VOLPI ORIGINALE V-BLACK VITA 16 Shoulder Electric Sprayer User Manual
- June 10, 2024
- VOLPI ORIGINALE
Table of Contents
- VOLPI ORIGINALE V-BLACK VITA 16 Shoulder Electric Sprayer
- Product Information
- Product Usage Instructions
- INTRODUCTION
- OVERVIEW
- SAFETY SYMBOLS
- HANDBOOK DESCRIPTION
- SPRAYER DESCRIPTION
- GENERAL INSTRUCTIONS
- TRANSPORT AND HANDLING INSTRUCTIONS
- INSTRUCTIONS FOR USE
- MAINTENANCE
- PROBLEMS – CAUSES – SOLUTIONS
- INSTRUCTIONS FOR DISMANTLEMENT AND DISPOSAL
- WARRANTY
- CE DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VOLPI ORIGINALE V-BLACK VITA 16 Shoulder Electric Sprayer
Product Information
The V-BLACK VITA is an electric shoulder sprayer manufactured by Davide e Luigi Volpi S.p.A. It comes with a lithium rechargeable battery and an electronic pressure regulator that maintains a constant pressure throughout the battery life. It has a capacity of either 12 or 16 liters, depending on the model. The sprayer is equipped with padded shoulder straps, an adjustable brass nozzle, and a pressure control system. It also has an auxiliary socket, an aluminum lance, and a screw cap with a lance holder. The product is certified under ISO 9001 quality system management and is available in Italian, English, German, French, and Portuguese.
Product Usage Instructions
- Before using the sprayer, make sure that it is not exposed to heat sources or frost.
- Do not disassemble the battery or expose it to flames as it may explode.
- When using the sprayer, wear protective clothing and gear to avoid contact with harmful or toxic substances.
- Charge the battery fully before using the sprayer.
- Fill the tank with the desired liquid, making sure not to exceed the recommended maximum capacity.
- Adjust the pressure and nozzle according to your needs.
- Turn on the sprayer and begin using it according to your requirements.
- After use, clean the sprayer thoroughly and store it in a cool, dry place away from direct sunlight.
Following these instructions will ensure safe and effective use of the V-BLACK VITA electric shoulder sprayer.
INTRODUCTION
Our congratulation for the choice made. The main features of our electric sprayers are the high quality of their parts and their long-lasting lifetime. They have been studied to resist any weather condition and they guarantee a maximum efficacy with the lowest power waste. As all our other products this sprayer went through accurate and precise tests; if it is used according to the instructions below, it will meet your needs for many years and a very reliable spare-parts service will give you the possibility to make repairs with original parts for a long time.
OVERVIEW
SAFETY SYMBOLS
HANDBOOK DESCRIPTION
INTRODUCTION
Please kindly study very carefully this instruction handbook before any
setting, use, maintenance or any other imaginable operation of/on the sprayer.
A correct use of the sprayer and an effective and rational maintenance allows
you to keep the sprayer in the best working conditions without reducing its
efficacy and safety. The present instruction handbook was drawn up in
conformity with the indications included in ENCLOSURE I of the MACHINERY
DIRECTIVE 2006/42/CE” and is considered an integral and essential part of the
sprayer. This handbook must be kept close to the sprayer and ready for
consultation; it must be kept together with the sprayer during its whole
lifetime, from the starting test until the final dismantling.
PURPOSES AND LIMITS OF THE HANDBOOK
This manual is intended for the use of:
- Describe the operation and conditions for use of the sprayer.
- Show the main technical features of the sprayer.
- Provide the correct instructions for use.
- Underline the potential risks and/or possible dangerous situations.
- Provide instructions for maintenance and repair.
- Enable understanding of possible operational problems and how to solve them.
In addition to the observance of the instructions contained in this handbook, the use of the sprayer depends on the respect of all the safety rules in force.
SPRAYER DESCRIPTION
TECHNICAL FEATURES
The Sprayer “V-BLACK VITA” was produced for dispensing liquid solutions
avoiding temperatures that exceeds 40°C.
