Beurer UB 60 Electric Bed Heater Electric Mattress Pad Instructions

: June 16, 2024
: Beurer

Table of Contents

Beurer UB 60 Electric Bed Heater Electric Mattress Pad
Product Information
Product Usage Instructions
Explanation of symbols
Important instructions Retain for future use
Intended use
Operation
Cleaning and maintenance
Storage
Disposal
Technical data
Warranty / service
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Beurer UB 60 Electric Bed Heater Electric Mattress Pad

Beurer-UB-60-Electric-Bed-Heater-Electric-Mattress-Pad-
product

Product Information

Specifications
- Product Name: UB 60 / UB 68 XXL
- Model: UB 60
- Model: UB 68 XXL
Important Instructions
- Read the instructions carefully.
- Do not insert pins into the product.
- Do not bleach the product.
- Do not use folded or rucked products.
- Do not dry the product in a tumble dryer.
- Do not iron the product.
- The product should not be used by very young children (0-3 years).
- Do not dry-clean the product.
- Dispose of packaging in an environmentally friendly manner.
Manufacturer Information
- The products comply with the technical regulations of the EAWU (Eurasian Economic Union).
- The products are double insulated and belong to protection class 2.
- The KEMA-KEUR mark certifies safety and compliance with regulations.

Product Usage Instructions

Items included in the package
- The package includes the following items:
- UB 60 / UB 68 XXL heated underblanket
Important Instructions
- Retain the instructions for future use.
Intended Use
- The heated underblanket is designed to provide warmth and comfort while sleeping.
Operation
- Before using the product, please follow these steps:
- Ensure that the product is properly connected to a functioning power outlet.
- Switch on the product using the power switch (“I” position).
- Select the desired temperature setting.
Cleaning and Maintenance
- To clean and maintain the product, please follow these guidelines:
- Do not bleach or dry-clean the product.
- Do not use a tumble dryer or iron on the product.
Storage
- When not in use, store the product in a clean and dry place.
Disposal
- Dispose of the product and its packaging in an environmentally friendly manner, following local regulations.
Troubleshooting
- If you encounter any problems with the product, refer to the troubleshooting section in the user manual or contact customer service for assistance.
Technical Specifications
- Manufacturer: Beurer
Warranty / Service
- The product comes with a warranty. For warranty details or service inquiries, please contact the manufacturer.
Frequently Asked Questions (FAQ)
- Q: What is the intended use of the heated underblanket?
- A: The heated underblanket is designed to provide warmth and comfort while sleeping.
- Q: Can the product be machine-washed?
- A: No, the product should not be machine-washed. Please follow the cleaning instructions provided in the user manual.
- Q: Can very young children use the product?
- A: No, the product should not be used by very young children (0-3 years).

Dear customer,
Thank you for choosing a product from our range. Our name stands for high- quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty, air and baby. With kind regards Your Beurer team

Explanation of symbols

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:

$Beurer-UB-60-Electric-Bed-Heater-Electric-Mattress-Pad-fig-1 $1$$ $Beurer-UB-60-Electric-Bed- Heater-Electric-Mattress-Pad-fig-1 $2$$

Items included in the package

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present.
Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed.
If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.

Heated underblanket

1 Control
1 Operating instructions

Description

Supply plug
Supply cord
Control
Slider for ON/OFF
Illuminated temperature settings
-Button to increase the temperature
-Button to decrease the temperature
Plug-in coupling

