amazon basics B09HSVD9H2 Straight Cut Router Bit Set Instruction Manual
- June 15, 2024
- amazon basics
Table of Contents
amazon Basics B09HSVD9H2 Straight Cut Router Bit Set
Important Safeguards
DANGER Risk of suffocation! Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
- Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
- Router bits can be very sharp. Wear protective gloves when fitting or changing router bits. : Aways we are reactive gotes tamping tom the ros, EN iS 21420 or EN 388) during the work.
- Always wear eye protection, hearing protection, and a dust mask in the work area at all times. Discard immediately if any chipping or cracking of this product has occurred.
- Do not repair or regrind the router bits.
- Dull or damaged router bits must be discarded.
- Keep the product away from children and pets
- The product should only be used by persons with training and experience who have knowledge of how to use and handle the product.
Intended Use
- canister notes to another purpose Away allow the router The router is ital yet spotters, ds or automatic and portable routers.
Operation
CAUTION Risk of injury! Router bits are sharp, take precautions when handling them.
NOTICE
- Bet routing rotates data very chest the side into the inner cutter bit.
- The router is treated very high set, and into heat up the courter bit. moved too slowly through the wood which may cause burn marks
Tips
- When working on outside edges, move the tool counter-clockwise. When working on inside edges, move the tool clockwise.
- The router bits have a side and bottom cutting edge and can be used for functional or decorative cuts. The router bits are used for rabbeting, tenons, inlays, mortises, dados, and box joints.
- When cutting wood materials containing glue, the sharpness of the milling cutter is reduced faster compared to cutting softwoods and hardwoods.
- For a better finish for hardwoods, do a second pass, especially for extra-large cuts.
- Perform practice cuts with scrap materials before working on the actual piece.
Cleaning and Storage
- To clean the product, wipe with a damp cloth. Rinse the parts and let all parts dry completely.
- Never use corrosive detergents, wire brushes, abrasive scourers, or metal or sharp utensils to clean the product. See out be identified or stonest up if it. Store each router bit inside the bit case.
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader
contact
- UK: amazon.co.uk/review/review-your-purchases#
- If you need help with your Denali product, please use the website or number below.
- US: amazon.com/gp/help/customer/contact-us
- UK: amazon.co.uk/gp/help/customer/contact-us
- +1 877-485-0385 (US Phone Number
Read User Manual Online (PDF format)
Loading......