GOODWAY CTV-1501 Cooling Tower Waterbasin Vacuum User Guide
- June 13, 2024
- goodway
Table of Contents
GOODWAY CTV-1501 Cooling Tower Waterbasin Vacuum
Product Usage Instructions
Please follow the steps below to properly use the CTV-1501:
- Review the important safety instructions located in the operator’s manual.
- Ensure that the outlet hose is connected.
- Close the prime valve.
- Open the inlet valve.
- Close the outlet valve.
- Make sure the power switch is in the OFF position.
- Connect the inlet hose to the water supply.
- Priming the CTV-1501:
- Turn on the water supply.
- Submerge the cleaning tool under the surface of the water in the cooling tower basin.
- Open the prime valve to purge air from the inlet hose.
- Wait until air bubbles stop.
- Go back to the machine and turn on the power switch.
- Partially open the outlet valve.
- Close the prime valve when a full column of water is flowing.
- Begin vacuuming the basin by keeping the cleaning tool under the surface of the water.
- If the unit fails to prime, consult the operating and maintenance manual.
Proper Startup Essentials
GETTING READY
PRIMING THE CTV-1501
- With the water supply turned on, submerge the cleaning tool under the surface of the water in the cooling tower basin.
- Open the prime valve to…
- Purge the air from the inlet hose.
- When the air bubbles stop, go back to the machine and turn the power switch on and partially open the outlet valve.
- Close the prime valve when a full column of water is flowing. Begin vacuuming the basin, keeping the cleaning tool under the surface of the water. If the unit fails to prime consult the Operating and Maintenance Manual.
Contacts
GOODWAY® TECHNOLOGIES CORPORATION
- 420 West Avenue, Stamford, CT 06902 USA
- Tel: 203-359-4708
- Toll-Free Tel: 800-243-7932
- Fax: 203-359-9601
- Toll-Free Fax: 800-359-9625
- Email: goodway@goodway.com
- Visit: www.goodway.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>