23VBE12 | 23VBE16 | |
---|---|---|
Tank capacity | 12 Lt | 16 Lt |
Tank material | Polypropylene | Polypropylene |
Sprayable liters for each battery charge | With 2.0 bar pressure, up to 95 | |
liters | With 2.0 bar pressure, up to 95 liters | |
With 5.0 bar pressure, up to 75 liters | With 5.0 bar pressure, up to 75 liters | |
Sprayable liters for each battery charge | Up to 255 liters | Up to 255 liters |
Rechargeable lithium battery | 14,4 Vdc 2,0 Ah 28,8 Wh | 14,4 Vdc 2,0 Ah 28,8 Wh |
Nozzle supplied | Adjustable brass nozzle for spraying | Adjustable brass nozzle |
for spraying
Electronic pressure regulator| Adjustable working pressure 0.5 to 5 bar –
7.25 to 72.5 psi
| Adjustable working pressure 0.5 to 5 bar –
7.25 to 72.5 psi
Pressure control
| Electronic board with voltage control that keeps constant pressure
throughout battery life| Electronic board with voltage control that keeps
constant pressure throughout battery life
Battery charge control| Led| Led
Extra outlet| For 4-nozzle bar connection on trolley (optional)| For 4-nozzle
bar connection on trolley (optional)
Aluminum lance| Standard| Standard
Screw cap with lance holder| Standard| Standard
Padded shoulder straps| Standard| Standard
Battery charger| 1,0 A – 18W| 1,0 A – 18W
Gaskets| NBR (high tensile strength – resistance to mineral oils and greases)|
NBR (high tensile strength – resistance to mineral oils and greases)
Pump| High performance diaphragm with pressure switch| High performance
diaphragm with pressure switch
Delivery hose length| 1,2 mt| 1,2 mt
Filling diameter| 105 mm| 105 mm
Min./max. temperature| 5° C / 40° C| 5° C / 40° C
Dimensions| 220 x 360 x 510| 220 x 360 x 570
Sprayer weight (empty) with battery| 3,1 Kg| 3,2 Kg
ALLOWED ENVIRONMENTAL CONDITIONS
The environmental conditions where the sprayer can work are: Temperature:
5÷40° C; Humidity: 0÷70% (not condensed). It is also necessary to put the
sprayer protected from bad weather, sunrays and cold weather, in a clean and
dry place.
WARNING : THE SPRAYER IS NOT SUITABLE TO BE USED IN ENVIRONMENT UNDER EXPLOSION RISK CONDITIONS.
NOISE AND VIBRATIONS
The vibrations and noise produce while using the sprayer is largely below the
disturbance threshold by law and cannot cause harm to the operator.
GENERAL INSTRUCTIONS
SAFETY WARNINGS AND CAUTIONS TO BE OBSERVED
In spite of the adopted cautions, the sprayer may involve dangerous situations
and potential risks in the working area. It is necessary to analyze carefully
the potential presence of these dangerous situations and risks in order to
assure safe working procedures, appropriate behaviour rules and to plan
individual protective devices.
- DURING USE OF THE SPRAYER, THE OPERATOR MUST FOLLOW SAFE WORKING PROCEDURES AND FOLLOW THE SICURITY RULES AND REGULATIONS.
- Do not use products whose toxicological features are unknown. Use exclusively products authorized by the Public Health Ministry, carefully respecting all the instructions listed on the packaging.
- For children, teen-agers and pregnant women it is strictly forbidden to use the sprayer.
- Do not use in case of tiredness, illness or under the effect of alcohol, drugs or medicines that can affect the physical and mental state.
- Do not spray solvents, acids and inflammable liquids.
- Always wear protective clothes and devices, in order to avoid any contact with harmful and toxic products:
- Hand protection
- Body protection
- Respiratory protection
- Eye protection
- Carefully avoid breathing fumes or drops of the chemical solution: in case of accidental contact or inhalation call the doctor.
- Do not eat or smoke while using the sprayer
- Use the sprayer in well airy and illuminated areas, not windy or shady.
- Do not use the sprayer upwind.
- Use the sprayer at least 6mt away from people or animals.
- Keep the sprayer far from children and domestic pets; do not spray close to fish aquariums.
- Do not eat treated fruits or vegetables before the date foreseen by the chemical product manufacturer and, in any case, wash them very carefully.
- Do not pressurize by means of under pressure devices.
- Do not disperse the remaining chemical solutions in the environment.
- After using the sprayer, carefully wash hands, face and clothes.
- Do not leave the sprayer out in bad weather conditions.
- The user is responsible for the fact that the sprayer is maintained at optimal operating conditions so the sprayer can function in a proper and safe way. Parts and accessories of the equipment must be replaced when they no longer assure a correct function of the sprayer.
PROHIBITIONS
- It is forbidden to modify the sprayer’s parts.
- It is forbidden to apply devices or accessories to the sprayer without the authorization of DAVIDE E LUIGI VOLPI S.P.A.
- It is forbidden to use solvents, such as alcohol, gasoline solvents or thinner, for the cleaning of the sprayer.
TRANSPORT AND HANDLING INSTRUCTIONS
- The transport of the sprayer must be realized using all the necessary cautions in order to avoid damages.
- When transporting the sprayer please make sure the switch on/off is always off.
