HICFM YM-609 Stand Mixer Instruction Manual

: May 15, 2024
: HICFM

Table of Contents

HICFM YM-609 Stand Mixer
Product Information
Product Usage Instructions
IMPORTANT SAFEGUARDS
GETTING TO KNOW YOUR 5.3 QT. STAND MIXER
OPERATION
TROUBLESHOOTING
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HICFM YM-609 Stand Mixer

Product Information

Specifications

Model: MIXER-SB5L
Capacity : 5.3QT
Material: Stainless Steel Bowl
Manufacturer: JIANGMEN LUQI TECHNOLOGY CO., LTD.
Address: No.18, Yuanshanzai Industrial Park, Xinchang, Pengjiang District, Guangdong Province, China
Contact: Jesse Lo
Phone No.: +86-18675098814
E-mail : sales7@yuweichang.net
Website: www.lukideas.com

Product Usage Instructions

Assembly

Before using the stand mixer, ensure all components are clean and dry. Attach the 5.3QT stainless steel bowl securely to the mixer base according to the manufacturer’s instructions.

Operation

Plug in the stand mixer and select the desired speed setting based on your recipe requirements. Add ingredients gradually to the mixing bowl while the mixer is running, ensuring even mixing.

Speed Settings

The mixer features multiple speed settings for different mixing tasks. Refer to the instruction manual for guidance on selecting the appropriate speed for your specific recipe.

Cleaning and Maintenance

After each use, unplug the stand mixer and disassemble the components for cleaning. The stainless steel bowl and attachments are typically dishwasher- safe for easy maintenance.

Safety Precautions

Always follow the safety guidelines provided in the instruction manual. Keep hands and utensils away from moving parts during operation to prevent injury.

(FAQ)

Q: Can I use the stand mixer for kneading dough?
A: Yes, the stand mixer can be used for kneading dough. Use a lower speed setting for dough mixing to achieve the desired consistency.
Q : Is the stainless steel bowl dishwasher safe?
A: Yes, the stainless steel bowl and most attachments are dishwasher-safe for easy cleaning.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

READ ALL INSTRUCTIONS.
This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they are closely supervised and instructed concerning the use of the appliance by a person responsible for their safety.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.
To protect against the risk of electrical shock, do not put the cord, plug, or Stand Mixer body in water or other liquid.
To disconnect, turn the speed control dial counter-clockwise to the ( 0) OFF position; then remove the plug from the wall outlet. Always make sure the Stand Mixer is OFF before putting on or taking off parts, before cleaning and when not in use. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Check to be sure the speed control dial is in the ( 0) OFF position before plugging the cord into a wall outlet.
Avoid contacting moving parts. Keep hands, hair, and clothing, as well as spatulas and other utensils, away from attachments during operation to reduce the risk of injury to persons and/or damage to the Stand Mixer. Do not attempt to defeat any safety interlock mechanisms.
Remove all attachments from the Stand Mixer before cleaning.
Do not let the cord hang over the edge of the table or counter or touch hot surfaces, including the stove.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Contact Consumer Service.
NOTE: DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. THIS WILL VOID THE WARRANTY.
The use of attachments not recommended or sold by the appliance manufacturer for use with this Stand Mixer may cause fire, electric shock, or injury .IMPORTANT : Use ONLY the mixing bowl included with this Stand Mixer. The use of any other non-fitting bowl may cause spills or damage to property or damage to the appliance.
Do not use outdoors.
Do not use the appliance for other than the intended purpose.
WARN INC: Do not overfill the mixing bowl. Do not fill more than half full. Maximum bowl capacity is 10 cups.
The container must be properly in place before operating appliance.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY ADDITIONAL IMPORTANT SAFEGUARDS

All users of this appliance must read and understand this instruction manual before operating or cleaning this appliance.
The cord to this appliance should be plugged into a 120V AC electrical outlet only.
If this appliance begins to malfunction during use, immediately turn the speed control dial counter-clockwise to the ( 0) OFF position and unplug the cord. Do not use or attempt to repair the malfunctioning appliance.
If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water!
Do not use this appliance after it has fallen into or becomes immersed in water.
To reduce the risk of injury to persons or property, never use this Stand Mixer in an unstable position
WARNING: To avoid spills, make sure the stainless steel bowl is properly locked in place on the base and the splash shield is centred over the bowl before turning the speed control dial.

