Aesfee AF-809 Waterproof Electric Beard Razor for Men Instruction Manual

June 14, 2024
Aesfee

Aesfee AF-809 Waterproof Electric Beard Razor for Men

Aesfee-AF-809-Waterproof-Electric-Beard-Razor-for-Men-
PRO

Welcome
Thank you for purchasing the Aesfee electric razor, designed to effectively shave beards and stubble longer. gives you a reliable close shave every time. The 3D razor head can follow every curve of your face and body neck, allowing you to shave easily and without irritating the skin. This user manual will give you a basic introduction that will allow you to quickly understand how to use yours rotary electric razor. please read carefully these instructions before use.

Safety warnings

  • Do not press the razor head too hard on the skin during shaving.
  • Close supervision is necessary when using this razor it is used by children or invalids.
  • Keep the razor in a place that children cannot reach to avoid misuse.
  • Only use the included USB cable to charge the shaver.
  • After shaving, please put the protective cap on cutter head to avoid damaging the cutter head.
  • Never place the razor in direct sunlight or store it in a package at a temperature above 60C / 140F.
  • When attaching the shaver head assembly onto the shaver unit After cleaning, Make sure the three buckles on the head assembly of the razor are completely occluded on the razor.
  • Please unplug the charge before cleaning the shaver.
  • Be careful when cleaning the razor head to avoid to scratch your hands.
  • If you find the razor head is damaged, stop using it immediately and replace a new razor head for avoid harming your skin.

Know your razor

Aesfee-AF-809-Waterproof-Electric-Beard-Razor-for-
Men-1

  1. Protective cap
  2. Assembling the razor head
  3. Release the button
  4. On/Off switch
  5. LED display
  6. Trimmer for pop-ups
  7. USB charging jack
  8. Cleaning brush
  9. USB charging cable

LED display description

  • The shaving time that the battery can provide comes displayed in minutes., The maximum number of viewing time is 60 minutes. The number flashes and increases during charging.
  • Trip lock function: This function prevents the shaver from starting unexpectedly, by default this feature is disabled.
  • When a freeze occurs, or used for 15 minutes cumulatively this icon flashes to remind you that you need to clean your razor.
  • The icon Lights up while charging. or the icon flashes when the available time drops to 5 minutes to remind you that you need to charge.
  • This icon flashes to remind you that it is Necessary cleaning because a lot of hair has affected the performance of the shaver.

Technical specifications

  • Charging voltage: 5V/1A.
  • Charging time: 1h
  • Working time: 60 minutes
  • Working Temperature: 0~40C / 32~104F
  • Product size: 1606060mm
  • Weight: 175g

Before charging

  • Charging for the first time or not used for a long time period, charge the shaver for more than 8 hours.
  • Charging at temperatures below 0°C /32°F or above 40°C/104°F negatively affects battery life
  • The charging symbol lights up when the charge is available of battery drops to 5 minutes, which means it is need to charge the battery

Reload

  1. The shaver is charged via a USB cable. Please Connect the shaver with USB cable to a DC 5V output port standard for charging, such as USB wall charger, PC/laptop, car charger, power-bank…etc. Use only the supplied USB cable.
    Please note: USB charger not included in the package.

  2. The charging symbol lights up and the battery charge indicator battery will start flashing and increasing.

  3. It takes about an hour for the razor to fully clean load. When the LED indicator is 60, it means it is fully charged.

How to use this razor

  1. Turn on the razor, move the razor straight or circularly along the direction of beard growth.

  2. Stretch the skin with a free hand, so that the razor can easily reach the shortest beard and shave Well. the 3D floating head can follow the contours of yours face for a precise shave.
    DO NOT press too hard to avoid damage the skin while shaving.

  3. Turn off the shaver.

  4. Attach the protective cap to the razor to protect razor heads.

Beard trimmer

  1. Turn on the shaver
  2. Push down the trimmer switch
  3. Hold the trimmer and move it down smoothly along the beard to complete the cut
  4. Turn off the trimmer, then press the trimmer

How to use the travel lock function
This is a very useful feature that prevents the razor from run unexpectedly in your bag when you travel.

  • Lock: Press and hold the On/Off switch for 3 seconds while the shaver is turned off to activate this function.
  • Unlock: Press and hold the On/Off switch for 3 seconds while the razor is turned off to unlock for shaving.
    Note: This feature will only take effect once enabled. It will not be valid after unlocking. If you still have need this function after shaving, turn this on function before putting the razor in your pocket.

Cleaning

Make sure the shaver is turned off and not connected to the USB cable for charging before cleaning.

Weekly cleaning

  1. Clean the cylinder head with the brush.
  2. Press the head release button to remove the head assembly from the shaver unit.
  3. Brush the inside of the shaver unit and blade assembly razor festival.
  4. reassemble the head assembly on the razor, making sure that the three snaps on the head are fully engaged with the razor This razor is washable so you can rinse it underneath the tap.

Deep cleaning (after two months of use)

  1. Press the head release button to remove the head assembly from the razor.
  2. Brush the inside of the shaver unit.
  3. Press down and turn the frame wheel clockwise counterclockwise, remove the frame and clean it with a brush.
  4. remove only one blade and one razor net at once, then brush and wash.
  5. Please don’t mix all blades and razor net, may slightly affect shaving performance.
  6. Brush the slits of the razor head. for performance optimal, the shaver head assembly should be cleaned in a degreasing liquid.
  7. Insert the blade into the razor net, slide the razor net razor in the frame, Make sure the blade is loaded correctly into the razor net track.
  8. Repeat the process for two more blades and two razor nets.
  9. reassemble the frame on the razor head assembly, press down and rotate the handwheel clockwise until locks into place.
  10. reassemble the shaver head assembly onto the shaver, making sure the three snaps on the header are completely grafted with the razor.

Memorandum
This is an IPX7 waterproof electric razor. you can use this electric razor for dry or wet shaving, also for shaving in the shower. For an experience of more comfortable shaving, we recommend using a shaving cream.

Warranty and customer support

15 months warranty and lifetime technical support from date of the order.
For questions, assistance, technical support or requests warranty, please contact us at the following address email, include your Amazon order ID, region, and name of the product model.
email: [email protected]

Aesfee International Limited
Add: 5/F, Building A,Longcheng Industrial Zone, No.39 Longguan West Rd,LongHua, Shenzhen, China
www.aesfee.com
[email protected]

EU representative:
EC REP: Qing UG (limited liability) Undinestr. 7, 12203 Berlin, Germany

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Aesfee User Manuals

Related Manuals