SSK SD301 Portable Solid State Flash Drive User Manual
- May 15, 2024
- SSK
Table of Contents
Portable solid state flash drive
User Manual
SD301
Before using the product, please read this user manual carefully
Parking List
1Portable solid state flash drive
1USB-A to USB-C Adapter
1*User Manual
Product Features
- Support USB protocol of computers, tablets, mobile phones and etc.
- The product has USB-A&USB-C dual interface, suitable for computers, tablets, mobile phones and other devices, with good interface compatibility
- Support Windows, Mac OS, Ipad OS, Android, Linux system
- SSD solid-state drive architecture, bringing continuous and stable high-speed reading/writing experience
- Use original 3D NAND FLASH, data security is guaranteed
- Metal shell, high-quality performance,sturdy and durable, good heat dissipation
- Capacity：128GB, 256GB, 512GB, 1TB, 2TB
Note before using
- Please keep the USB connector of this product clean. If it is dirty, please wipe it carefully with a soft and clean cleaning cloth.
- Please try to plug the product directly into the USB port of Windows PC, Mac, PS4/PS4 Pro, PS5, Xbox Series X/S, Xbox One, iPad Series or Android™ smart phone/tablet.
- Please back up important data, and the product warranty is limited to product hardware.
Description of storage capacity
-
There is a difference between the storage hardware manufacturer capacity calculation and the operating system identification capacity
-
Capacity calculation specifications of hardware manufacturers: 1GB=1024MB, 1MB=1024KB
-
Operating system capacity calculation specification:
1GB=1000MB, 1MB=1000KB -
Under different operating systems, if the memory is formatted, the formatted capacity will be less than the nominal capacity. According to the national standard GB/T 26225-2010, the actual usable capacity of the memory is greater than or equal to 90% of the nominal capacity, which is a qualified product
Compatible with USB interface
The supported host interfaces are as follows:
USB3.2Gen2X2 20Gbps;
USB3.2Gen2 10Gbps (i.e. USB3.1Gen2);
USB3.2Gen1 5Gbps (i.e. USB3.1Gen1/USB3.0); USB2.0;
*Note: the read and write speed may vary due to different host devices.
Connection and using
A. Connecting the Portable solid state flash drive:
Plug the product into a USB port on the host device as directed in the host
device user manual. (USB-C or USB-A )
Forcing insertion may damage the product or the USB port, and may even cause
it to deform and rupture.
Please be sure to correctly grasp the direction and force, and try to insert
this product into the USB port on the host device.
Improper insertion or incorrect orientation may prevent the product from
functioning properly.
B. Disconnect the Portable solid state flash drive:
When the host device is running normally, please follow the steps below to
remove the product from the USB port of the host device.
For Windows
- Click the Safely Remove Hardware and Eject Media icon in the lower right corner of the taskbar.
- Click “Eject XXX device” (here XXX is the Portable solid state flash drive).
- Wait for a while,and check if there is a pop-up prompt of “safely remove hardware”.
- Unplug the product.
For Mac
- Locate the product icon on the desktop.
- Use a “secondary click” (two fingers on the touchpad on a MacBook) to open the drop-down menu.
- Click “Exit”.
- Check if the icon of this product disappears, and disconnect after confirming.
For other host devices
Please refer to the user manual of the device for safe
QA
- The Portable solid state flash drive with fast read and write speed, and it is easy to generate a lot of heat. To ensure proper product function and prolong product life, heat needs to be conducted away. Therefore, it is normal for the product shell to heat up during use.
- When connecting to a desktop computer, please try to connect the product directly to the original USB interface on the computer motherboard. This type of interface is usually at the back of the case. The native interface can provide better power supply capability and more stable USB signal.
- In order to ensure the highest read/write speed of the product, please ensure that the USB cable used (if required) and the USB interface of the target host support the corresponding high-speed USB interface. In addition, the file storage location also needs to be SSD, otherwise the file read and write speed will be limited.
- The reading and writing speed is easily affected by the file type. Generally, the reading and writing speed of a large single or small number of files is the fastest, while the reading and writing speed of a large number of small files would be slower.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>