GOODWAY CC-400HF Condenser Cleaner User Guide
- May 15, 2024
- goodway
Table of Contents
GOODWAY CC-400HF Condenser Cleaner
Product Information
Specifications:
- Model: CC-400HF
- Usage: HVAC & Facility Maintenance
- Power Source: Electric
- Pressure: High-pressure
- Accessories: Spray gun, high-pressure hose, water supply hose, various nozzles
Product Usage Instructions
Proper Startup Essentials:
- Replace the red cap with the black cap.
- Attach the high-pressure hose to the quick connection on the output of the pump.
- Attach the spray gun to the quick connect of the high-pressure hose.
- Attach the water supply hose to the water inlet on the output of the pump and turn the water on.
- Plug the 3-prong GCFI plug into an outlet and press reset to ensure its functioning.
- Pull the trigger of the gun to allow the water to flow.
- While holding the trigger, turn on the machine and allow it to run water for 20-30 seconds. (Note: do not attach any of the additional nozzles to the gun during this step).
- Let go of the trigger and put the soap dip tube into your container of COILSHINE Chemical.
- Attach either the black nozzle or wonder wand to the spray gun’s quick connection to the siphon and apply soap.
- Attach the yellow nozzle to the spray gun’s quick connect to rinse. (Note: You can use the wonderland to rinse but you must remove the dip tube from the COILSHINE chemical).
FAQ
-
Q: What should I do if the machine does not start?
A: Check that all connections are secure and, the power source is functioning, and reset the GCFI plug. -
Q: Can I use other cleaning solutions besides COILSHINE Chemical?
A: It is recommended to use COILSHINE Chemical for optimal performance and maintenance of the product. -
Q: How often should I clean or replace the nozzles?
A: Regularly inspect and clean the nozzles after each use. Replace them if there are signs of wear or blockage.
PLEASE REVIEW IMPORTANT SAFETY INSTRUCTIONS LOCATED IN OPERATORS MANUAL
Proper Startup Essentials
INSTALLATION INSTRUCTION
- Replace the red cap with the black cap
- Attach the high-pressure hose to the quick connection on the output of the pump.
- Attach the spray gun to the quick connect of the high-pressure hose.
- Attach the water supply hose to the water inlet on the output of the pump and turn the water on.
- Plug the 3-prong GCFI plug into an outlet and press reset to ensure its functioning.
- Pull the trigger of the gun to allow the water to flow.
- While holding the trigger, turn on the machine and allow it to run water for 20-30 seconds. (Note: do not attach any of the additional nozzles to the gun during this step).
- Let go of the trigger and put the soap dip tube into your container of COILSHINE Chemical.
- Attach either the black nozzle or wonder wand to the spray gun’s quick connect to the siphon and apply soap.
- Attach the yellow nozzle to the spray gun’s quick connect to rinse.
( Note : You can use the wonder wand to rinse but you must remove the dip tube from the COILSHINE chemical).
HVAC & FACILITY MAINTENANCE SOLUTIONS
GOODWAY® TECHNOLOGIES CORPORATION 420 West Avenue, Stamford, CT 06902 USA
Tel : 203-359-4708
Toll-Free Tel: 800-243-7932
Fax : 203-359-9601
Toll-Free Fax : 800-359-9625
Email : [email protected]
Visit : www.goodway.com