NOTES ON THE PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

NOTES ON THE CORD

The provided short power-supply cord (or detachable power-supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do not use an extension cord with this product.

PLASTICIZER WARNING

CAUTION: To prevent Plasticizers from migrating from the finish of the counterupper or table upper or other furniture, place NONPLASTIC coasters or place mats between the appliance and the finish of the counterupper or table upper. Failure to do so may cause the finish to darken; permanent blemishes may occur, or stains can appear.

ELECTRIC POWER

If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

GETTING TO KNOW YOUR 5.3 QT. STAND MIXER

Product may vary slightly from illustration

Stand Mixer Head
Motor Base Head
Splash Shield with Filler Hole
5.3 Qt. Stainless Steel Mixing Bowl with Handle
Tilt Button
Speed Control Dial with ( 0) OFF, Speeds 1-12
Mixing Bowl Base
Non-Skid Feet
Polarized Plug (not shown)Attachments
Beater
Balloon Whisk
Dough Hook

BEFORE USING FOR THE FIRST TIME

Always unplug the Stand Mixer and check to make sure the speed control dial is in the ( 0) OFF position before inserting or removing attachments.
Wash mixing bowl and attachments in warm, sudsy water, rinse and dry.
Raise the mixer head. Firmly press the head tilt button to release and lift the Stand Mixer head. (Figure 1.)
Lock the mixing bowl onto the base. Insert the base of the mixing bowl into the bowl rest and turn clockwise until it is locked securely in place. (Figure 2.)
Add ingredients to the mixing bow l. (Figure 3.)

OPERATION

Make sure the speed control dial is in the ( 0) OFF position; with the mixing bowl, selected attachment (see Mixing Guide) and splash shield locked into position.
Plug the cord into a 120V AC electrical outlet.
Turn the speed control dial from Oto 1 to 4 to begin mixing at low speeds. Gradually turn the speed control dial to higher speeds as needed.
When mixing is complete, turn the speed control dial to ( 0) OFF.
Unplug the Stand Mixer when not in use and before cleaning.
Firmly press the head tilt button to raise the Stand Mixer head.
To remove any attachment, push the attachment shaft up into the mixer head, then turn the attachment clockwise to unlock and release. Pull the attachment straight down and off the shaft.
To remove the splash shield, firmly grasp and turn the shield counter-clockwise to unlock and remove it from the motor head.

MIXING GUIDE
The following mixing guide is a suggestion for selecting attachments and mixing speeds. Begin mixing on Speed 1 and increase to the desired speed, depending on the desired consistency.

MIXING TIPS

When mixing most batters, especially cake and cookie batters, add:

1/3 dry ingredients
1/2 liquid ingredients
1/3 dry ingredients
1/2 liquid ingredients
1/3 dry ingredients

Use slow stirring speeds until ingredients are blended. Gradually increase speeds until the desired consistency is achieved.
When using add-ins (chips, chunks, nuts, raisins) fold in during the last stages of mixing. Check to be sure the batter is thick enough to prevent fruits and nuts from sinking to the bottom of the bake pan.
Dust sticky fruits or fresh fruits in flour or confectioner’s sugar for better distribution in the batter.
Always begin mixing using the lower speeds until the ingredients are thoroughly combined.
Use the filler hole in the splash shield to add liquid or smaller ingredients while the Stand Mixer is in operation.
Mixtures containing large amounts of liquid ingredients should be mixed at lower speeds to avoid splashing. Increase speed only after the mixture has thickened.
When mixing thin batters, use medium speeds.
Stop the Stand Mixer periodically to scrape down the sides of the mixing bowl with a spatula.

