FONESTAR VULKAN-15T Horn Speaker User Guide
- May 15, 2024
- Fonestar
Table of Contents
FONESTAR VULKAN-15T Horn Speaker
Specifications
- Power: 15W RMS
- Speakers: 1 compression driver
- Response: 320-6,000 Hz (-10 dB)
- Impedance: 15W RMS @ 100V (667Ω), 7.5W RMS @ 100V (1,333Ω)
- Sensitivity: 105 dB @ 1 W/1 m
- Maximum Sound Pressure: 105 dB @ 1 W/1 m
- Coverage Angle: Not specified
- Protections: IP-66 according to EN 60529
- Material: ABS diffuser and back cover
- Connection: 30 cm cable with stripped ends
- Temperature Range: Not specified
- Dimensions: 222 x 162 x 232 mm (depth)
Product Usage Instructions
Installation in Outdoor Environments
- Ensure the speaker is securely mounted in a suitable location.
- Connect the stripped cable ends to the corresponding terminals.
- Check proper power, impedance, and frequency settings according to your setup.
- Adjust the coverage angle as needed for optimal sound dispersion.
Connecting to Power Source
- Use appropriate power specifications (15 W RMS) and impedance levels based on the requirements.
- If using a 100 V line, ensure the speaker is configured accordingly.
- Connect the speaker to a compatible amplifier output with the correct power rating.
Maintenance and Care
- Regularly inspect the speaker for any damage or debris accumulation.
- Clean the speaker using a damp cloth if necessary, avoiding direct water exposure.
- Ensure the speaker remains protected from extreme weather conditions.
Frequently Asked Questions (FAQ):
Q: What is the suitable application for the VULKAN-15T horn speaker?
- A: The VULKAN-15T horn speaker is ideal for public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
Q: What are the key features of the VULKAN-15T speaker?
- A: The speaker is constructed with materials resistant to adverse weather conditions, has IP-66 protection, and can reproduce the frequency range of speech over long distances.
Q: How should I connect the speaker to an amplifier?
- A: Connect the stripped cable ends to the corresponding terminals on the amplifier ensuring proper power and impedance matching.
DESCRIPTION
- The horn speakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances
- Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water.
- Suitable for outdoor and marine environments
- For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
IMPORTANT
- For proper functioning and performance, use appropriate power, impedance and frequency limits.
- Before connecting to other equipment, take into account the necessary conditions for a HIGH IMPEDANCE installation (100 V line). Further information can be found at: fonestar.com/downloads/install_fonestar_en.pdf
CONNECTION EXAMPLES
POWER | **IMPEDANCE** | **COLOR** |
---|---|---|
100 V | 70 V | |
15 W | 7.5 W | 667 Ω |
7.5 W | 3.75 W | 1,333 Ω |
COM: BLACK
- Insulate any unused cables separately.
INSTALLATION
TECHNICAL SPECIFICATIONS
- POWER: 15 W RMS
- SPEAKERS: 1 compression driver
- RESPONSE: 320-6,000 Hz (-10 dB)
- IMPEDANCE: 15 W RMS@100 V (667 Ω) 7.5 W RMS@100 V (1,333 Ω)
- SENSITIVITY: 105 dB@1 W/1 m
- MAXIMUN SOUND
- PRESSURE: 116 dB@full power/1 m
- COVERAGE ANGLE: H/V: 140º/140º@500Hz, 120º/120º@1kHz, 60º/60º@2kHz, 40º/40º@4kHz (-6 dB)
- PROTECTIONS: IP-66 in compliance with EN 60529
- MATERIAL: ABS diffuser and rear cover Aluminium mount A2 stainless steel screws
- CONNECTION: 30 cm cable with stripped ends
- TEMPERATURE RANGE : Operation: -25ºC ~ +55ºC
- Storage: -40ºC ~ +70ºC
- MEDIDAS: 222 x 162 x 232 mm depth
- www.fonestar.com
Documents / Resources
|
FONESTAR VULKAN-15T Horn
Speaker
[pdf] User Guide
VULKAN-15T Horn Speaker, VULKAN-15T, Horn Speaker, Speaker
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>