BEB Electronics BEBTWSS001 2 In 1 Speaker User Manual

BEB Electronics BEBTWSS001 2 In 1 Speaker

Please read the manual carefully and declare properly before using the product

Audio operation manual

Instruction for use

O :Press the button to turn on/off
+ :Play or pause, Answer a phone call/End the phone call — : Next song [Volume up
PM : In the link state, click Pause/Play, and double-click to make a call
M : Mode switch
Bluetooth Mode Radio Mode
TF : TF card port
AUX : AUX port
USB : USB port
Micro port : Micro charging port

Wireless Connection

1. urn on the audio switch, turn on the Bluetooth mode, search and find the BEBTWSS001 pairing link. Then connect. If you want to connect to a new device, first disconnect the paired device and pair it.

2. Wireless play After the wireless connection is successful, briefly press the button “play / pause music”.
   Press + to select the previous song.
   Press – to select the next song.

3. Volume up / down While playing, long press – to reduce the volume. When playing, long press + to increase the volume level.

4. Mode switch M Short press m to switch Bluetooth mode / radio mode Hands free call Answer / end the call: press the pause button, refuse to listen to the call, and long press the pause button for 2 seconds.

5. Tf: when inserting the rear TF card, the system will automatically enter the TF mode for operation.

6. Usb: after inserting USB, the system will automatically enter USB mode.

Specification Parameters

meters
input voltage| DC 5V
Headset charging time| About 1.5 hours
Charging time of char In box| About 3 hours
Automatic shutdown time| Not connected within 10 minutes
Charging times of headphones by charging box| About 6-7 times

Warnings And Precautions During Product Use

1. Do not use abrasive detergent to clean this product.
2. Do not let this product be heated or close to a fire source, such as a cooking stove.
3. Do not let this product be directly exposed to sunlight for a long time.
4. Do not discard this product in the fire to avoid explosion.
5. Do not try to disassemble this product to make any modifications,
6. If you do not intend to use this product for a long time, please store it in a dry environment, And char e the stereo at least once a month to extend its service li e and avoid extreme temperature and dust.

Earphone Operation Manual

This product is a new Bluetooth wireless product with audio and headset combined as one It provides more portable and comprehensive services for customers and friends And experience.

Parameters And Configuration

Wireless connection(tws)Realize wireless stereo sound, Left and right channel separation.
Bluetooth on the left and right headphones Can be used alone, It can also be used in one pair.

Bluetooth Connectivity

Pair with the mobile phone for the first time. When the mobile phone is turned on, take out the headset from the charging bin. Search for the corresponding device naming the Bluetooth of the mobile phone, and then connect it. Note: the call supports two earphones, play back or pause, which can be controlled by any earphone button connected with Bluetooth. The other earphone will be controlled synchronously, and can be connected back automatically the next time it is turned on.

Headphone Touch Function Description

Key: open and take out the headset for pairing

1. The red and blue light of Bluetooth connection flashes, and the red and blue light goes out after successful connection
2. Next song: double click left and right, previous song: three hits left and right
3. Click the left and right ears to answer the call in the incoming state
4. Double click the left and right ears to hang up in the call state
5. Press and hold for two seconds to reject the call in the incoming state
6. The red light of headset charging is on for a long time, and the red light of full charge is off

Warm tip : in order to prevent the headset from automatically turning on the Bluetooth mode, it is recommended that you turn off the Bluetooth device when not using the headset, so as not to waste the power of the headset and the device

Fcc Warning Statement

comply with the limits for a Class digital device, pursuant to Part 1 5 of the FCC Rules. These limits redesigned to provider reasonable protection gain’s harmful interference in residential installation. These equipment generates uses and can radiated of frequency energy and, if not installed and use disaccord with the instructions ,may cause harmful interference to radio communications. However ,the reinsurance tee that interference will not occurring particular installation. If this equipment does cause harmful interference to radora television reception, which  can be determined by turning the equipment toff and on, the use risen courage to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase The Separation Between The Equipment And receiver.
• Connect The Equipment intown outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This Device May Not Cause Harmful Interference, and (2)this device mustache tansy interference received, including interference that may cause des reoperation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>