DELIPOP 20141608 Industrial Pendant Light Instruction Manual
- June 17, 2024
- DELIPOP
Table of Contents
DELIPOP 20141608 Industrial Pendant Light
Package Contents
- Screw 1*2
- Shade 1*3
- Lamp Frame 1*1
- Ceiling Cap 1*1
Assembly Instructions
- Attach the screw to the lamp frame.
- Fit the shade onto the lamp frame and secure it.
- Connect the lamp frame to the ceiling cap.
Installation Steps
- Turn off the power supply before installation.
- Remove the existing ceiling lamp, if necessary.
- Secure the ceiling cap to the ceiling.
- Adjust the length of the lamp as desired.
- Connect the wires from the lamp to the power supply.
- Secure the lamp to the ceiling cap and ensure it is fastened properly.
- Turn on the power supply and test the lamp.
Specifications
| Component | Quantity |
|---|---|
| Screw | 2 |
| Shade | 3 |
| Lamp Frame | 1 |
| Ceiling Cap | 1 |
Electrical Connection Guide
- Ensure the circuit breaker is in the OFF position before starting.
- Connect the appropriate wires from the lamp to the corresponding connectors in the power supply.
- Once connections are secure, switch the circuit breaker to the ON position to restore power.
FAQ
What should I do before installing the ceiling lamp?
Always turn off the power supply at the circuit breaker before starting the installation process to ensure safety.
How do I adjust the length of the lamp?
Adjust the length by pulling the lamp up or down before securing it to the ceiling cap. Ensure the length is as desired before completing the installation.
Can I install the lamp by myself?
It is recommended to have a qualified electrician install the lamp or follow the installation guide carefully. If you are not familiar with electrical installations, seek professional assistance.
How do I know if the lamp is securely fastened?
Ensure the DELIPOP 20141608 lamp is securely fastened by verifying all parts are correctly assembled, screws are tightened properly, and the lamp is stable without wobbling.