EZ TATTOO P3 Wireless Pen Machine User Manual
- June 3, 2024
- EZ TATTOO
Table of Contents
Make easy tattooing
P3 WIRELESS PEN MACHINE
OVERVIEW
SIX OPTIONS ADJUSTABLE STROKE OLED DIGITAL DISPLAY
TWO PRESET VOLTAGE MEMORY FUNCTION
BULIT-IN TIMER POSH MODE
P3 allows artist quickly adjust needle stroke, Hold the machine body and twist
innerring part. Each “click” show stroke length
SPECIFICATIONS
| Motor | EZ Customized Swiss Motor | Rpm | 10000rpm ± 10% |
|---|---|---|---|
| Material | Aircraft aluminum | Switch Freque cy | 60 – 160 Hz |
| Stroke Length | 2.5mm to 4.0mm | -d otrusion | 0 – 4,5 mm |
| Six Options Adjus oke | 2.5, 2.6, 2.8, 3.2, 3.6, 4.0mm | Dimensions(0 X L) | 3 x |
106 mm
Operating Voltage| 5 – 12V DC| Weig| 8oz (228g) with power pack
Color Available| Black, Red, Green, Sliver|
BASIC OPERATION
Power ON/OFF
Press and Hold the button for two seconds to turn P3 ON.
Press and Hold the button for two seconds to turn P3 OFF.
Power START/ STOP
Clik button to turn your machine Start or Stop.
Adjusting Voltage
Press + or – to adjust in 0.1V increments.
Press and Hold + or – to quickly adjust the voltage in 0.1V increments.
Start/ Stop Bulit-in Timer
Press + button to active your machine ON, the timing mode start.
Note: timer mode record in minutes, the maximum recording time is 999
minutes. the time is counting only when machine is running. The timer will
reset the count when the P3 is being restarted.
Changing Voltage Preset
DblClick button P3 will toggle between the voltage presets.
- Screen display “Lnr” preset LINER voltage.
- Screen display “Shd” preset SHADER voltage.
Note: The P3 will adjust the voltage to the saved voltage setting you stop on, the machine startup voltage is the preset for the last shutdown.
Push Mode
Press + and – button at the same time, Screen LOGO solid, the machine ACTIVE
the strong start mode.
Press + and – button at the same time, Screen LOGO flashes, the machine push
mode OFF.
Note: In push mode the initial voltage output is 12V lasts for 1 second and
then returns to normal voltage after.
Display
Voltage, Capacity and Timer display alternately every 5 seconds under the
machine working condition.
NOTICE:
To reduce the risk of injury, the user must read and understand the User
manual before using this product, Save these instructions for future
reference.
-We recommended that use the included charging cable.
-This device don’t support fast charging/super fast charging, Fast charging may get damage the battery.
BATTERY PROTECTION
The battery circuitry protects the battery pack from extreme temperature,
overdischarge, and over-charge.
To protect the battery from damage and prolong its life, The battery pack
circuitry will turn off the battery pack if it becomes overloaded or if the
temperature becomes too high during use. This may happen in extremely high
torque, binding, and stalling situations. The battery pack will shut down for
10s when its operating temperature exceeds 158°F (70°C), and will begin normal
operation when it returns to 152°F (67°C).
NOTICE: A significantly reduced run time after fully charging the battery
pack indicates that the batteries are near the end of their usable life and
must be replaced.
NOTICE: Lithium-ion battery packs are shipped partially charged. Before
using it the first time, fully charge the battery pack.
WARRANTY INFORMATION
If you find that the product is malfunctioning during the warranty period, EZ
provides a one-year warranty or the P3 wireles pen machine purchased in our
online store or authorized distributors worldwide form the date of purchase.
Warranties do not cover:
Damage to the product due to a human factor. Product damage due to axterrnal
electrical failure or any accident.
WARRANTY CARD
PRODUCT NAME:____
DATE OF PURCHASE:____
WHERE PURCHASED:
ADDRESS:____
EMALL:_
MY SIGNATURE BELOW ACKNOWLEDGES THAT I HAVE READ, FULLY UNDERSTAND，AND ACCEPT
THIS LIMITED WARRANTYAGREEMENT.
SIGNATURE:___DATE:__
SENT THIS COPY TO: EZTATTOO-AFTER-SALES DEPARTMENT 4/F BUILDING 7(7DONG)
NO.289 FAHUA NORTH ROAD
JINYI NEW DISTRICT JINHUA 321036 ZHEJIANG CHINA
TEL: +86-153-9755-3908
EMAIL: sales@eztattooing.com
Thank you for reading!
WWW.EZTATTOOSUPPLY.COM
@EZTATTOO OFFICAL
Created and Manufactured in China by EZ
WWW.EZTATTOOSUPPLY.COM
Created and Manufactured in China by EZ
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>