ANKER A25M0 MagGo Wireless Charger 15W Pad User Manual

: May 15, 2024
: Anker

Table of Contents

ANKER A25M0 MagGo Wireless Charger 15W Pad
Product Information
Product Usage Instructions
Important Safety Instructions
FCC
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER A25M0 MagGo Wireless Charger 15W Pad

Product Information

Specifications:
- Product Name: Anker MagGo Wireless Charger (15W, Pad)
- Output Power: 15W
- Manufacturer: Anker Innovations Limited
- Country of Origin: Multiple locations (Hong Kong, Germany, United Kingdom)

The Anker MagGo Wireless Charger is designed to provide convenient and efficient wireless charging for your devices. With a power output of 15W, it offers fast and reliable charging performance. The charger complies with various safety standards and regulations to ensure user safety and product quality.

Product Usage Instructions

Safety Instructions:
- Before using the Anker MagGo Wireless Charger, please read and adhere to the following safety instructions:
- Refer to the electrical and safety information provided on the product.
- Ensure a minimum separation distance of 20cm between the charger and your body.
- Avoid making any changes or modifications to the charger that are not approved by the manufacturer.
Installation:
- To use the Anker MagGo Wireless Charger:
- Place the charger on a flat surface.
- Connect the charger to a power source using the provided cable.
- Ensure your device is compatible with wireless charging technology.
Charging Your Device:
- To charge your device wirelessly:
- Ensure the charger is plugged in and powered on.
- Place your device on the charging pad of the Anker MagGo Wireless Charger.
- Wait for the device to start charging automatically.
FAQ:
- Q: How do I know if my device is compatible with the Anker MagGo Wireless Charger?
- A: Most modern smartphones and devices that support Qi wireless charging are compatible with the Anker MagGo Wireless Charger. You can check your device’s specifications or user manual to confirm compatibility.
- Q: Can I use my device while it is wirelessly charging on the Anker MagGo Wireless Charger?
- A: Yes, you can use your device normally while it is charging on the wireless charger. However, it is recommended not to place any metal objects between your device and the charging pad to avoid interference with charging.

Important Safety Instructions

This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
Wireless charging products make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.
High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.
Please refer to the electrical and safety information on the bottom before installing or operating the product.
The maximum ambient temperature during use of this product must not exceed 40°C.

FCC

FCC Warning

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
The following importer is the responsible party (for FCC matters only).
- Company Name: Fantasia Trading LLC
- Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone: +1 800 988 7973

IC Warning Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF exposure statement:

This equipment complies with IC Radiation exposure limits set forth for anuncontrolled environment.
This equipment should be installed and operated with a maximum distance of 10cm between the product and your body.
This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product complies with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: support.anker.com.
To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product complies with Directives 2014/53/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: support.anker.com.
To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited,
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Indoor use only
This symbol indicates that this product shall not be treated as household waste.
Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
TX/RX Frequency Range: 110-148kHz(Only for EU and UK)
Radiated H-Field: 25.59dBuA/m(@10m)(Only for EU and UK)