Pylex 12073 Galvanized Steel Pergola Parts and Accessories Instruction Manual
- May 15, 2024
- Pylex
Table of Contents
- 12073 Galvanized Steel Pergola Parts and Accessories
- Specifications:
- Product Usage Instructions:
- Step 1 – Measurements:
- Step 2 – Installation of the Strip:
- Step 3 – Installation of C and D Parts:
- Step 4 – Installation of the Boards:
- Step 5 – Installation of E Parts:
- Step 6 – Installation of A Parts:
- Q: What should I do if I have missing or damaged parts?
12073 Galvanized Steel Pergola Parts and Accessories
“`html
Specifications:
- Product Name: Pergola Hardware Shutters
- Model Number: 12073
- Required Products: Product #12071 and Product #12072
- Possible Sizes: 9′ X 9′ up to 9′ X 12′
- Recommended Beam Size: 2 X 6 for a size of 9′ X 12”
- Tools Required: Refer to the provided list
- Maximum Board Length: 72 inches
Product Usage Instructions:
Step 1 – Measurements:
Attach the wood and let it dry for 2 to 3 weeks prior to
construction to prevent lumber warping.
Step 2 – Installation of the Strip:
Place the strip at the center of 2 X 4 beams and mark every hole
using a pencil. Repeat on every side.
Step 3 – Installation of C and D Parts:
Insert C and D parts as shown, screw on each pencil mark using I
screws. Ensure C parts rotate freely.
Step 4 – Installation of the Boards:
Measure the length and install boards of X 6 or 1 X 6, not
exceeding 72 inches. Repeat on every board.
Step 5 – Installation of E Parts:
Install E parts on the 6th board as instructed.
Step 6 – Installation of A Parts:
Install A parts on every section, ensuring plates are installed
on the specified side only. Do not over tighten the screws.
Frequently Asked Questions (FAQ):
Q: What should I do if I have missing or damaged parts?
A: Contact our customer service team at info@pylex.com or call
1-800-264-1881 for prompt replacements.
“`
INSTALLATION GUIDE
PERGOLA HARDWARE SHUTTERS
12073
TO BUILT A COMPLETE PERGOLA SEE INSTRUCTIONS ON THE BACK OF THE BOX. (Product
12071 and Product #12072 are required).
Question? – Contact us:
First contact our friendly customer service team for assistance. Email:
info@pylex.com or call: 1-800-264-1881 Monday to Friday: 8:30am to 4:30pm UTC
Replacement for damaged or missing parts will be shipped promptly.
Rev.: 32-0614
BEGINNER
EXPERIENCED
DECK AND FENCE HARDWARE WWW.PYLEX.COM / 1 800-264-1881
A
(40X)
D
(88X)
PARTS LIST
C
(88X)
B
G
(260X)
I
E (4X) F (1X)
H
(12X)
(1X)
(140X)
TOOLS REQUIRED
1/16″
POSSIBLE SIZES WITH THIS KIT
9′ X 9′
UP TO
9′ X 12′
2″ X 4″ BEAMS
IMPORTANT: IT IS RECOMMENDED TO USE 2″ X 6″ BEAMS FOR A SIZE OF 9′ X 12”
FOR THIS EXAMPLE WE ARE BUILING A 9′ X 9′ PERGOLA
STEP 1 – MEASUREMENTS
IMPORTANT: TO PREVENT LUMBER WARDING WE SUGGEST TO ATTACH THE WOOD AND LET IT DRY FOR 2 TO 3 WEEKS PRIOR TO CONSTRUCTION.
G1
REFER TO ANNEX AT THE END OF THE INSTALLATION GUIDE FOR SIZE CHART
G2 THIS SIZE CAN BE MODIFIED, REFER TO SIZE CHART
C
G1 G2
G1 G2
G2
G1
G2
G1
B
A
3
STEP 2 – INSTALLATION OF THE STRIP
G B
(3X)
IMPORTANT STEP
PLACE THE STRIP AT CENTER OF 2″ X 4″
49-½”
24-¾”
UNROLL “B” STRIP AND PLACE AS SHOWN
1-¾”
6th Hole
IMPORTANT CENTRAL HOLE
OF “B” SRTIP
1 2
3
4
STEP 2 – INSTALLATION OF THE STRIP (NEXT)
G
B
(3X)
Mark every hole using a pencil.
Once all the holes are marked the “B” strip can be removed.
5
STEP 2 – INSTALLATION OF THE STRIP (NEXT)
G B
(3X)
C
B
A
FRONT
USING THE SAME STRIP, REPEAT STEP 1 AND 2 ON EVERY SIDE POINTED BY ARROW.
