TATTOO EZ Wireless Footswitch MT Instruction Manual
- May 15, 2024
- Tattoo
Table of Contents
TATTOO EZ Wireless Footswitch MT
OVERVIEW
FEATURES
- Compatible with P3 Pro/P2S Pro/EvoTech Pro and More To Come.
- Multi-Color LED Indicates Bluetooth Connection Status.
- Solid Construction and Innovative Minimalistic Design.
- Non-Slip Rubber Bottom for Enhanced Stability.
SPECIFICATION
| Dimensions(L x W x H) | 89 x 84×30 mm |
|---|---|
| Charging Voltage | SV |
| Weight | 6.6oz (187g) |
| Charging Port | USB-C |
| Recharging Time | 2hours |
| working time | Up to 120hours |
LED INDICATOR STATUS
- Scanning Mode: Red And Blue Lights Alternately Flash.
- Connection Successed: Blue Light Blinks (1 Blink Per Second).
- Low Battery Warning:
- Battery Level Below 20%, Red Light Flashes Rapidly.
- Battery Level Below 5%, Red Light Stays On Continuously.”
- Device Malfunction: Red And Blue Lights Stay On Simultaneously.
- Charging: White Light Stays On.
- Fully Charged: Yellow Light Stays On.
INSTRUCTION
- Use The Wireless Footswitch To Start/Pause The Wireless Tattoo Pen Machine.
POWER ON/OFF
- Slide The Switch To Turn On/Off.
PAIRING
- Turn On The Footswitch. The Flashing Red And Blue Lights Indicate That The Footswitch Is Ready For Pairing.
- Ensure That The Device’s Bluetooth Mode Is Enabled. It Will Automatically Connect To Your Footswitch.
- Once Connected, The Flashing Blue Lights On The Footswitch Will Indicate A Successful Connection.
WORKING MODE
- There Are Two Distinct Working Modes Of The Footswitch.
Maintain Mode
- In This Mode, Tap And Hold The Footswitch To Keep The
- Machine Running. Release The Footswitch To Pause The Device.
- Please Refer To The Tattoo Machine’s Manual For Activation Instructions.
Momentary Mode
- In This Mode, A Single Tap Will Start Or Pause The Device.
- Please Refer To The Tattoo Machine’s Manual For Activation Instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>