CHIEF AS3LD Video Soundbar Mount Installation Guide

CHIEF AS3LD Video Soundbar Mount

Product Information

Specifications

• Product Name: AS3LD Video Soundbar Mount
• Weight Capacity : 15 lbs (6.8 kg) with L-brackets, 20 lbs (9 kg) when installing directly to soundbar bracket
• Max Height : 22.96 inches (583.1 mm)
• Tools Required : 1/4, 3/8, 3/16 (included)

Product Usage Instructions

Important Safety Instructions

• WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment. Ensure the combined weight of all components does not exceed the specified limits.
• CAUTION: Follow all instructions to prevent damage or destruction of equipment.
• WARNING: Provide adequate structural strength to support the weight of equipment. Reinforce the structure if necessary before installation.
• WARNING: Use the mounting system only as intended. Do not use attachments not recommended by the manufacturer.
• WARNING: Do not operate the mounting system if damaged. Return it for examination and repair.

Dimensions
The maximum height of the AS3A101 is 22.96 inches (583.1 mm).

Tools Required for Installation
Ensure you have the following tools for installation:

• 1/4 wrench
• 3/8 wrench
• 3/16 screwdriver (included)

Parts

• (1) Height-adjustable bracket
• (2) Speaker adapter
• (1) Adapter bracket
• (2) 1/4-20 x 1/4 screws
• (2) #10-24 screws
• (1) 1/4 wrench
• (2) #10-24 x 1/4 screws
• (2) 1/4-20 x 3/8 screws
• (1) 3/16 screwdriver (4.5-inch length)

Assembly and Installation

1. If installing to displays larger than 65 inches, disassemble and reassemble the height-adjustable bracket for longer length.
2. Proceed with Step 3 for smaller displays.

Frequently Asked Questions (FAQ)

• What is the weight capacity of the AS3LD Video Soundbar Mount?
  The weight capacity is 15 lbs (6.8 kg) with L-brackets and 20 lbs (9 kg) when installing directly to the soundbar bracket.

• Can I use attachments not recommended by the manufacturer?
  It is advised not to use attachments not recommended by the manufacturer to ensure safe usage of the product.

• What should I do if the mounting system is damaged?
  Do not operate the mounting system if it is damaged. Return it to a service center for examination and repair.

DISCLAIMER

Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual accurate and complete. However, Legrand | AV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand | AV makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand | AV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM
A MOUNTING SYSTEM is the primary Chief product to which an accessory and/or component is attached.

ACCESSORY
AN ACCESSORY is the secondary Chief product which is attached to a primary Chief product, and may have a component attached or setting on it.

COMPONENT
A COMPONENT is an audiovisual item designed to be attached or resting on an accessory or mounting system such as a video camera, CPU, screen, display, projector, etc.

• WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
• CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

• WARNING: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty! It is the installer’s responsibility to make sure all accessories are properly assembled and installed using the instructions provided.
• WARNING: Failure to provide adequate structural strength for this accessory can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the structure to which this accessory is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the mounting system.
• WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached to the AS3A101 accessory does not exceed 15 lbs (6.8 kg) if using L-brackets or 20 lbs (9 kg) if installing directly to soundbar bracket. (See figure below for details)

• WARNING: Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
• WARNING: Never operate this mounting system if it is damaged. Return the mounting system to a service center for examination and repair.
• IMPORTANT ! : The AS3A101 accessory is designed to be mounted to a Chief® AS3LD mounting system.

DIMENSIONS

LEGEND

• Tighten Fastener

• Loosen Fastener

• Phillips Screwdriver

• Open-Ended Wrench

• By Hand

• Hex-Head Wrench

• Pencil Mark

• Drill Hole

• Adjust

• Remove

• Optional

• Security Wrench

TOOLS REQUIRED FOR INSTALLATION

PARTS

Assembly And Installation

IMPORTANT ! : If installing to displays larger than 65″, height- adjustable bracket (A) will need to be disassembled and reassembled in order to achieve a longer length. For smaller displays, proceed to Step 3.

1. (Displays 65″ and larger ONLY) Remove height-adjustment knobs from height-adjustable bracket (A). (See Figure 1)

2. (Displays 65″ and larger ONLY) Rotate extension bracket 180° and re-install height-adjustment knobs to secure brackets in new orientation. (See Figure 2)

3. Loosen two strut nuts on back of height-adjustable bracket (A) and rotate until they are in a horizontal position. (See Figure 3)

4. Install height-adjustable bracket (A) onto AS3LD mount at desired mounting position. (See Figure 4)
   NOTE: AS3A101 shelf can be installed above or below display.

5. Rotate strut nuts until they are back in a vertical position and tighten button head cap screws. (See Figure 5)

   • NOTE: If speaker adapters (B) are not needed, proceed to Step 7.
   • NOTE: Speaker adapters (B) may be installed in either direction using either upper or lower screw hole.

6. Use two #10-24 x 1/4″ flat head cap screws (F) and two #10- 24 flange hex nuts (E) to secure two speaker adapters (B) to adapter bracket (C). (See Figure 6)

NOTE: Adapter bracket (C) can be installed in either orientation.

7. Loosely install two 1/4-20 x 1/4″ button head cap screws (D) into top holes on height-adjustable bracket (A). (See Figure 7) or (See Figure 8)
8. Install adapter bracket (C) onto screws installed in Step 1 and slide back into the narrow part of the keyhole. (See Figure 7) or (See Figure 8)
9. Tighten screws (D) to secure adapter bracket (C). (See Figure 7) or (See Figure 8)

Soundbar Installation
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached to the AS3A101 accessory does not exceed 15 lbs (6.8 kg) if using L-brackets or 20 lbs (9 kg) if installing directly to soundbar bracket. (See figure on page 2 for details
Use soundbar hardware to install sound bar to adapter bracket (C) or speaker adapters (B).

ABOUT COMPANY

• USA/International
  • A 6436 City West Parkway, Eden Prairie, MN 55344
  • P 800.582.6480 / 952.225.6000
  • F 877.894.6918 / 952.894.6918
• Europe
  • A Franklinstraat 14, 6003 DK Weert, Netherlands
  • P +31 (0) 495 580 852
  • F +31 (0) 495 580 845
• Asia Pacific
  • A Office No. 918 on 9/F, Shatin Galleria
  • 18-24 Shan Mei Street
  • Fotan, Shatin, Hong Kong
  • P 852 2145 4099
  • F 852 2145 4477
• 8800-003397 Rev00
• 2023 Legrand | AV
• www.legrandav.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>