THETFORD B0BV14CLLH Toilets Twusch Installation Guide

May 15, 2024
THETFORD

THETFORD logo INSTRUCTION TWUSCH INSTALLATIONTHETFORD B0BV14CLLH Toilets
Twusch

B0BV14CLLH Toilets Twusch

Installing Twusch with Twusch installation set. This includes high performance special sealant, cleaner and stick. Make sure the Twusch inlay is the correct one for your Thetford Cassette toilet. Read the enclosed safety information leaflet before working with the provided installation products.
The installation of your Twusch is the same for all cassette toilets; therefore, only this cassette toilet is depicted.
Installation disclaimer
Thetford explicitly rejects any liability and accountability for damage or injuries directly or indirectly resulting from repair, installation, maintenance or troubleshooting performed by any parties other than our designated service partners, dealers or OEMs. Furthermore, Thetford reserves the right to take the necessary legal measures if such use, repair, maintenance, installation and troubleshooting leads to any direct or indirect damage to Thetford.
Removing Twusch may affect product performance, and its original functionality cannot be guaranteed afterward. Consequences are at the user’s discretion, and complete reinstatement of the original product’s performance is not assured. Consider carefully before proceeding with Twusch removal.
OTTOSEAL S100 information

  • Skin-forming time at 23 °C/50 % RH [minutes] ~ 10
  • Curing in 24 hours at 23 °C/50 % RH [mm] ~ 2-3
  • Processing temperature from/to [°C] + 5 / + 35
  • Viscosity at 23 °C pasty, stable
  • Density at 23 °C according to ISO 1183-1 [g/cm³] ~ 1,0
  • Shore-A-hardness according to ISO 868 ~ 20
  • Ventilate well during curing
  1. Take out the waste holding tank
  2. Clean the surfaces of the toilet bowl and Twusch inlay
  3. Apply a sealant layer in the toilet bowl
  4. Insert the Twusch inlay into the toilet bowlTHETFORD B0BV14CLLH Toilets Twusch
  5. Push the Twusch inlay into the toilet bowl
  6. Seal the top edge between the Twusch inlay and the toilet bowl with sealant
  7. Remove excess sealant
  8. Leave to cure for a minimum of 24h

THETFORD B0BV14CLLH Toilets Twusch - Fig 1Read the enclosed safety information leaflet before working with the provided installation products

Thetford B.V.
Nijverheidsweg 29
4879 AP Etten-Leur
The Netherlands
T. +31 76 504 2200
E. info@thetford.eu
www.thetford.com
Thetford Ltd.
Unit 6, Brookfields Way
Manvers, Rotherham
S635DL England
United Kingdom
T. +44 1709766750
infogb@thetford.eu
Copyright 2023-2023 Thetford B.V. All rights reserved.
thetford.com
More video instructions on YouTubeTHETFORD B0BV14CLLH Toilets Twusch - QR
Codehttp://go.thetford.com/Thetford-Twusch

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals