Gulliva Solar Garden Lights Outdoor Waterproof Firefly Light Yard Decorative User Manual
- June 15, 2024
- Gulliva
Table of Contents
Gulliva Solar Garden Lights Outdoor Waterproof Firefly Light Yard
Decorative
Congratulations on your purchase of Gulliva Solar Firefly Lights! This user manual will guide you through the setup, operation, and troubleshooting of your lights. Please read the instructions carefully to ensure optimal performance and enjoyment.
Package Contents
- Four packs of Solar Firefly Lights with 12 LEDs
- User Manual
Important Safety Information
- Read and understand all instructions before using the lights.
- Keep the solar panel clean and free from any obstructions to maximize its efficiency.
- Do not disassemble the light unit or attempt any repairs yourself. Contact customer support for assistance.
- If the product is damaged or not working properly, stop using it and contact customer support.
How Solar Lights Work
During the day, the solar panel converts solar power into energy and charges
the built-in battery. At night, the lights automatically turn on using the
stored energy. The working time of the lights depends on your geographical
location, weather conditions, and the availability of sunlight.
Choosing an Ideal Location
- Select an outdoor location with full, direct sunlight where the solar panel can receive at least 6 hours of sunshine each day.
- Avoid placing the lights in shaded areas as it may affect the battery charging and shorten the working time at night.
- Ensure the selected location is not near strong lighting sources, such as street lights, which may interfere with the automatic functioning of the lights. The lights have a built-in light sensor to control their operation.
- Solar lights are ideal for night lighting in gardens and lawns. You can also place the lights outdoors during the day for charging and bring them inside for illuminating.
Initial Setup
- Remove the Solar Firefly Lights from the packaging.
- Assembling the lights:
- Attach the stake to the light part by aligning the connectors and firmly pushing them together.
- Connect the solar panel part to the light part by aligning the connectors and firmly pushing them together.
- Repeat this process for all four packs of Solar Firefly Lights.
Installation Instructions
- Choose a suitable outdoor location where the solar panel can receive direct sunlight for optimal charging.
- Push the ground stake into the ground, leaving enough height for the light unit.
- Adjust the angle of the solar panel to ensure maximum sun exposure.
- Once installed, switch on the power button located on the underside of the light unit.
Operating Instructions
-
Power On/Off
-
To turn on the lights, switch on the power button located on the underside of the light unit.
-
To turn off the lights, switch off the power button.
-
Working Modes
The Solar Firefly Lights offer different working modes: -
If available, use the mode button to cycle through the available modes, such as steady on and flickering. Release the button when the desired mode is selected.
-
Auto Function
The lights feature an automatic light sensor that turns them on at dusk and off at dawn. In the ON position, the lights will automatically illuminate when it gets dark and turn off when it’s bright enough.
Maintenance and Care
- Regularly clean the solar panel to remove dirt, dust, or debris that may obstruct sunlight absorption. Use a soft, damp cloth for cleaning.
- Ensure that the light unit and the solar panel are free from any blockages or obstructions.
- If the light output diminishes over time, it may indicate that the battery needs replacement. Contact customer support for assistance.
Troubleshooting
If you encounter any issues with the Solar Firefly Lights, try the following troubleshooting steps:
- Lights not turning on
- Ensure that the power switch is turned on.
- Make sure the lights are in a location with sufficient sunlight exposure for charging.
- If the lights have been stored for a long time without use, they may require several days of sunlight exposure to fully charge the battery. Give them more time to charge and try again.
- Dim or weak light output
- Clean the solar panel with a soft, damp cloth to remove any dirt or debris that may be obstructing sunlight absorption.
- Ensure that the solar panel is positioned correctly to receive maximum sunlight exposure throughout the day.
- Check if there are any obstructions, such as overgrown plants or objects, blocking the solar panel’s access to sunlight. Clear any obstructions if present.
- Lights not switching between modes
- If your lights have multiple working modes, make sure you are following the correct steps to switch between modes as outlined in the user manual.
- Try turning off the lights and then turning them back on to reset the mode selection.
- Battery not holding a charge
- If you have been using the lights for an extended period and notice a significant decrease in battery performance, the battery may need replacement. Contact customer support for assistance in obtaining a suitable replacement battery.
If the troubleshooting steps above do not resolve the issue, please contact our customer support for further assistance.
Note: Do not attempt to disassemble or repair the lights yourself, as it
may void the warranty and result in damage to the product.
We hope these instructions and troubleshooting steps help you enjoy the
enchanting illumination of your Solar Firefly Lights.