Gsou M1-S Portable Wireless Party Speaker User Manual

Gsou M1-S Portable Wireless Party Speaker

USER MANUAL

Portable Wireless Speker M1

Product Specifications

• Model: M1
• Wireless Microphones: 2 included
• Charging: Micro USB Cable and Type-C Cable included
• Supported Formats: MP3, WMA, WAV, FLAC, APE
• U-disk Capacity Support: Up to 32GB

Contain

Introduction

1. Button : Short press previous track.
2.  Button : Short press Pause/Play.Long press disconnect current bluetooth.
3. REC Button: Short press to record in the U disk / TF Card mode with the microphone connected.
Long press to play the recording file in the U disk / TF mode.
4.  Button: Short press to play next track.
5. M/Light Button: Short press to switch mode. Long press Turn on/Off Dazzle lamp.
6.  Button:
After inserting the microphone,long press to switch reverberation depth(ECO1 EC02 EC03).
In the mode of U disk / TF Card, short press to switch single cycle / play in sequence.
7. Volume button: select volume increase clockwise/volume decrease anticlockwise.
8. Aux interface:
Connect the aux cable to the speaker, and connect the other end to the external sound source.
9. TF Card slot: Insert TF Card to play music.
10. Power switch: Power ON/OFF.
11. Wired microphone port: insert the microphone with 6.35 “connector to use the microphone.
12. Charging indicator light:
The red light is always on when charging, and the red light is off when fully charged.
13. USB charging port:
Connect the USB cable, and connect the charger or computer USB port to charge the speaker.
14. U disk interface: insert U disk to play songs in U disk.
15. LED display: it can display the status / mode of the speaker.

Functions

BLUETOOTH

1. Turn the power switch to the left and turn it on. If the speaker is not plugged into the TF Card / USB / aux cable , the speaker will automatically enter Bluetooth mode, the display shows “ bLUE ”.
2. If the speaker has one of the TF Card / USB flash disk / aux lines, you need to short press
to switch to the display screen “bLUE” Bluetooth mode is displayed, Bluetooth to be connected status is displayed,the “blUE” flashes, and the “blUE” indicator light is always on if the connection is successful.
3. Turn on the Bluetooth of the mobile phone to search for pairing. A successful pairing tone will indicate that pairing is successful. Turn on the mobile phone tone,Music player plays music wirelessly.

4. Short press to play / pause ; when pausing, the play / pause symbol on the display (15) flashes;
when playing, the play / pause symbol on the display is always on; long press to disconnect the current connection, and then pair again.
5. Short press button to switch to other modes.

AUX

1. After power on, insert the AUX cable to automatically switch to AUX mode (after plug priority), and “ AUX ” will be displayed on the display.
2. If the AUX line is inserted in the Power OFF state (without U disk / TFCard ), it will automatically enter the AUX mode when power on.
3. If AUX cable(or U disk/TF Card ) are inserted in when Power OFF state, short press the button again can switch to AUX mode.

4. Short press M/Light Button to switch other modes.

FM RADIO

Default search frequency:87.5-108MHZ

1. Power on, short press M/Light button to switch FM mode,the FM frequency will be displayed.

2. Long press enter into auto searching,after the station search is completed, the station will be saved automatically.

3. Short press button Play/Pause.
4. Short press button to play next station.
5. Short press button to play previous station.

USB MODE

Maximum U-disk capacity supported: 32G
Supported song formats: MP3 WMA WAV FLAC APE .

1. Insert the U-disk after power on, the speaker will automatically detect and enter the U-disk mode (plug-in priority), and “USB / TF” will be displayed.
2. If the U disk is inserted in the Power OFF state (no TF card is inserted), the speaker will automatically enter the U disk mode after power on.
3. If the U disk is inserted in the Power OFF state (with the TF card inserted), press M/Light the key again to switch to the U disk mode.
4. Short press M/Light to switch to other modes.
5. Short press  to play/pause; when pause, the play/pause symbol on the display flashes; when playing, the play / pause symbol on the display is always on.

