Aesfee AF-8029 Hair Clippers Men Professional Beard Trimmer Instruction Manual

Aesfee AF-8029 Hair Clippers Men Professional Beard Trimmer

Specification

• Product name: Hair Clipper
• Model No.: AF-8029
• Input: DC 5V / 1A USB Type-C Port
• Charge time: 5Hours
• Running time: 170 ~ 200 Minutes
• Lithium battery capacity: 2000mAh

Safety Warning

Don’t use while bathing or in the shower. Always switch off and unplug the appliance when cleaning or not use. Don’t use the appliance for any other purpose than described in this manual. Children should always be supervised to ensure that they do not play with this applicance.
Always check the appliance before you use it, don’t use the appliance if it is damaged. Do not attempt to repair or replace the battery. Please read the instructions carefully before use.
This appliance can not be used by children and the persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been give supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Charging the Appliance

Please recharge the appliance when the available time on the LCD is less than 10 minutes, the appliance with a USB type-C interface for charging. Please use the included USB cable to connect the appliance to a standard DC 5V output (USB charger, car charger, power bank or PC/Notebook) to charge it.
The plug icon on the LCD displays red when charging, and turns green when fully charged. It takes about 5 hours to fully charge, and can provide 170-200 minutes of use time depending on the speed.

Use the Appliance

1. Press and hold the On/Off Switch for 2 seconds to start the appliance,
   the speed of the appliance just after startup is 6000RPM.

Press and hold the On/Off Switch for 2 seconds to start the appliance, the speed of the appliance just after startup is 6000RPM.

Mount the Limit Comb

There are 5 sizes (1/2/3/4/5mm) of limit combs in the package,please choose the appropriate one according to your needs.

1. Align the limit comb with the cutter head.
2. The installtion can be completed by aligning the limit comb groove with the cutter teeth and press downward of the limit comb tail buckle.

Disassemble:
Press and hold the top of the limit comb,push upward the limit comb.

Cleaning and Storage:
To maintain the performance of the appliance, clean the cutter head with a brush after each use, or only rinse the cutter head under the tap and dry it with a dry cloth and drip oil on the cutter head.
Then store the appliance in a dry environment, make sure the appliance is dry before storing.

Warranty and Customer Support
12-month warranty from the date of the order, and lifetime customer support.
For questions, support and warranty services, please contact us by email: [email protected], and provide your Amazon order number and region, thank you

• Product Name: Hair Clipper

• Model No.: AF-8029

• Input: DC 5V / 1A USB Type-C Port

• Charge Time: 5Hours

• Running Time: 170 ~ 200 Minutes

• Lithium Battery Capacity: 2000mAh

• Aesfee International Limited

• Add: 1104, Block A, Zhongguan Times Square, No. 4168
  Liuxian Avenue, Nanshan District, Shenzhen 518055, China

• Website: www.aesfee.com

• E-mail: [email protected]

EU Representative:
EC REP| Oing UG (hartungsbeschrnk)
Undinestr. 7, 12203 Berlin, Germany

UK Representative:
UK
REP
p JunBright Ltd
51 Chalton Street, London, NW1 1HY England

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>