Gsou Technology CF10 Bluetooth Speaker User Manual

CF10
BLUETOOTH SPEAKERPHONE
User Manual

Thanks for purchasing the CF10 Bluetooth Speakerphone.
Please take the time to follow the instructions in this user manual carefully.

STANDARD ACCESSORIES

STRUCTURE INTRODUCTION

1. Short press to answer when a call comes in Short press again to hang up Long press to reject
2. Short press to pause/play
Double click next song
Three hits the previous song
3. TYPE-C Jack
4. Charging indicator| 5. Mic x 2
6. Mute button (touch)
7. Status indicator
8. Bluetooth pairing key
9. On/off function key
10. Volume-
11. Volume+
---|---

ON/OFF

Long press the buttons for more than 2 seconds to turn on the phone, the status indicator lights up.
Long press the buttons again for more than 2 seconds to shut down, the status indicator goes out.
Automatic shut-down
In the Bluetooth standby state (no device is connected) or the Bluetooth connection is not playing, It will automatically shut down after 5 minutes.

BLUETOOTH MODE

New device pairing:

•  Long press the buttons to turn on, automatically enter the pairing mode, the status indicator flashes blue quickly.
• Turn on the Bluetooth of the device to be paired, search and pair “CF10”
• After the pairing is successful, the status indicator will be steady blue.

Paired devices connect back:

• Long press the buttons to turn on, the status indicator flashes blue slowly and enters the Bluetooth connection state.
• Turn on the Bluetooth of the device that has been successfully paired before, CF10 will automatically pair back to connect.
• After the connection is successful, the status indicator light will be steady blue.

Note: Long press the M button to disconnect the current Bluetooth connection and re-enter the Bluetooth pairing mode; Short press M to enter back connection mode.

USB SOUND CARD MODE

• After power on, connect the speaker interface to the USB 2.0 interface of the computer with a TYPE-C data cable;
• Short press the button to switch the USB sound card mode;
• A white light in the middle of the status indicator light is on;
• Volume increase: long/short press the button, the white status indicator will increase and light up in turn. NI white lights are on when the volume is at maximum;
• Volume reduction: long/short press the button, the status indicator white light will turn off in turn, When the volume is minimum, the white light is all off;
• Touch the key once to turn off the microphone, and the status indicator will be red and on;

CALL MODE

Aim the microphone direction to get a better to call effect.

• When a call comes in Bluetooth mode, a beep will sound and the status indicator will flash green;
• Short press the button to answer, the status indicator is steady green, short press the button again Hang up the current call.
• Touch the key once to turn off the microphone, and the status indicator will be red and on;
• Long press the button to reject

OTHER

• Factory reset Press and hold the 4) key + 40) key at the same time for 2 seconds, the status indicator lights  red/blue/green/white in turn, Indicates that the factory reset is completed;
• Low voltage state Low voltage indication: battery voltage <3.4V, the status indicator flashes slowly in red;
• Charging the charging state, the charging indicator light will be steady red; The indicator light goes out when the battery is fully charged;

SPECIFICATIONS

Bluetooth

Mic

Speaker

Power

Other

IPXS: No harm for 3-5 minutes water flushing, but don’t soak)

LIMITED WARRANTY

Your CF10 Bluetooth speakerphone is covered by a limited warranty. It is backed by a 1-year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced under the following conditions:

• The warranty applies to the original purchaser, Proof of original purchase is required
• The warranty does not cover the damage caused by misuse, abuse or improper storage.
• In no event shall be responsible for any direct, incidental, consequential or other damages of any kind.

WARNINGS AND CAUTIONS

1. To reduce the risk of fire or electric shock, be sure the electric circuits are not overloaded.
2. To reduce the risk of electric shock, be sure not to plug the adapter with wet hands.
3. Unplug the power cable if your device is smoking or abnormal and seek professional help from your nearest service center, be sure not to detach the device yourself.
4. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Liquids can cause a failure and/or a fire hazard.
5. In order to prevent a short circuit, the power cable and audio cable should not be twisted or dragged in case of a short circuit.
6. Do not place the speaker near any open flame sources, such as lighted candles.
7. The safety temperature of the Lithium Battery should not exceed 80°C. 8. Please avoid strong shock and vibration to the screen, do not put pressure on the display surface.

FCC WARNINGS

This device corn plies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

FCC RF warning statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>