Edge-core ECS4125-10P Edgecore Wi-Fi Networks L3 Lite 2.5G Ultra PoE Switch User Guide

Edge-core ECS4125-10P Edgecore Wi-Fi Networks L3 Lite 2.5G Ultra PoE Switch User Guide

Package Contents

1. 2.5G L2 Ultra PoE++ Switch
   

2. Rack mounting kit—2 brackets and 8 screws

3. Power cord

4. Four adhesive rubber feet

5. Console cable—RJ-45 to DE-9

6. Documentation—Quick Start Guide (this document) and Safety and Regulatory Information

Overview

1. System LEDs
2. Console port
3. 8 x 10/100/1G/2.5G RJ-45 PoE ports
4. 2 x 1/10G SFP+ ports
5. Ground screw
6. AC power socket

System/Port LEDs

1. Sys: Green (OK), Blinking Green (booting), Orange (faulf)
2. PWR: Green (OK), Orange (maximum PoE budget)
3. RJ-45 1G Ports: Green/Blinking (link/activity), Orange (PoE link)
4. SFP+ 10G Ports: Green (10G), Orange (1G)

Installation

Warning: For a safe and reliable installation, use only the accessories and screws provided with the device. Use of other accessories and screws could result in damage to the unit. Any damages incurred by using unapproved accessories are not covered by the warranty.

Note: The drawings in this document are for illustration only and may not match your particular model.

1. Mount the Device
   
   

2. Attach the Brackets
   Use the included screws to attach the brackets.
   

3. Mount the Device
   Mount the device in the rack and secure it with rack screws.
   Note: The device can also be installed on a desktop or shelf using the included adhesive rubber feet. Ground the Device

4. Ground the Device
   
   Attach a lug (not provided) to a #18 AWG minimum grounding wire (not provided), and connect it to the grounding point on the rear panel. Then connect the other end of the wire to rack ground.

5. Connect Power
   
   Connect an AC power source to the device.

6. Make Network Connections
   
   RJ-45 PoE Ports
   Connect Cat. 5e or better twisted-pair cable.
   SFP+ Ports
   Install transceivers and then connect fiber optic cabling to the transceiver ports. The following transceivers are supported:

   • 1000BASE-SX/LX/EX/ZX and 1000BASE-T (RJ-45)
   • 10GBASE-SR/LR/ER/ZR

7. Make Management Connections
   
   RJ-45 Console Port
   Connect the included console cable and then configure the serial connection: 115200 bps, 8 characters, no parity, one stop bit, 8 data bits, and no flow control.

Hardware Specifications

• Size (WxDxH): 330 x 207.9 x 47.3 mm (12.99 x 8.19 x 1.86 in.)

• Weight: 2.41 kg (5.31 lb)

• Temperature
  Operating: 0° C to 50° C (32° F to 122° F)
  Storage: -40° C to 70° C (-40° F to 158° F)

• Humidity
  Operating: 10% to 90% (non-condensing)

• Power Consumption: 370 Watts maximum

• PoE Budget: 240 Watts

• Input Power Rating: 100-240 VAC, 50-60Hz, 4 A

Regulatory Compliances

• Emissions: EN 55032:2015/A1:2020
  EN IEC 61000-3-2:2019/A1:2021
  EN 61000-3-3:2013/A2:2021
  FCC Class A
  VCCI-CISPR 32:2016 Class A
  BSMI (CNS 15936)

• Immunity: IEC 61000-4-2/3/4/5/6/8/11 EN 55035:2017/A11:2020

• Safety: UL (CSA 22.2 No 62368-1 & UL62368-1) CB (IEC/EN 62368-1) BSMI (CNS 15598-1)

• Taiwan RoHS: CNS 15663

Warranty Information and Technical Support
Registering your product enables you to receive a more efficient warranty service. Be sure to register at www.edge-core.com.

References

• Edgecore Networks – Edgecore Networks, a leading provider of traditional and open network solutions, delivers wired and wireless networking products and solutions through channel partners and system integrators worldwide for data center, service provider,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>