ORIGINALE VOLPI YLB911-2 Record 20lt Plastic Pump Instruction Manual

ORIGINALE VOLPI YLB911-2 Record 20lt Plastic Pump

Product Information

Specifications:

• Brand: Davide e Luigi Volpi S.p.A.
• Model: HR Rucna lena pumpa
• Type: Manual knapsack sprayer
• Origin: Italy

Product Usage Instructions

Safety Instructions:

1. Read the instruction manual carefully before use.
2. Wear protective gloves and eye protection while operating the sprayer.

Preparation and Assembly:

1. Remove the cover and fill the tank with the prepared liquid through the tank’s filter inlet.
2. Ensure the liquid level does not exceed the bottom part of the filter.
3. Reassemble the cover by screwing it back on securely.

Warranty Information:
This pump comes with a legal warranty of 24 months in the European Union from the date of purchase. The warranty covers defects due to poor manufacturing or materials used. The product will be replaced or repaired free of charge if used correctly according to the instructions. Proof of purchase must be provided, and the warranty does not cover labor, material compensation, or transportation costs.

FAQ

• Q: What should I do if the sprayer is not working properly?
  A: Check if you have followed the assembly and operating instructions correctly. If issues persist, contact customer service for assistance.

• Q: Can I use any type of liquid in the sprayer?
  A: It is recommended to use liquids as specified in the user manual to ensure proper functioning and longevity of the sprayer.

SAFETY SYMBOLS

• Read the instruction manual carefully.
• Wear protective gloves.
• Use body protection.
• Use respiratory protections
• Wear eye protection.
• Do not spray towards people or animals.
• Do not use with solvents, oils or flammable products
• Do not leave the machine close to heat sources
• Do not leave the machine exposed to frost.
• Use the machine only between +1°C and + 40°C.
• Minimum distance between machine and other people 3m.
• Explosion and projection.
• Do not smoke during the use of the machine.
• Do not eat nor drink during the use of the machine.

Thank you for choosing an Original Volpi product.

INSTRUCTIONS FOR USE

These instructions for use are an integral part of the knapsack sprayer, they should be stored in a safe place and kept available in the vicinity of the device. Before operating the knapsack sprayer, or carrying out any maintenance operation, it is recommended to read carefully the information and warning herein contained, needed to use the device in the best possible correct and safe way.

WARNINGS

• This knapsack sprayer is intended to deliver aqueous solutions with density less than 1.1 and at a temperature not exceeding 40°C.
• It is important to strictly follow the instructions provided by the manufacturer of the substance dispensed.
• Do not use products/substances whose technical data sheets were not made available by the manufacturer.
• Under no circumstances you can use the knapsack sprayer with solvents, acids, flammable and explosive liquids, corrosive liquids, disinfectants, impregnating solutions and pesticides.
• Children and young people under the age of 16, as well as pregnant women can not use the knapsack sprayer, people with mentally and sensory disabilities can only use it if supervised by a person responsible.
• The knapsack sprayer is designed for manual use only.
• Use the knapsack sprayer only for its intended use.
• Improper use of the knapsack sprayer can result in hazardous situations.
• Always wear protective clothing and equipment to prevent contact with harmful or toxic products.
• Prepare the solution in an external container and not in the knapsack sprayer tank.
• Any wettable powders should be perfectly soluble and filtered.
• Be careful not to inhale vapours and droplets of the solution delivered.
• In case of accidental contact and inhalation, consult a doctor.
• Do not eat, drink or smoke during treatment.
• Do not blow into the nozzles with the mouth.
• Use the knapsack sprayer in well ventilated and not-windy areas.
• In the presence of wind, do not spray against it.
• Keep the knapsack sprayer away from children and pets.
• Do not spray near water with fish.
• Keep the knapsack sprayer away from heat sources, do not leave it exposed to direct sunlight and frost for long.
• Do not dispose of the unused chemicals into the environment.
• Do not tamper with the knapsack sprayer and its components.
• Do not pressurize the knapsack sprayer with external equipment (compressors, etc.).
• Do not unscrew the closure elements if the knapsack sprayer is under pressure.
• Before dismantling the knapsack sprayer, release all pressure.
• Do not pressurize the knapsack sprayer unnecessarily.
• Relieve pressure when not in use.
• Do not tamper with or modify in any way the knapsack sprayer.
• Before each use, check the condition of the knapsack sprayer.
• Do not leave it unattended when the tank is full and under pressure.
• The knapsack sprayer should always be placed on a horizontal and flat surface.
• After the use of the knapsack sprayer, thoroughly wash the hands, face, and clothing used.
• Repairs should only be carried out by customer service or authorized technicians.
• Use only original spare parts.