- During transport, the tank must always be empty or, if not possible, safely fixed in order to avoid accidental outpours of liquid.
- During transport and storing, do not put the sprayer on or under other material.
- When moving the sprayer, it is recommended to avoid bumps, which could damage the product.
INSTRUCTIONS FOR USE
SETTING OF THE SPRAYER
- Insert the locking nut D1 onto delivery hose D.
- Insert delivery hose D onto hose holder D2
- Insert the hose holder D2 into the housing of the base A 23VBE12) B (23VBE16).
- Screw the locking nut D1 onto the base all the way down and tighten firmly.
- Unscrew the locking nut D1 from the handle E.
- Insert the locking nut D1 onto the delivery hose D.
- Insert the delivery hose D onto the hose holder D2.
- Screw the locking nut D1 onto the handle E.
- Screw the lance F (23VBE12) G (23VBE16) onto the handle E
- Screw the brass sprayer F1 onto the lance F (23VBE12) G (23VBE16).
- Open the side door and insert the battery all the way in. Insert the battery oriented as showed in the picture.
- Close the door again, verifying that the door is properly locked.
- Insert filter Q into the appropriate housing inside the tank.
- Hook the shoulder straps H to the sprayer body as showed in the picture (23VBE12).
- Hook the padded backrest H to the sprayer body as showed in the picture (23VBE16)..
FILLING OF THE TANK
Prepare the solution in a specific container. Unscrew the cap of the tank and
pour the prepared solution through the filter. Carefully screw the cap.
WARNING:
Do not prepare the solution in the sprayer tank but always in a separate
container. Do not ever pour the solution into the tank without the use of the
filter
POSITIONING OF THE SPRAYER
Put the sprayer on a flat surface at a useful height, in order to put the
sprayer on your shoulders easily, with the belts previously adjusted. If you
need to adjust the belts, put the sprayer on a flat and raised surface, remove
your arms from the shoulder belts and adjust the length through the buckles.
SPRAYER START-UP
- Turn on the pump by turning the knob W clockwise.
- The red-colored led Z indicates that the machine is on.
- The four green-colored leds T indicate the battery charging status.
- 4 leds = 100% battery
- 3 leds = 75% battery
- 2 leds = 50 % battery
- 1 led = 25 % battery
- If the battery is low, recharge it following the instructions in section 6.2.
- Move the lever on the handle to start spraying
- Use the electronic pressure regulator W to manage the desired working pressure.
- When releasing the handle lever, the pump stops automatically interrupting the spraying of the liquid
WARNING : The sprayer is equipped with electronic board with voltage control that keeps the set pressure constant throughout the life of the battery.
Auxiliary socket S is the configuration for using the pump on trolley with the 4-nozzle spray boom (optional).
WARNING : Never let the sprayer work when the tank is empty.
WARNING: Avoid discharging the battery completely; when the battery is getting low, you need a full recharge. Completely recharge the battery before storing the sprayer for a long time.
NOZZLE REGULATION
This sprayer is supplied with adjustable con nozzle F1. Screwing or unscrewing
the final part of the nozzle F1, it is possible to adjust the diameter of the
“rose” spray until you get the “jet”.
Adjustable brass nozzle for spraying (Cod. 928)
PRESSURE
bar
| FLOW RATE
Lt / min
| Sprayable liters for each battery charge
5,0| 0,60| 75
4,0| 0,54| 85
3,0| 0,49| 90
2,0| 0,44| 95
OPERATIONS TO BE CARRIED OUT AT TERMINATION OF WORK
When finishing work, pour the remaining liquid in a specific container and
carefully rinse the internal of the tank and the hose letting it flow through
the lance with clean cold water. Check that the water used for rinsing has
completely come out. Turn off the pump by turning knob W counterclockwise and
check that led Z is off. After having cleaned the tank, remove, clean and
reassemble the filters (Q and P). Unscrew the nozzle F1 from the lance F-G;
disassemble the nozzle and clean the two parts with clean water, paying
attention not to damage or loose the OR. Clean the handle using a damp cloth
without soaking it in water. Unscrew the nut D1; remove the hose from its
holder; remove the hose holder with filter and wash it with clean water; then,
reassemble all the parts. Remove from the tank eventual materials or objects
that could damage the sprayer. Wear clothes and protective devices during
these activities.
WARNING: Do not disperse the rinsing water neither the remaining solution in the environment; it is recommended to pour all these liquids in specific drains, suitable for water purification and drainage. Turn off the pump by turning knob W counterclockwise and check that led Z is off after every use. Keep the sprayer out of reach from children, protected from sunrays and cold temperatures and with completely charged battery
CHANGE OF LIQUID IN THE TANK
In case a change of the liquid inside the tank is necessary, follow the
instructions given in point 5.6 and after that, the instructions in point 5.2.
