Gsou M1 Portable Wireless Party Speaker User Manual

Portable Wireless
PARTY SPEAKER
M1
User’s manual

Contain

Introduction

1. Button: Short press previous track.

2. Button: Short press Pause/lay. Long press disconnect current bluetooth.

3. REC Button; Long press to play the recording file in the U disk/ TF mode.
   Short press to record in the U disk/ TF Gard mode with the microphone inserted.

4. Button: Short press to play next track.

5. M/Light Button: Short press to switch mode. long press Tum on/Off Dazzle lamp.

6. Button: After inserting the microphone, long press to switch reverberation depth(ECO1 ECO2 EC03).
   In the mode of U disk I TF Card, short press to switch single cycle / play in sequence.

7. Volume button: select volume increase clockwise/volume decrease anticlockwise.

8. Aux Interface: Connect the aux cable to the speaker, and connect the other end to the external sound source.

9. TF Card slot: Insert TF Card to play music.

10. Power switch: Power ON/OFF.

11. Wired microphone port: insert the microphone with 6.35 “connector to use the microphone.

12. Charging indicator light:
    The red light is always on when charging, and the red light is off when fully charged.

13. USB charging port:
    Connect the USB cable, and connect the charger or computer USB port to charge the speaker.

14. U disk interface: insert U disk to play songs in U disk.

15. LED display: it can display the status /mode of the speaker

Functions

BLUETOOTH

1. Turn the power switch 10 to the left and turn it on. If the speaker is not plugged into the TF Card /USB / aux cable, the speaker will automatically enter Bluetooth mode, the display shows· bLUE “.

2. If the speaker has one of the TF Card/ USB flash disk/ aux lines, you need to short press to switch to the display screen 16 “bLUE” Bluetooth mode is displayed, Bluetooth to be connected status is displayed, the “bLUE” flashes, and the “bLUE” indicator light is always on if the connection is successful.

3. Turn on the Bluetooth of the mobile phone to search for pairing. A successful pairing tone will indicate that pairing is successful. Turn on the mobile phone tone, Music player plays music wirelessly.

4. Short press to play / pause; when pausing, the play / pause symbol on the display 15 flashes;
   when playing, the play / pause symbol on the display 15 is always on; long press to disconnect the current connection, and then pair again.

5. short press button to switch to other modes.

AUX

1. After power on, insert the AUX cable to automatically switch to AUX mode (after plug priority), and “AUX” will be displayed on the display.
2. If the AUX line is inserted in the Power OFF slate (without U disk / TFCard), it will automatically enter the AUX mode when power on.
3. If AUX cable(or U disk/TF Card) are inserted in when Power OFF state, short press the button again can switch to AUX mode.
4. short press Bunton to switch other modes.

USB MODE

Maximum U-disk capacity supported: 32G Supported song formats: MP’3 WMA WAV FLAC APE.

1. Insert the U-disk after power on, the speaker will automatically detect and enter the U-disk mode (plug-in priority), and “USB/ TF” will be displayed.
2. If the U disk is inserted in the Power OFF state (no TF card is inserted), the speaker wil automatically enter the U disk mode after power on.
3. If the U disk is inserted in the Power OFF state (with the TF card inserted), press key again to switch to the u Disk mode.
4. short press to switch to other modes.
5. Short press to play/pause; when pause, the play/pause symbol on the display 15flashes; when playing, the play / pause symbol on the display15is always on.

TF CARD MODE

Maximum TF card capacity supported: 32G
Supported song formats: MP3 WMA WAV FLAC APE.

1. Insert the TF card after power on, the speaker will automatically detect and enter the U-disk mode (plug-in priority), and “USB / TF” will be displayed.
2. If the TF card is inserted in the power OFF state, it will enter TF mode automatically after power on.
3. short press to switch to other modes.
4. Short press to play / pause; when pause, the play / pause symbol on the display 15flashes; when play, the play / pause symbol on the display 15is always on.

Specifications

Notice :IPX6, this speaker is fly water resistant and dust proof. Do not soak it under water.

Other

• Mode switching sequence
  TF-AUX-FM-Bluetooth-U disk-TF (cycle)

Notice :
After power on, the mode priority of the speaker is: TF Card U disk -AUX – Bluetooth, if not inserted, skip current mode and enter the next mode automatically;

• Low voltage state
  Low voltage indication: battery voltage < 3.4V, battery symbol flashes on display 15.

• Charging state
  When charging, the indicator light 12is on, and the indicator light goes out when the battery is full

• Reset after crash
  Turn the power switch 10 to the right to turn off, and then turn the power switch 10 to the left to turn on;

• Volume memory
  Set the playback volume of the speaker and turn it off. The volume of the speaker will be memorized next time it is turned on, the same as last time.

Remote Control

| Short press ON/OFF(Turn the power switch to the left and turn it on.)
---|---
| Short press to switch mode.
| Short press Mute/Un-mute
| Short press previous track
| Short press next track
| Short press Pause/Play. Long press disconnect current BT.
| After inserting the microphone, long press to switch reverberation, depth (EC01 EC02 ECO03). In the mode of U disk / TF Card, short press to switch single cycle / play in sequence.
| In U disk / TF card mode and the microphone is inserted, short press| recording / short press again to cancel recording; Long press to play recording file / long press again to cancel playing in U disk / TF mode.
| Short press volume +
| Short press volume –
| Short press turn ON/OFF Dazzle lamp.
---|---
| Speaker in U disk and TF mode, short press to play the corresponding song in U disk / TF card.
It supports a combination of up to two digits (From 1- 99)

Notice :

1. When using the remote control, the remote control needs to face the front of the speaker as far as possible (speaker direction); The distance from the speaker should not exceed 6m ( 236 inch).

2. For the first time using the remote control, you need to pull out the transparent insulating strip at the bottom. Otherwise, the remote control will not works.

3. The songs are sorted according to the chronological order of copying the songs to the U disk/ TF card.

4. Where the microphone picks up sound

5. Short press to switch the voice change type; Long press to restore default (real human voice).

6. Short press Volume +

7. Short press volume –

8. Long press ON/OFF

9. Indicator light:
   The white light flashes when the device is tumed on, and stays on when the speaker is connected;
   The red light is always on when charging, and flashes when the voltage is low;

10. Type-C charging port

Connect:

1. Press and hold the button to turn on the phone, the indicator light will flash white;
2. After turning on M1, the microphone will automatically connect to M1. After the connection is successful, the microphone indicator light will be solid white, and you can use the microphone normally.

Warranty Policy

Your speaker is covered by a limited warranty. It is backed by 1 year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase, This warranty entitles the purchaser to get the product repaired or replaced under the following conditions:

• The warranty applies to the original purchase, Proof of original purchase is required.
• The warranty does not cover the damage caused by misuse, abuse or improper storage.
• In no event shall be responsible for any direct, incidental, consequential or other damages of any kind.

Notice :
The company reserves the right to the product modification for appearance and function, which is subject to change without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>