Pylex 11051 Steel HD Gate Kit Installation Guide
- June 4, 2024
- Pylex
Table of Contents
Pylex 11051 Steel HD Gate Kit Installation Guide
ENSEMBLE POUR BARRIÈRE ULTRA ROBUSTE
-
– Cut horizontal 2×4″s to the distance between post less 1 inch ( 2.5 cm ).
-
– Cut vertical 2×4″s to desired height.
-
– Assembled the 2×4″s to Simple Gate Kit brackets with included screws.
-
– Attach gate hinges to fence post with included screws. Attach fence boards to the gate frame.
-
– Couper les 2×4″ horizontaux a la distance entre vos poteaux moins 1 pouce ( 2.5 cm ).
-
– Couper les 2×4″ verticaux a la hauteur desiree.
-
– Assembler les 2×4″ aux supports a l’aide des vis fournies.
-
– Visser les charnieres aux poteaux du cote desire. Visser les planches sur la barriere.
NOTE : AS IS GOOD BUILDING PRACTICE, CONSULT YOUR LOCAL BUILDING CODE
NOTE : CONSULTER LE CODE DU BÂTIMENT LOCAL AFIN D’Y ÊTRE CONFORME
Made in China / Fabriqué en Chine