LIMITED LIABILITY
The manufacturer is not liable for damage caused by the knapsack sprayer if such damage is caused by a failure to heed the instructions for use, improper use, by a repair performed incorrectly or replacement of spare parts with non- original components, repairs not carried out by the customer service centre or by a trained technician authorized in writing by the manufacturer himself. The above instruction also apply to components and accessories.

PREPARATION OF THE KNAPSACK SPRAYER

MOUNTING THE LANCE
Lower the lever in the direction that you will follow to carry out the treatment. Loosen (Fig. 8) the ring nut of the lance by turning and pushing it towards the handle, making sure it completely fit into its seat, then tighten the ring nut by turning it clockwise. Mounting the hose: Completely introduce (Fig. 8) the end of the hose onto the relevant connector of the handle and tighten the ring nut by turning it clockwise. In case of a brass handle, use a screw clamp.

Mounting the shoulder strap: fold in half the shoulder strap and insert the folded side into the slot under the handle; secure it then with the plastic tab. Mount on the two free ends the hooks (Fig. 3) adjusting the length.

FILLING THE TANK
Remove the lid and fill the tank by pouring the liquid previously prepared through the filter of the mouth of the tank. The fluid level must never exceed the bottom of the filter. Replace the cover and screw it tight.

CONDITIONS OF USE
Attach the hook of a belt of the shoulder strap, lever side, to the protrusion at the bottom of the tank (Fig. 5). Insert the arm into the belt just hooked (Fig. 6) and place the knapsack sprayer on the shoulder. Grasp the other strap, carry it on the free shoulder and hook it in the same way described below for the other side. With the handle in the closed position, operate the knapsack sprayer until you feel some resistance, then spray, acting on the handle, continuing pumping regularly. Adjust the jet depending on the treatment to be carried out, by turning the terminal part of the sprayer. Choose the desired spray pattern (Fig. 7).

AFTER USE
Pour all the remaining liquid into a container and rinse thoroughly with clean water inside the tank and the hose, spraying clean water through the lance nozzle. Check that the filters are clean and that the water used for rinsing has completely emptied. Close the tap of the handle and store the knapsack sprayer upside down in a clean, dry place inaccessible to children, protected from sun and frost.

MAINTENANCE

Always keep clean, intact and greased all seals, valves, the pumping device and its components. The breakage or hardening of even one of these components may impair the proper functioning of the knapsack sprayer. Be careful to correctly reassemble the components. In case of poor dispensing quality, clean the end of the sprayer with clean water.

TECHNICAL DATA

• Maximum capacity: 12 litres – 16 litres.
• Maximum operating temperature: 1°C to 40°C.
• Maximum operating pressure: 3 bars

WARRANTY

This knapsack sprayer is covered by the legal warranty (in the European Community for 24 months from the date of purchase). The warranty covers all defects due to bad workmanship or poor materials used. The product, at the discretion of the manufacturer, will be replaced or repaired free of charge only if it has been used properly, in accordance with the instructions for use, and without having been tampered with. The product must be accompanied by proof of purchase. The warranty does not cover labour, compensation for resulting inactivity period or any cost for transport. This warranty does not cover parts subject to normal wear: seals, knapsack spraying handle and its components. Any maintenance operation carried out during the warranty period does not extend in any case its period of application.
For further information, please visit www.volpioriginale.it

TECHNICAL SPECIFICATIONS

Maximum cone opening position: 60°

Pressure [bar]| Flow rate [litres/minute]
0,5| 0,42
1,0| 0,59
1,5| 0,72
2,0| 0,83
2,5| 0,97
3,0| 1,12
Minimum cone opening position: 0°

Pressure [bar]| Flow rate [litres/minute]
0,5| 0,64
1,0| 0,90
1,5| 1,11
2,0| 1,28
2,5| 1,45
3,0| 1,57

Do not use with pesticides.

Davide e Luigi Volpi S.p.A.
Via San Rocco,10 – 46040 Casalromano (MN) – Italija
Tel. +39 0376.76009 – 76012
Faks +39 0376,76408
www.volpioriginale.it
E-mail: commerciale@volpioriginale.it
export@volpioriginale.it

References

• Volpi Originale — Attrezzature professionali per il giardinaggio
• Volpi Originale — Attrezzature professionali per il giardinaggio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>