Important instructions Retain for future use

WARNING

Non-observance of the following notes may result in personal injury or material damage (electric shock, skin burns, fire). The following safety and hazard information is not only intended to protect your health and the health of others, it should also protect the product. For this reason, pay attention to these safety notes and include these instructions when handing over the product to others.
This heated under blanket must not be used by persons who are not sensitive to heat or by other vulnerable persons who may not be able to react to overheating (e.g. diabetics, people with skin alterations due to illness or scarred tissue in the application area, after taking pain relief medication or alcohol).
This heated-under blanket must not be used by very young children (0-3 years old) as they are unable to respond to overheating.
This heated under blanket can be used by children older than 3 and younger than 8 years of age provided they are supervised. For this, the control must always be set to the minimum temperature.
This heated-under blanket may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised and have been instructed on how to use the heated underblanket safely, and are fully aware of the consequent risks of use.
Children must not play with the heated underblanket.
Cleaning and user maintenance must not be performed by children unless supervised.
This heated underblanket is not designed for use in hospitals.
This heated under blanket is only intended for domestic/private use, not for commercial use.
Do not insert pins.
Do not use when folded or bunched up.
Do not use if wet.
Before using it on an adjustable bed, check that the heated under blanket and the cables are not, for example, trapped in a hinge or bunched up.
This heated under blanket may only be used in conjunction with the control specified on the label.
This heated under blanket must only be connected to the mains voltage that is specified on the label.
The electrical and magnetic fields emitted by this heated under blanket may interfere with the function of a pacemaker. However, they are still well below the limits: electrical field strength: max. 5000 V/m, magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla. Please therefore consult your doctor and the manufacturer of your pacemaker before using this heated underblanket.
Do not pull, twist or make sharp bends in the cables.
If the cable and control of the heat pad are not positioned properly, there may be a risk of becoming entangled in, being strangled by, tripping over, or stepping on the cable and control. The user must ensure that excess lengths of cable, and cables in general, are safely routed.
Please check this heated underblanket frequently for signs of wear and tear or damage. If any such signs are evident, if the heated underblanket has been used incorrectly or if it no longer heats up, it must be checked by the manufacturer before being switched on again.
Under no circumstances should you open or repair the heated underblanket (including the accessories) yourself because faultless functionality can no longer be guaranteed thereafter. Failure to observe this will invalidate the warranty.
If the mains connection cable of this heated underblanket is damaged, it must be disposed of. If it cannot be removed, the heated underblanket must be disposed of.
When this heated underblanket is switched on:
- Do not place any sharp objects on it
- Do not place any heat sources, such as hot water bottles, heat pads or similar, on it
The electronic components in the control warm up when the heated underblanket is in use. For this reason, the control must never be covered or placed on the heated underblanket when it is in use.
It is essential to observe the information relating to the following chapters: Operation, Cleaning and maintenance, Storage.
If you should have any questions about using our devices, please contact our Customer Services department.

Intended use

CAUTION
This heated under blanket is designed for warming beds, only.

Operation

Safety

CAUTION
- This heated underblanket is equipped with a SAFETY SYSTEM. This sensor technology prevents the entire surface of the heated under blanket from overheating by automatically switching off the heated under blanket in the event of a fault.
- If the safety system has switched off the heated underblanket, the temperature setting is not illuminated any more even when the heated underblanket is switched on.
- Please note that the heated underblanket is not operable any more due to safety reasons in this case and has to be sent to the service address indicated.
- Do not connect the defective heated underblanket with another control of the same type. This would trigger a permanent switch-off via the control safety system.

Initial use

Spread out the heated underblanket flat onto your mattress starting at the foot end.
To operate the heated underblanket connect the control to the heated underblanket by plugging in the connector.
Then plug in the supply plug into the mains outlet.
Then put on your bedsheet in the usual manner so that the heated underblanket is between your mattress and the bedsheet.

CAUTION

Make sure that the heated underblanket is spread out entirely flat and that it will not rumple up or crease when in use.

NOTE: Lie in comfort

If the plug-in connector at shoulder level bothers you, you can rotate the electric underblanket by 180° so that the plug-in connector lies at the foot of the bed (see illustration).
So that the switch is within comfortable reach of your hand, Beurer offers a switch with a longer connection cable (Item no. 108.611). This is available directly from Beurer Customer Services.

Switching on
Set the ON/OFF slider (4) to the ON (I) position to switch on the heated underblanket (see Fig. switch). The temperature settings will then light up.

Selecting the temperature setting
To increase the temperature, press the button (6). To decrease the temperature, press the button (7). After switching on the temperature setting is illuminated.

Setting 0: OFF
Setting 1: minimum heat
Setting 2-3: Individual heat
Setting 4: maximum heat

NOTE:

The quickest way to heat up the heated underblanket is to select the highest temperature setting of the control, first.
We strongly recommend switching on the heated underblanket approx. 30 minutes before going to bed and covering it with the quilt to prevent the warmth from escaping.

WARNING

If the heated underblanket is used continuously (for several hours) it is recommended to use the lowest setting of the control to avoid overheating of the user.

