PSOOO M16 Laptop Solar Power Bank User Manual

PSOOO M16 Laptop Solar Power Bank

Product Structure

1. USB-A Output
2. Type-C Input/Output
3. USB-B Output
4. Power Indicator
5. LED lights
6. Power Button

Power Bank Parameter

• Battery Cell Type: read the instructions carefully
• Input (Type-C),SV/3A, 9V/3A, 12V/3A, ISV/3A,20V/3.25A(65WMAX)
• Output (Type-C), 5V / 3A, 9V / 3A, 12V / 3A, 15V / 3A, 20V / 3.25A (65W MAX)
• Output (USB-A): SV / 3A, 9V / 2A, 12V / l.SA
• Output (USB-B): SV / 3A, 9V / 2A, 12V / l.SA
• Working Temperature: 20°c ~ 40°C

Instructions for use

1. Power Button Function:
   (01) Short press button once displays device power remaining
   Four LED power indicators show the power status respectively as below:

2. Charge this power bank through power adapter:
   The power bank has Type-C port which support PD 65W, connect the cell phone adapter by fast charging Type-C cable, you can charge the power bank, the LED indicator flash during charging process four LED lights keep ON after full charged. Note : If the leakage phenomenon occurs during working, please stop using it immediately.

3. Charge for cell phone, tablet, notebook and other digital products: {01) USB/USB-C output for digital devices
   This power bank has 2 USB and 1 Type-C output port. Connect any output port to the digital product, it will charge, power bank’s LED indicator OFF after full charge the digital product, power supply auto disconnected. The Type-C max output power is PD 65W, can charge for MacBook. Note : When the battery power is too low, power indicator flash for a warning, it can’t provide any output at this moment.

4. How to check notebook voltage
   Check the parameter on the notebook power adapter, find the output voltage and current.
   For example , 20V = 3A
   Power calculation formula: voltage 20V * current3.2SA = power 65W

5. Indicator light
   The full power display is 4 cells, one cell represents 25 percent of the power. The green light will be on when the input and output is on, which means fast charging.

6. How to operate the lights
   Quickly press the switch button twice to turn on the light mode, click the power button again to enter the flashing mode, and double-click the switch button to turn off the light.

Notifications

• Full charge the product for the first time use;
• When charging the power bank, be sure to use the correct cable and adapter,or the power bank may be damaged;
• Before charge your device. please confirm the device input voltage complies with the power bank output voltage or not;
• Keep this power bank out the access of kids, avoid incorrect operation;
• Don’t use this product for long time, disconnect the charging cable to storage;
• To avoid shortening the lifespan, please full charge and discharge the power bank at least every 4 months;
• This product has a built-in over-temperature protection function, over temperature protection may occur when the environment temperature exceeds the normal use temperature, just put the product in the normal temperature environment, short press the button to recover the output;
• Please dispose the scrapped products according to local laws. Do not treat the battery as household waste, to avoid explosion and pollution;
• If you find the power bank has some hidden danger or other problems, stop use it at once.

Safety Warning

• Don’t disassemble the shell of the product without permission, to avoid the battery cell damaged or other danger;
• Don’t disassemble, crush, puncture, short the product, or put it into water, fire or exposed to over 60°C environment, to avoid fire hazards,
• Don’t expose the product under the sun or place it close to heat and flammable place, or leave it in the car. The high temperature caused by strong sunlight will damage the product;
• Don’t put any debris into the USB, input/output port, to avoid short circuit or damage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>