MORENTO HY4866-WIFI Smart Air Purifier Home Large Rooms Instruction Manual

MORENTO HY4866-WIFI Smart Air Purifier Home Large Rooms

PRINCIPLES OF AIR PURIFICATION
HEPA filter can effectively filter most airborne particulate pollutants larger than 0.3µm in diameter, such as PM2.5, dust particles, pet dander, pollen, cigarette smoke and odor, etc., so as to achieve the purpose of air purification.

AIR PURIFIERS AND ACCESSORIES
Packing List:

• Air Purifier
• HEPA Filter-2
• Power Adapter
• User Manual

Note: The hepa filter is protected with packing bag, unpack the filter before using.

SPECIFICATIONS

Note: Effective for larger rooms but purification will take longer.
Operating Conditions| Temperature: 14°- 104°F /-10°-4Q°C Humidity: 80% RH
Noise Level| 23-55dB
Main material| ABS
Product Dimensions| ** 13.1Sx 7.63 x 17.51 in /33.5 x 19.4 x 44.5 cm
Weight| 7.96 lb / 3.62 kg
Power Adapter| Input: 100-240V 50/60Hz
Output:** 24V/ 2.5A

Various Wind Power

USE YOUR AIR PURIFIER

Note: The power adapter is at the bottom of the air purifier, Make sure to remove the protective bag before first use. The Air purifier adopts double -sided air intakes. Appropriate clearance should be maintained when placed against a wall.

Note: The power inlet is located at the lower left of the product.

1. Connect the power adapter to the side port of the air purifier and connect the socket. When the air purifier beeps and the power button flashes, the air purifier is ready
2. Tap to turn on the purifier.
3. When using the air purifier, allow at least 15 inches / 38 cm of clearance from the front of the air purifier. Keep away from anything that would block air flow, such as curtains.

LCD SCREEN AND CONTROL PANEL

Note: When no pollution is detected for 2 hours of operation in 4F mode, the fan will automatically set to Auto to save energy.

HOW TO OPERATE THE UNIT

1. Tap to change wind speed to 1 F, 2F, 3F, 4F.
2. Under sleep mode, the air purifier will work at the quietest wind speed and minimized light. When the screen is activated again, it will exit sleep mode
3. Automatically adjust the wind speed according to the detected air quality
4. Can cycle between 2h, 5h, Sh.
5. Press and hold for three seconds to lock/unlock the air purifier
6. In the power-on state, the filter timing starts to consume, and the initial time is 2000 hours. Touch to display the filter life percentage on the screen in real time, and the initial value is F99. When FOO is used, the screen displays the filter life from constant on to flashing and the filter key light also flashes
7. When the percentage reaches FOO, flashes, after replacing the filter, press and hold this key for 5 seconds until you hear three beeps, the screen displays F99, the filter life changes from flashing to steady light, stops flashing, Reset completed (Users can replace the filter in advance according to the usage environment and reset the filter in this way)
8. Turn on the device and press the power button for about 5 seconds until you hear a “beep” sound, and the LCD screen displays “RS”. After 3 seconds, the device will restore default settings, and the reset of the Wi-Fi connection will be completed.

HOW TO DOWNLOAD THE APP AND CONNECT THE AIR PURIFIER

Havaworks App Setup

Note: The “Havaworks” App is continually being improved and may change over time. If there are any differences, follow the in-app instructions.

1. To download the “Havaworks” App, scan the QR code or search “Havaworks” in the Apple App Store or Google Play Store . Note: For Android™ users, choose “Allow” to use “Havaworks” .

2. Open the “Havaworks” App. log in or sign up.
   Note : You must create your own “Havaworks” account to use third-party services and products. These will not work with a guest account. With a “Havaworks” account, you can also allow your family and friends to control your smart air purifier.

3. Follow the in-app instructions to set up your smart air purifier.
   Note : Your phone must have Location turned on while your phone is connecting to your smart air purifier. This is required to establish the Bluetooth® connection. You can turn Location off after your smart air purifier is finished connecting to the “Havaworks” App.

Wi-Fi Connection

• To disconnect Wi-Fi, press and hold the power button for about 5seconds, until the device makes a “beep beep beep” sound. This will restore the smart air purifier’s default settings and disconnect it from the “Havaworks” App.
• To reconnect, please follow the instructions in the “Havaworks” App for adding a device.
• Or scan the QR code to add a device

Havaworks App Troubleshooting

My smart air purifier isn’t connecting to the “Havaworks” App.

• Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device.
• During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm that the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
• Test the password by connecting a different electronic device to the router.
• If you’re manually typing in the SSID and password, double-check that both are entered correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned off while setting up your air purifier.
• Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, the air purifier will not be able to access your Wi-Fi network, and setup will fail.

PRECAUTIONS

1. Non-professional maintenance personnel are prohibited from dismantling and refitting the air purifier.

2. Prohibit the use of power beyond the specification.

3. Do not get the air purifier wet.

4. Do not wipe the air purifier with alcohol or organic solvent.

5. Avoid suing the unit around heavy, oily smoke.

6. Do not spray insecticides in or on the unit.

7. Do not run the unit if the power cord is damaged.

8. It is forbidden to use different types of power adapters

9. Tip : Don’t block the PM2.5 sensor

10. Please pay attention to ventilation when using the air purifier and gas appliances at the same time.

11. Close doors and windows to effectively and quickly purify indoor air.

12. Inspect the power plug regularly for any damage.

NOTE If any of the following happens, unplug the power immediately.