MAINTENANCE
INTRODUCTION
A correct use of the sprayer and a regular maintenance are necessary to keep
the sprayer in the best working, efficacy and safety conditions.
Use exclusively original spare-parts.
BATTERY RECHARGE
The sprayer powered by a sealed storage battery, rechargeable with the
supplied battery charger N. In order to handle the battery in a safe way it is
necessary to follow the below listed instructions:
- Keep the battery away from high temperatures (ex. flames).
- Do not open the battery.
WARNING : During the recharge operations, follow safe working procedures and carefully observe the general safety rules. In order to recharge the battery, follow these instructions:
- Turn off the pump by turning knob W counterclockwise and check that led Z is off
- Check that the network voltage corresponds to the indication printed on the battery charger plate N.
- Open the side door and pull out the battery.
- Connect the battery charger N to a suitable and electrically protected current-socket.
- Insert the battery charger plug into the battery slot.
- To recharge the battery completely, you need 2 hours.
- At the end of the re-charge it is recommended to disconnect the battery charger from the power network first and then from the battery;
- During long periods of inactivity, check that the led Z is off.
The battery life mostly depends on the observance of some important rules:
- Do not create a short-circuit.
- Do not discharge it excessively: when the battery is almost discharged, charge it immediately.
- Promptly recharge it with the general on/off switch turned off and respecting the necessary time of charging.
- For the recharge exclusively use the battery charger supplied with the sprayer.
- Do not turn the sprayer on when the battery charger is connected.
- After the complete recharge keep the battery between 5 and 40° C.
- In case of long stocking or non-use, recharge the battery every four months.
When the battery is no longer rechargeable it is necessary to replace it with another one with the same sizes and features, respecting the connection polarities; the old battery shall be taken to an authorized collecting point
PROBLEMS – CAUSES – SOLUTIONS
PROBLEMS | POSSIBLE CAUSES | SOLUTIONS |
---|---|---|
When activating the handle lever, no water is coming out | Motor does not work | |
General switch off | Turn on general switch | |
Exhausted battery | Replace or recharge | |
Blocked pump | Contact the service centre | |
Broken cable | Contact the service centre | |
Engine failure | Contact the service centre | |
Motor works | Clogged nozzle | Clean |
Clogged tank filter | Clean | |
Clogged handle filter | Clean | |
Defective pump | Contact the service centre | |
Little water comes out when pressing the handle lever | Pressure regulator | |
at minimum | Raise the regulator | |
Dirty nozzle filter | Clean | |
Dirty handle filter | Clean | |
Defective pump | Contact the service centre | |
Dirty nozzle | Clean | |
Battery working time is not as expected | Lower working time | Battery not fully |
charged | Recharge the battery | |
Defective battery charger | Replace | |
Exhausted battery | Replace | |
No endurance | Broken cable | Contact the service centre |
Defective battery charger | Repair or replace | |
Exhausted battery | Replace |
INSTRUCTIONS FOR DISMANTLEMENT AND DISPOSAL
To dismantle the sprayer, it is necessary to operate according to laws in
force, contacting, if necessary, specialized companies in materials disposal.
The sprayer is made of non-dangerous materials:
- Plastic and synthetic materials;
- Iron metals (steel) and non-iron metals (aluminium-brass-copper);
- Electric battery
WARRANTY
24 months warranty for private users and 12 months warranty for professional users. It covers core parts, including Li-battery, charger, motor and transmission mechanism. Following conditions invalidate the warranty:
- Any abnormal operation
- Product not maintained as per the Maintenance Instruction
- Product modifications
- Any damages even if made by mistake
- Damaged after amateurish repairing.
- Nature caused damages
- Battery not recharged with the requested frequency
- Components subjected to wear during normal operation are not covered by warranty.
The warranty is valid only for products that have been registered through the website within 30 days from the purchase date. Activate the warranty for your new product Originale Volpi through our website:https://www.volpioriginale.it /registra-il-tuo-prodotto/
The buyer must also keep a copy of the sales document (receipt, invoice) and of the warranty registration: a copy of these documents must be given to the Dealer or Authorized Customer Service together with the machine to be repaired. In the absence of these documents, the machine will in any case be considered out of warranty.
CE DECLARATION OF CONFORMITY
Davide e Luigi Volpi S.p.A. Via San Rocco, 10 – 46040 Casalromano (MN) Italy
www.volpioriginale.it –
info@volpioriginale.it
References
- Volpi Originale — Attrezzature professionali per il giardinaggio
- Registra il tuo prodotto — Volpi Originale
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>