IMPORTANT: MAKE SURE THE PENCIL MARKS
ARE FACING EACH OTHER ON EACH SIDE.
6
STEP 3 – INSTALLATION OF “C” AND “D” PARTS
C
(88X)
D
(88X)
I
(88X)
INSERT “C” AND “D” PARTS AS SHOWN.
I
D
C
A
REPEAT / 88 X
B
D
PIECE “C”
SCREW ON EACH PENCIL MARK USING “I” SCREWS. DO NOT OVER TIGHTEN,
“C” PART MUST ROTATE FREELY.
7
STEP 3 – INSTALLATION OF “C” AND “D” PARTS (NEXT)
THE “C” PARTS MUST ROTATE FREELY.
THERE MUST BE 88 “C” PIECES AS SHOWN
8
STEP 3 – INSTALLATION OF “C” AND “D” PARTS (NEXT) MEASURE THE DISTANCE BETWEEN
“L” SHAPE SUPPORTS (Repeat as they may not all be the same length)
A B C
9
STEP 4 – INSTALLATION OF THE BOARDS
H (252X)
Measure the length
USE BOARDS OF / “X 6″ OR 1″ X 6″
We recommand not to exceed 72 inches.
H
H
YOU MAY USE
A 6” #2
REPEAT THIS STEP ON EVERY BOARD.
Not included
10
STEP 4 – INSTALLATION OF THE BOARDS (NEXT)
E (12X)
H
(12X)
A
B
6
C
INSTALL 6 BOARDS AND THEN INSTALL “C” PART ON THIS 6th BOARD.
E
H
11
STEP 5 – INSTALLATION OF “E” PARTS
6
6
E
INSTALL ON THE 6th BOARD
6
4X “E” PARTS
6
12
STEP 6 – INSTALLATION OF “A” PARTS
A (40X)
I
(44X)
YOU MAY USE A 6″ #2
Not included
Do not over tighten the screws
13
STEP 6 – INSTALLATION OF “A” PARTS
REPEAT THIS STEP ON EVERY SECTION
INSTALL PLATES THIS SIDE ONLY
C
A
14
STEP 6 – INSTALLATION OF PARTS “A” (NEXT)
F
CLOSE
OPEN
15
TABLE
NUMBER OF BOARDS REQUIRED OPENING
3
14-5/16″
364 mm
4
18-11/16″
474 mm
5
23″
584 mm
6
27-5/16″
694 mm
7
31-11/16″
804 mm
8
36″
914 mm
9
40-5/16″
1024 mm
10
44-5/8″
1134 mm
11
49″
1244 mm
12
53-5/16″
1354 mm
13
57-5/8″
1464 mm
14
62″
1574 mm
15
66-5/16″
1684 mm
16
70-5/8″
1794 mm
17
75″
1904 mm
18
79-5/16″
2014 mm
(Product #11060 contains parts for 11 more boards)
TO BUILD A COMPLETE PERGOLA SEE INFORMATION ON THE BACK OF THE BOX.
G1
PLEASE NOTE THAT THE MEASUREMENTS IN THE WHITE CIRCLES ARE ROUNDED. USE THE
MEASUREMENTS IN THE BLACK SQUARES.
Part : 1 # 12071
(Sold separately)
16
Part : 2 # 12072
(Sold separately)
IMPORTANT MEASURES
1 2
10’½
From 9′ to 12′
G1
IMPORTANT MEASUREMENT
(13 Boards – 57-/8″)
1 2 3 4
12′
From 9′ to 12′
G1
IMPORTANT MEASUREMENT
(15 Boards – 66-/16″)
G1
G2
G2
ONE BOX OF PRODUCT #11060 MUST BE PURCHASED
1 2 3 4 5 6 7
14′
from 9′ to 12′
G1
IMPORTANT MEASUREMENT
(18 Boards – 79-/16″)
G1
G1
G2
G2
TWO BOXES OF PRODUCT #11060 MUST BE PURCHASED
10’½ 12′ 14′
PLEASE NOTE THAT THE MEASUREMENTS
IN THE WHITE CIRCLES ARE ROUNDED. USE THE MEASUREMENTS IN THE BLACK
SQUARES.
G2
G2
THREE BOXES OF PRODUCT #11060 MUST BE PURCHASED
17
Rate us!
Satisfied with your Pylex product? Please let us know by sharing pictures with
us at info@pylex.com
You can also write a review online about your purchase.
(By sending your image, you agree to give Pylex the right to it in its
marketing activities).
You liked our product?
Visit our website: www.pylex.com to see all our products or scan this QR code
to have access to our catalog!
Pylex Guarantee Certificate
Follow us on:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>