• No button are working.
• Short circuit.
• The power cord or plug becomes abnormally hot.
• There is a burning smell or unusual sound and vibration.
• Other abnormal phenomena or malfunctions.

Problem checking

No Power

• Check power cord plug is completely plugged into the unit.
• Ensure the wall outlet has power.

No wind coming from the unit

• Ensure the unit has power and try increasing the fan speed.
• Make sure nothing is blocking the air intake.
• Ensure nothing has fallen into the unit from the top panel to prevent the fan from being stuck

Indoor odor is difficult to be removed

• The effectiveness of the filter may have been run out. Please replace the filter.

If the air purifier still doesn’t work, please unplug the unit and contact our support team.

TROUBLESHOOTING

When abnormal condition happens, please check the following before sending the air purifier to repair.

1. Plug in the air purifier.
2. Check to see if the power cord is damaged. If it is, stop using the air purifier and contact Customer Support.
3. Plug the air purifier into a different outlet.
4. The air purifier may be malfunctioning. Contact Customer Support.

Airflow is significantly reduced or no wind|

1. Make sure the 1ilter is removed from its packaging and properly in place.
2. Tap      to increase the fan speed.
3. Make sure no objects are blocking the front, sides, or top of the air purifier (the inlet or outlet)
4. Leave 15 inches / 38 cm of clearance from the front of the air purifier.
5. The 1ilter may be clogged by large
   particles, such as hair or lint, blocking airflow. Please replace the niter

Air purifier makes an unusual noise while the fan is on|

1. Make sure the 1ilter is properly in place with plastic packaging removed
2. Make sure the air purifier is operating on a hard, flat, level surface.
3. Replace the 1ilter
4. The air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact Customer Support Do not try to repair the air purifier.

Poor air purincation quality or odor is difficult to remove|

1. Tap   to increase the fan speed.
2. Make sure no objects are blocking the front, sides, or top of the air puriner (the inlet or outlet).
3. Make sure the niter is removed from its packaging and properly in place.
4. Close doors and windows while using the air puriner
5. If the roorn is larger than 219 ft 2 / 20 rn2 , air purincation will take longer.
6. Check that whether the nite r adsorbed too many pollutants to capture, if yes.replace the niter.

Strange smell coming from the air purifier|

1. Clean the niter, or replace it.
2. Make sure not to use your air purifier in an area with high humidity or while diffusing essential oils.
3. Contact Customer Support.

Air Quality Indicator light always stays green, even when the air quality is poor|

1. Make sure no objects are blocking the PM2.5 sensor of the air purifier.
2. Leave 15 inches / 38 cm of clearance from the front of the air puriner. Keep away from anything that would block airflow, such as curtains.
3. The PM2.5 sensor detects airborne particles, but it cannot
   detect gas.

Make sure there aren’t gasses polluting the air.

Air Quality Indicator always stays red|

1. Clean the PM2.5 sensor outlet.
2. If you are using an ultras onic humidifier near  the air puriner, the mist may affect the accuracy of the PM2.5 sensor. The PM2.5 sensor will detect the large mist particles, and the Air  Quality Indicator may turn red. Avoid using an ultrasonic humid ifi er near the ai r puri fi er, or avoid using Auto Mode.

Numerically display PM2 .5 index always stays 000|

1. Make sure no objects are blocking the PM2.5 sensor of the air purifier.
2. Contact Customer Support.

is still flashing after replacing the nite r|

1. Reset and check niter indicator.
2. Press and hold for 5 seconds until you hear three beeps, the screen displays F99, will stops flashing and reset completed.

Air puriner randomly turns off| Air puriner is malfunctioning. Stop using the air puriner and contact Customer Support.

After checking the above items, if the air purifier still doesn’t work, please unplug the power and contact the agent for repair.

Note:
If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store in a dry place to avoid moisture damage.

MAINTENANCE

The unit needs regular maintenance to ensure that the air purifier is at optimal performance. Regularly wipe the air inlet and outlet with a soft, damp cloth. Allow unit to dry completely before turning back on.

Instructions of cleaning filter

1. Turn off the unit and unplug the power cord.
2. open the filter cover and remove the filter.
3. use a soft brush or vacuum cleaner to clean the filter.
4. Tip: you can place the filter in direct sunlight for 1-3 hours. Do not allow the filter to get wet.

Note: Above actions only help to maintain filters’ performance.

Reset Filter Indicator:
When the filter needs to be replaced, the filter indicator light will flash to remind you.

1. Turn off the device and unplug the power cord from the left side of the device.
2. Open the purifier cover from the notches on both sides and remove the filter.
3. Install the new filter (remove the protective plastic bag) and reset the cover.
4. Press and hold the filter button for 5 seconds until you hear 3 beeps to complete the reset of the filter indicator

Tip: PM2.5 sensor (don’t block the sensor)

Email: [email protected]

MADE IN CHINA

Documents / Resources

| MORENTO HY4866-WIFI Smart Air Purifier Home Large Rooms [pdf] Instruction Manual
HY4866-WIFI Smart Air Purifier Home Large Rooms, HY4866-WIFI, Smart Air Purifier Home Large Rooms, Purifier Home Large Rooms, Home Large Rooms, Large Rooms, Rooms
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>