Kamoer KLVP3 Micro Diaphragm Pump User Manual
- June 17, 2024
- Kamoer
Table of Contents
Product Manual
Kamoer Fluid Tech(Shanghai) Co., Ltd.
Version:A/4
KLVP3 Micro Diaphragm Pump
| Product name | Micro diaphragm pump |
|---|---|
| Product model | KLVP3 |
Execution date
FileNo.
| 2022.5.16
CPBZ-KLVP3-01
Company name
VersionNo.
| Kamoer Fluid Tech (Shanghai) Co.,Ltd.
A4
Product Overview
1.Product physical picture 2.Product assembly drawing
3.Model definition
| KLVP3 | S | B | 12 |
|---|---|---|---|
| model | pump head type | motor type | Input voltage |
3.1 Pump head type
3.2 Motor type
3.3 Input voltage
12:12 Vvoltage input
24:24 Vvoltage input
4. Performance characteristics, typical applications
- Performance characteristics
- KLVP3 series diaphragm air pumps are available in two voltages of 24V and 12V, and customers can choose the appropriate voltage according to their own usage scenarios
- The appearance of the product is personally checked by the design master, which is beautiful and generous.
- Oil-free, maintenance-free, can work 24 hours a day
- Optional motor, brush motor with cost advantage or brushless motor with performance advantage
- Low noise, low power design
- High-quality engineering plastics and rubber materials, showing good product stability
4.2 Typical applications
- Environmental protection industry: such as used as a gas pump for gas monitoring
- Medical equipment: such as used as an air pump for a rehabilitation instrument
- Industrial automation: such as the use of negative pressure pumps as suction cups
- White goods: such as use as a negative pressure pump for a massager
4.3 Known Risk Notification
- The medium will be in contact with the pump head and the rubber, so it is necessary to check the chemical compatibility or conduct an immersion test when selecting the model
- The working environment of the product should not exceed 40°C, and the humidity should not exceed 70% (no condensation). The harsh working environment will cause premature damage to the product
- Frequent start and stop, overpressure or underpressure and other unreasonable working conditions will lead to premature damage of the pump
- High overloading may result in premature failure of the product
- The medium contains dust, oil and other pollutants that will contaminate the pump components and cause premature damage to the pump (please equip a pre-filter)
5. Product Certification, Intellectual Property
Product specification
1. Technical Parameters
| Project | KLVP3-SB | KLVP3-SBP | KLVP3-DB | KLVP3-SD |
|---|---|---|---|---|
| Basic parameters | Effective traffic | ≥1. 2L/ min | ≥1. 5 L/ min | ≥2. 2 L/ min |
≥1. 2 L/ min
Peak flow| ≥2L / min| ≥2.5L / min| ≥4L / min| ≥2L / min
Negative pressure| ≥- 0.05 Mpa
Positive pressure| ≥ 0.08 MPa
Power| ≤2.5W| ≤4W| ≤5W| ≤2.5W
Noise| ≤62dB| ≤65dB| ≤65dB| ≤65dB
Control method| PWM speed regulation work, fixed speed work| fixed speed work
Weight| about 70g| about 85g| about 105g| about 80g
Rated voltage| 12V/24V
Motor type| DC brushless motor| DC brushed motor
Product life| ≥ 6000h| ≥ 600h
Applicable
environment
| Temperature range: 0℃～50℃; relative humidity: <80% (no condensation)
Supplementary Note| The above parameters are tested under standard atmospheric
pressure, room temperature 25°C, and air medium. Under the ambient noise of
35dB, measured at a distance of 50cm, the performance parameters of the
product are affected by the comprehensive influence of the environmental state
(air pressure, temperature, humidity, etc.), the medium state (temperature,
density, viscosity, and chemical properties, etc.) and the load before and
after the pump, so the above Parameters may differ from actual parameters.
2. Product material
Model| Pump head| Pump body| Diaphragm| Valve|
Eccentric wheel
---|---|---|---|---|---
KLVP3| PPE| PA| EPDM| EPDM| Brass
3. Product Size
4. Flow curve
5. Motor Control (for
brushless motors)
| Red line | Yellow line | Bue line (white line) | Black line |
|---|---|---|---|
| Vcc | FG | PWM | GND |
| Positive electrode | Speed feedback | Speed regulation | Negative electrode |
-
PWM and 0-5V two speed regulation methods, PWM speed regulation: 10KHZ ~ 30KHZ, amplitude:5V
-
Control ratio 0-10% does not turn, 11%-100% speed range.
-
Analog voltage speed regulation: voltage 0-5V, 0-0.5V motor does not rotate, 6-4.5V speed regulation range.
-
The speed feedback of the yellow line is connected to the oscilloscope probe or the host SD/DB series：
1 pulse/rotation speed (rev/min) = FG signal 60
SB /SBP series：6 pulses/rev Speed (rev/min) = FG signal 60/6 -
Full speed operation: connect the positive pole to the red wire and the blue wire (white wire); connect the negative pole to the black wire
-
There are two kinds of speed control cables, blue and white, and the performance is the same.
Optional accessories
| Name | Specifications | Quantity | Function introduction |
|---|---|---|---|
| Prefilter | / | 1 |
the pump head and causing damage to the pump.
Speed control driver board| Three-wire governor| | 1| The water output of the
three-line diaphragm liquid pump and the air output of the diaphragm air pump
can be easily adjusted by the external speed knob.
Add：Building4,No.79 Xiangjing
Road, Songjiang District, Shanghai
Tel：021-67742578
www.kamoer.com
Make it smart to pump fluid
https://www.kamoer.cn/