FONESTAR VULKAN-30T Horn Speaker User Guide
- May 15, 2024
- Fonestar
Table of Contents
FONESTAR VULKAN-30T Horn Speaker
Product Information
Specifications
- Power Output: 30W RMS
- Speaker Type: Horn Speaker
- Frequency Response: 250-7,000 Hz (-10 dB)
- Impedance: 100V
- Sensitivity: 104 dB@1W/1m
- Max Sound Pressure: 104 dB@1 W/1 m
- Coverage Angle: Not specified
- Protection Rating: IP-66
- Material: ABS for diffuser and rear cover
- Connection: Black cable for COM, white and green for + and
- Temperature Range: Not specified
- Dimensions: 285 x 205 x 285 mm
Product Usage Instructions
Set the Speaker
Ensure the speaker is configured correctly based on the power requirements (30 W or 15 W) and impedance settings (333 or 666).
Connect the Cables
Connect the cables ensuring proper polarity with white and green cables for + and -, and the black cable for COM.
Power and Connection
Connect the speaker to an amplifier output with a 100 V line at a minimum of 30 W RMS. Ensure proper power, impedance, and frequency limits are met for optimal performance.
Usage Environment
This horn speaker is suitable for outdoor and marine environments due to its IP-66 protection rating. Ideal for public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
Frequently Asked Questions
Q: What is the power output of the VULKAN-30T horn speaker?
A: The power output is 30 W RMS.
Q: What is the impedance of this horn speaker?
A: The impedance is set at 100 V.
Q: Is the VULKAN-30T suitable for outdoor use?
A: Yes, the horn speaker is specially designed for outdoor and marine environments with IP-66 protection against dust and water ingress.
DESCRIPTION
- The horn speakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances.
- Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water. Suitable for outdoor and marine environments.
- For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
IMPORTANT
For proper functioning and performance, use appropriate power, impedance and
frequency limits.
Before connecting to other equipment, take into account the necessary
conditions for a HIGH IMPEDANCE installation (100 V line). Further information
can be found at:
fonestar.com/downloads/install_fonestar_en.pdf
INSTALLATION EXAMPLES
Insulate any unused cables separately.
INSTALLATION
TECHNICAL SPECIFICATIONS
-
POWER: 30 W RMS
-
SPEAKERS: 1 compression driver
-
RESPONSE: 250-7,000 Hz (-10 dB)
-
IMPEDANCE: 30 W RMS@100 V (333 Ω) 15 W RMS@100 V (666 Ω)
-
SENSITIVITY: 104 dB@1 W/1 m
MAXIMUN SOUND -
PRESSURE: 119 dB@full power/1 m
-
COVERAGE ANGLE: H/V: 120º/120º@500Hz, 90º/90º@1kHz, 50º/50º@2kHz, 40º/40º@4kHz (-6 dB)
-
PROTECTIONS: IP-66 in compliance with EN 60529
-
MATERIAL: ABS diffuser and rear cover Aluminium mount A2 stainless steel screws
-
CONNECTION: 30 cm cable with stripped ends
-
TEMPERATURE RANGE : Operation: -25ºC ~ +55ºC
-
Storage: -40ºC ~ +70ºC
-
MEDIDAS: 285 x 205 x 285 mm depth
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>