BEATER TIPS
Use the Beater for normal to heavy mixtures.

Cakes & Cookies
Biscuits
Creamed Frostings
Mashed Potatoes
Pie Pastry
When preparing thick batters, butter or margarine should be at room temperature. Add ingredients one at a time, thoroughly mixing after each addition.
Add flour one cup at a time.
If the Stand Mixer seems to struggle, increase the speed setting.

BALLOON WHISK TIPS
Use the Balloon Whisk to incorporate air.

Sponge Cakes
Egg Whites
Mayonnaise
Heavy Cream
Boiled Frostings
Do not use the whisk for mixing thick mixtures, such as dough, fudge, or mashed potatoes.
Your Stand Mixer is designed to whisk a minimum of 3 large eggs, 6 large egg whites or yolks and a maximum of 15 large eggs, 15 large egg whites or yolks.

DOUGH HOOK TIPS
Use the Dough Hook to mix & knead yeast dough.

Breads & Rolls
Pizza Dough (Maximum 5 cups of flour for bread and pizza dough.)
Pastry
Pasta
Stop the Stand Mixer periodically to scrape down the sides of the mixing bowl with a spatula. Add flour one cup at a time.

USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user-serviceable parts. Do not try to repair it yourself. Contact a qualified appliance repair technician if the product requires servicing.

MANUAL THERMAL PROTECTOR
This product is equipped with a Manual resetable thermal protector to protect the motor. If the motor shuts down, turn the Speed Control Dial to the (0) OFF position, and then unplug the stand mixer. Let the unit rest for approximately half an hour . Once the resetting period has elapsed, plug the power cord back into the outlet and turn the Speed Control Knob to the desired setting to continue.
CARE & CLEANING INSTRUCTIONS
CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.

Before cleaning, turn the speed control dial to ( 0) OFF, then unplug from the outlet
The Stand Mixer mixing bowl, splash shield, beater, balloon whisk and dough hook are top rack dishwasher-safe.
Wipe the mixer head, motor base and body of the Stand Mixer with a damp cloth or sponge and dry thoroughly.

CAUTION: To avoid surface damage, never use rough scouring pads or abrasive cleansers on any plastic or metal parts. WARNING : DO NOT IMMERSE THE MOTOR BASE IN WATER.

STORING INSTRUCTIONS

Unplug and clean the unit.
Store in the original box or in a clean, dry place.
Never store the Stand Mixer while it is hot or plugged in.
Never wrap the cord tightly around the appliance. Never place any stress on the cord, especially where the cord enters the motor base, as this could cause the cord to fray and break.

TROUBLESHOOTING

A utensil is accidentally caught in an attachment.

Quickly turn the speed control dial to ( 0) OFF, then unplug from outlet.
Clear the obstruction
Allow the motor to cool for 5 minutes before continuing.

The Stand Mixer motor stalls.

Quickly turn the speed control dial to (0) OFF, then unplug from outlet.
Reduce the amount of mixture in the bowl
Allow the motor to cool for 5 minutes before continuing.

Food is not mixed.

Place liquid ingredients into the mixing bowl before adding dry ingredients.
Stop the Stand Mixer periodically to scrape down the sides of the mixing bowl with a spatula.
Increase speed.

Food splatters during mixing.

Mixtures containing large a ounts of liquid ingredients should be mixed at lower speeds to avoid splashing. Increase speed only after the mixture has thickened.
Splash shield is not in place. Make sure splash shield is properly attached before turning the speed control dial.

Stand Mixer travels on the counter top during mixing.

Reduce mixing speed.
Reduce quantity of ingredients in the mixing bowl.
Make sure countertop is clean to allow the non-skid feet to grip the countertop and reduce or eliminate any Stand Mixer movement.

The Stand Mixer stop working during mixing.

Turn the Speed Control Dial to the (0) OFF position, and then unplug the stand mixer.
Let the unit rest for approximately half an hour.
Plug the power cord back into the outlet and turn the Speed Control Knob to the desired setting to continue.