HICFM FAN-OW14 14 Inch High Velocity Wall Fan Instruction Manual

HICFM FAN-OW14 14 Inch High Velocity Wall Fan

Product Information

Specifications

• Model : FAN-OW14
• Power : 120V/60Hz, 0.5A
• Type : High-Velocity Wall Fan
• Indoor/Outdoor Use

Product Usage Instructions

Safety Precautions

• Before operating the fan, read and understand the owner’s manual to prevent serious injury or property damage.
• This product can be used indoors or outdoors with a proper GFCI plug.
• Unplug the fan before moving it or performing maintenance.
• Do not operate the fan when your hands are wet.
• Do not disassemble, repair, or rebuild the fan.
• Unplug the fan when it is not in use.
• Do not unplug the fan by holding the cable cord. Unplug it by holding the plug.
• Do not use the fan when there is damage to the cable cord or plug. If damaged, contact customer service for assistance.

Cleaning and Maintenance

1. Unplug the fan from the socket.
2. Clean the fan with a soft cloth. Do not immerse the fan in water.
3. Fit the guard onto the fan before starting it up.
4. Do not use this fan if you have reduced physical, sensory, or mental capabilities, or lack experience and knowledge, unlesssupervised or instructed by a person responsible for their safety.
5. Supervise children to ensure they do not play with the fan.

Assembly Instructions

1. Mark the desired hole locations using the wall bracket and then drill holes.
2. For concrete wall installation, after drilling, insert the wall anchors and tap them flush with the wall. Position the bracket and then screw the two bolts into the anchors, securely attaching it to the wall.
3. For wall stud installation, after drilling the smaller diameter pilot hole, position the bracket and screw the two bolts into the wall until they are secured.
4. CAUTION: The fan is only suitable for concrete wall and wall stud. Do not use for drywall mounting. Use the mounting accessories shipped with the product for wall mounting.

Operation Instructions

1. Test the GFCI (Ground Fault Circuit Interrupter) plug before each use. Plug the GFCI into a power outlet. Press the RESET button (b). The indicator (a) should turn red. Press the TEST button (c). The indicator (a) should turn off. If the test fails, do not use the fan and contact customer service.
2. Adjust the desired speed by using the pull chain switch with 3-speed control.
   • 0 – Stop
   • 1 – Low
   • 2 – Medium
   • 3 – High

Care and Maintenance

• Unplug the appliance before cleaning.
• Do not use water for cleaning metal surfaces.
• Slightly moisten a cloth and wipe off the surfaces of the fan.
• To remove dust from the grill, use a vacuum cleaner or remove the front grill by removing the securing screws on the edge of the grill.
• After cleaning, remount the grill and fasten the screws on the edge.

FAQ (Frequently Asked Questions)

• Q: Can this fan be used outdoors?
• A: Yes, this fan can be used indoors or outdoors with a proper GFCI plug.
• Q: Can I disassemble or repair the fan myself?
• A: No, do not disassemble, repair, or rebuild the fan. Contact customer service for assistance.
• Q: How should I clean the fan?
• A: Unplug the fan before cleaning. Use a soft cloth to wipe off the surfaces. Do not immerse the fan in water.
• Q: Can children use this fan?
• A: This fan is not intended for use by people (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the fan by a person responsible for their safety. Supervise children to ensure they do not play with the fan.

READ AND SAVE THESE INSTRUCTIONS
To prevent serious injury or property damage, read and understand the owner’s manual before operating. This product can be used indoors or outdoors with a proper GFCI plug. Questions, problems, missing parts? Before returning the product, please e-mail our customer service at hicfm@outlook.com

SAFETY INFORMATION

WARNING

1. Unplug the fan before moving it or performing maintenance. Don’t operate the fan when your hands are wet.
2. Do not disassemble, repair, or rebuild the fan.
3. Unplug the fan when it is not in use.
4. Do not unplug the fan by holding the cable cord. Unplug by holding the plug.
5. DO NOT use the fan when there is damage to the cable cord or plug. If the supply cord is damaged, it has to be replaced by the manufacturer, its service agent, or similarly qualified persons.
6. To Reduce The Risk Of Fire, Electric Shock, Or Injury To Persons, Do Not Use Replacement Parts That Have Not Been Recommended By The Manufacturer (e.g. Parts Made At Home Using A 3D Printer).
7. Do not use the fan close to fires.
8. Do not insert your hand or other objects into the guard or near movable parts.
9. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
10. Do Not Use An Extension Cord With This Fan.

CAUTION

1. Unplug the fan from the socket and clean it with a soft cloth.
2. DO NOT immerse the fan.
3. Fit the guard onto the fan before starting up the fan.
4. This fan is not intended for use by people (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the fan by a person responsible for their safety. Supervise children to ensure they do not play with the fan.

ASSEMBLY INSTRUCTION

1. Mark the desired hole locations by using the wall bracket, and then drill holes.
2. For concrete wall installation, after drilling, insert the wall anchors and tap them flush with the wall, position the bracket and then screw the two bolts into the anchors, securely attaching them to the wall.
3. For wall stud installation, after drilling the smaller diameter pilot hole, position the bracket and screw the two bolts into the wall until they are secured.

CAUTION : THE FAN IS ONLY SUITABLE FOR CONCRETE WALLS AND WALL STUDS.DO NOT USE FOR DRYWALL MOUNTING. USETHE MOUNTING ACCESSORIES SHIPPED WITH PRODUCTS FOR WALL MOUNTING.

OPERATION INSTRUCTION

1. Test the GFCI(Ground Fault Circuit Interrupter) plug BEFORE EACH USE.
   • Plug GFCI into a power outlet. Press the RESET button(b). Indicator(a) should turn red.
   • Press the TEST button(c). Indicator (a) should turn off. The  GFCl plug is tripped.
   • DO NOT USE FAN IF ABOVE TEST FAILS. Call customer service for assistance.
2. Adjust the desired speed by pulling the chain switch with 3 3-speed control.
   • stop
   • low
   • medium
   • high

CARE AND MAINTENANCE

1. Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces.
2. Slightly moisten a cloth and then wipe off the surfaces of the fan. In order to remove dust from the grill, use a vacuum cleaner or remove the front grill by removing the securing screws on the edge of the grill.
3. After cleaning, remount the grill. After doing this, fasten the screws on the edge of the grill.

1-YEAR LIMITED WARRANTY

The manufacturer warrants this product to be free from manufacturing defects in the material and workmanship under normal use for one year after the date of purchase by the original purchaser.

This warranty does not cover transit damages. This warranty does not apply to damages from an accident, misuse, or alteration of any kind to the fan or where the connected voltage is more than above the nameplate voltage. This warranty does not apply to the finish of any portion of the product. Servicing performed by unauthorized persons shall render the warranty invalid. The warranty is not responsible for damages of any kind, including accident and consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

REPLACEMENT PARTS LIST

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>