TF CARD MODE

Maximum TF card capacity supported: 32G

Supported song formats: MP3 WMA WAV FLAC APE.

1. Insert the TF card after power on, the speaker will automatically detect and enter the U-disk mode (plug-in priority), and “USB / TF” will be displayed.
2. If the TF card is inserted in the power OFF state, it will enter TF mode automatically after power on.

3. Short press M/Light to switch to other modes.
4. Short press M/Light to play / pause; when pause, the play / pause symbol on the display flashes; when play, the play / pause symbol on the display is always on.

Specifications

Notice: IPX6, this speaker is fully water resistant and dust proof. Do not soak it under water.

Other

Mode switching sequence

TF-AUX-FM-Bluetooth-U disk-TF (cycle)

Notice:

After power on, the mode priority of the speaker is: TF Card – U disk -AUX – Bluetooth, if not inserted, skip the current mode and enter the next mode automatically;

Low voltage state

Low voltage indication: battery voltage < 3.4V, battery symbol flashes on display (15).

Charging state

When charging, the indicator light (12) is on, and the indicator light goes out when the battery is full.

Reset after crash

Turn the power switch (10) to the right to turn off, and then turn the power switch (10) to the left to turn on;

Volume memory

Set the playback volume of the speaker and turn it off. The volume of the speaker will be memorized next time it is turned on, the same as last time.

Remote Control

Light: Short press turn ON/OFF Dazzle lamp.

0-9: Speaker in U disk and TF mode, short press to play the corresponding song in U disk / TF card.
It supports a combination of up to two digits (From 1~ 99)

Notice:
1. When using the remote control, the remote control needs to face the front of the speaker as far as possible (speaker direction); The distance from the speaker should not exceed 6m ( 236 inch).
2. For the first time using the remote control, you need to pull out the transparent insulating strip at the bottom. Otherwise, the remote control will not works.
3. The songs are sorted according to the chronological order of copying the songs to the U disk / TF card.

Wireless microphone

1. Where the microphone picks up sound
2. Short press to switch the voice change type; Long press to restore default (real human voice).

3. Short press Volume +

4. Short press volume –

5. Long press ON/OFF

6. Indicator light:
The white light flashes when the device is turned on, and stays on when the speaker is connected; The red light is always on when charging, and flashes when the voltage is low;

7. Type-C charging port

Connect:

1. Press and hold the button to turn on the phone, the indicator light will flash white;

2. After turning on M1 , the microphone will automatically connect to M1. After the connection is successful, the microphone indicator light will be solid white, and you can use the microphone normally.

Wired Microphone Instruction

1. Please power on M1 and insert the wired microphone into the M1 slot, and then power on the microphone. After that, the “MIC” wording appears in the M1 screen display.
2. If the wired microphone is inserted while M1 in power off status, there is no any working function for the microphone. You will need to re-insert the microphone.

Warranty Policy

Your speaker is covered by a limited warranty. It is backed by 1 year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced under the following conditions:

• The warranty applies to the original purchase, Proof of original purchase is required.
• The warranty does not cover the damage caused by misuse, abuse or improper storage.
• In no event shall be responsible for any direct, incidental, consequential or other damages of any kind.

Notice:
The company reserves the right to the product modification for appearance and function,which is subject to change without prior notice.

Frequently Asked Questions (FAQ)

Q: How do I switch between different modes on the speaker?

A: Use the designated buttons for each mode – Bluetooth, AUX, FM Radio, and USB Mode. Short press the corresponding button to switch between modes.

Q: What is the maximum capacity supported for U-disk on the speaker?

A: The speaker supports U-disk capacities up to 32GB.

Q: How do I know if the speaker is fully charged?

A: The charging indicator light will be red when charging and turn off when fully charged.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>