the inspection, please contact us ([email protected]) to fix or replace it for you.
“The air does not flow through the tube?| “TFirst of all, check whether the battery is charged, check whether the battery pack is installed properly (to avoid loosening, poor contact, etc.), and whether the machine is in the starting state. If it still does not work after the inspection, please contact us ([email protected]) to fix or replace it for you.
Are 5.0 Ah and 2.0 A batteries interchangeable if both are 20V?| Yes, no matter how big the battery capacity is, our machine can be used when the voltage is 20V-40V, but please note that the interface must be Makita’s interface.
How long can the machine work with a full charge?| t can be used for 20 minutes in the case of the highest gear 6th gear, and 50 minutes in the case of the lowest gear 1st gear, so the working time is 20-50 minutes.
How long does it take for a leaf blower battery to fully charge?| It will take approximately 110 minutes to fully charge battery.
Does the charger know when to stop charging the battery? Or will it keep charging if you leave the battery on it| This is an automatic charger. Just plug in the battery and go. It stops when done. (the adapter has an indicator light)Green means s fully charged, red means charging
Does the battery have to completely discharge before it can be recharged?| No, the battery doesn’t have to be completely discharge before it can be charged.

Tech Support: v[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>