Automatic switch-back

NOTE:

This heated underblanket features an automatic switch-back for safety purposes. Temperature settings 4 and 3 are automatically switched to temperature setting 2 after 3 hours.

Automatic switch-off

This heated underblanket is equipped with an automatic switch-off.
This turns off the heat supply 12 hours after the heated underblanket is first switched on.
This is indicated by a flashing temperature setting. In order to reactivate the heated underblanket, the sliding switch (4) must initially be set to off (“0” position).
After about 5 seconds it is possible to switch it on again.
If the heated underblanket will not be used after timed switch-off, it should be switched off (sliding switch to position “0”) and the mains plug removed from the mains socket.

Switching off

Set the ON/OFF slider (4) to the OFF (0) position to switch off the heated underblanket. After switching off the temperature setting is not illuminated any more.

NOTE:

If the heated underblanket won’t be used for several days, switch it off (Slider to setting „0“/OFF) and remove the supply plug from the mains outlet.

Cleaning and maintenance

WARNING

Always remove the supply plug from the mains outlet and remove the control from the heated underblanket by disconnecting it at the connector. Otherwise there is a risk of an electric shock.

CAUTION

The control must never come into contact with water or other liquids, as this may cause damage.
To clean the control, use a dry, lint-free cloth. Do not use cleaning agents containing solvent or scouring agents.
To remove stains from the heated underblanket use a damp cloth and, if necessary, a mild cleaning agent.

CAUTION

Note that the heated underblanket must not be dry-cleaned, wrung out, machine dried or ironed.
Otherwise the heated underblanket may be damaged.
The heated underblanket is machine washable.
Set the washing machine to a particularly gentle, 30 °C cycle (woolens programme). Use a mild detergent with dosage according to the manufacturer’s instructions.

CAUTION

Note that the heated underblanket will suffer from too frequent washing.
For its entire life, therefore, the heated underblanket should be washed not more than 5 times in a washing machine.
While the heated underblanket is still damp after washing, shape it to its original form and size and place it flat over a clothes drying rack to dry.

WARNING

Do not attach the heated underblanket to washing lines with washing pegs or the like.
Otherwise the heated underblanket may be damaged.
Only reconnect the control to the heated underblanket after the connector and the heated underblanket are completely dry.
Otherwise the heated underblanket may be damaged.

WARNING

Under no circumstances switch on the heated underblanket to dry it.
Otherwise there is a risk of an electric shock.

Storage

When not in use we recommend to store the heated underblanket in its original packaging. For this purpose, disconnect the control from the electric underblanket by unplugging the plug-in coupling.

CAUTION

Allow the heated underblanket to cool down before folding. Otherwise the heated underblanket may be damaged.
Do not crease the heated underblanket by placing items on top of it during storage.

Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point.
Dispose of the devicein accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

What if there are problems?

Problem	Cause	Remedy

The temperature settings are not illuminated while

– the switch is fully connected to the heated under- blanket

– the supply plug is connected to the mains outlet with correct function

– The ON/OFF slider is switched on at the switch side („I“)

| The Safety System switched off the heated underblanket irreversible| Send the heated un- derblanket together with the switch to the service.

Technical data

For technical data, see the rating plate label on the electric underblanket.

Warranty / service

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows.
The warranty conditions below shall not affect the seller’s statutory warranty obligations which ensue from the sales agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 5 years, commencing from the purchase of the new, unused product from the seller.
The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use.
German law shall apply.
During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.
If the buyer wishes to make a warranty claim, they should approach their local retailer in the first instance: see the attached “International Service” list of service addresses.
The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required.
A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with
- a copy of the invoice/purchase receipt, and
- the original product.
The following are explicitly excluded from this warranty:
- deterioration due to normal use or consumption of the product;
- accessories supplied with this product which are worn out or used up through proper use (e.g. batteries, rechargeable batteries, cuffs, seals, electrodes, light sources, attachments and nebuliser accessories);
- products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the instructions for use, as well as products that have been opened, repaired or modified by the buyer or by a service centre not authorised by Beurer;
- damage that arises during transport between manufacturer and customer, or between service centre and customer;
- products purchased as seconds or as used goods;
- consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions). Repairs or an exchange in full do not extend the warranty period under any circumstances.