HYTRONIK SAM12-TY Dimmable Sensor Module Instruction Manual
- June 5, 2024
- HYTRONIK
Table of Contents
Dimmable Sensor Module with
Mesh
SAM12/TY
Tuya Enabled
Product Description
SAM12/TY is a Bluetooth sensor head only with 12VDC input and 5V 1kHz PWM / 0-10V output, it ‘s ready to be integrated into a third-party LED driver, no control base needed. It is suitable for bulkhead, tri-proof, LED panel, linear, pendant, high-bay. Meanwhile, all commissioning and settings can be done via smart.
Features
Use Tuya smart for commissioning
Grouping luminaires via mesh network
5V 1kHz PWM / 0-10V output
Tri-level dimming control based upon occupancy (also know as corridor
function)
Robust HF antenna design wireless interference
Device firmware update over-the-air
5-year warranty
Free smartphone App for set-up and commissioning
Technical Specifications
Bluetooth Transceiver
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| Max 4dBm
Range (Typical )| 10~30m
Sensor Data
Operation frequency| 5.8 GHz +/- 75MHz
Transmitting power| <0.2mW
Detection range*| Max installation height: 6m
Max detection range (Ø): 12m
Detection angle| 30° ~ 150°
Input & Output Characteristics
Input| 12VDC
Output| 5V 1kHz PWM / 0-10V output
Stand-by power| <0.3W
Environment
Operation temperature| Ta: -20°C ~ +60°C
IP rating| IP20
- The detection range is heavily influenced by sensor placement (angle) and different walking paces.
It may be reduced under certain conditions.
Mechanical Structure & Dimensions
Wiring Diagram
Functions and Features
1 Tri-level Control (Corridor Function)
Hytronik builds this function inside the motion sensor to achieve tri-level control, for some areas which require a light change notice before switch-off. The sensor offers 3 levels of light: 100%–>dimmed light (natural light is insufficient) –>off; and 2 periods of selectable waiting time: full light duration and microlight duration; Selectable daylight threshold and freedom of detection area.
With sufficient natural light, the light does not switch on when presence is detected.
With insufficient natural light, the sensor switches on the light automatically when presence is detected.
After full light duration, the light dims to micro brightness if the surrounding natural light is below the daylight threshold.
Light switches off automatically after the microlight duration elapses.
Highlight
1 Robust HF Sensors Design – Anti-interference Technology
Hytronik’s microwave motion sensor uses 5.8GHz high frequency (HF) antenna in
the product design. With the increasing density of wireless environments such
as 5G GSM tower and 5G Wi-Fi coverage, this has created extra challenges for
sensor’s operation because the air is shared by all kinds of wireless signals,
and transmissions from any device at the similar frequency could potentially
cause interference. The effects of interference which can be noticed by users
are usually false triggering of sensors (turning on/off erratically), or
lights staying on even after hold time etc.
To get around such tough environment, Hytronik has developed a new series of
robust HF modules, designed to be loaded with our own special sophiscated
software algorithms. These robust HF modules can withstand different types of
wireless interferences in the real application. We believe this is the
ultimate solution towards demanding installation environments in the future.
- 5G Router
- Anti-interference
- Hytronik Microwave Sensor (New Robust Antenna)
- 5G GSM tower
- Other types of wireless sources (such as Bluetooth, RF etc.)
2 Grouping luminaires via mesh network
- Grouping the primary tri-proof light with the secondary tri-proof light with APP setting.
- When the primary tri-proof light receives Bluetooth signal, it tranmits to the the secondary tri-proof light so the tri-proof lights switch on at the same time.
*All the settings can be finished on the APP.
Detection Pattern
Ceiling mounted detection pattern (m)
Wall mounted detection pattern (m)
Additional Information / Documents
-
Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation -
Data sheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/Bluetooth 5.0 SIG mesh system ->Partnership -
Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 05 Jul. 2022 Ver. Draft
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>