eufy SECURITY E340 Dual Video Doorbell User Guide
- June 17, 2024
- eufy SECURITY
Table of Contents
eufy SECURITY E340 Dual Video Doorbell User Guide
AT A GLANCE
Front View
- LED Light
- Motion Sensor
- Primary Camera Lens
- Microphone
- Ambient Light Sensor
- LED Ring / Doorbell Button
- LED Light
- Secondary Camera Lens
- Speaker
Rear View
-
Detaching Mechanism
-
Power Terminals for Existing Doorbell Wires (Optional)
-
SYNC Button
Press to turn on the doorbell.
Press and hold for 2 seconds until you hear a beep to set up the doorbell. (Optional)
Press quickly 5 times within 3 seconds to turn off the doorbell.
Battery Compartment -
QR Code (Scan to add the doorbell in the app)
HOW THE SYSTEM WORKS
Works Independently
This video doorbell can work independently once it is connected to your home
wireless router. Additionally, you have a variety of options to receive
notifications and hear a ring when someone presses your video doorbell.
- Use a traditional doorbell chime (if you have one).
- Use a eufy Security doorbell chime (sold separately).
- Use an Amazon Alexa Echo Show device.
Works with eufy Security HomeBase (Optional)
The video doorbell detects motion at your porch and lets you to answer the
door anytime, anywhere. You can store video clips in the built-in storage of
your eufy Security HomeBase 2 or S380 HomeBase (sold separately). When someone
rings the doorbell, people in the house will be notified.
CHARGING THE BATTERY PACK
SETTING UP THE SYSTEM
- Download and install the eufy Security app, then sign in or create an account.
- Follow the in-app instructions to add the video doorbell.
DETERMING THE POWER OPTION
Option 1: Battery Powered
If you don’t have existing doorbell wiring at your front door, use the
included battery. You are free to determine the location of the doorbell, and
the mounting will be easy and quick. When the battery is low, you will need to
recharge it. Battery life varies with use. If you choose this option, please
skip to DOORBELL MOUNTING (Battery Powered).
Option 2: Wire Powered
If you have existing and working doorbell wires at your front door, the video
doorbell will be constantly powered by these wires. So there’s no need to
detach and recharge after installation. The mounting position is limited. If
you choose this option, please skip to DOORBELL MOUNTING (Wire Powered).
DOORBELL MOUNTING (Battery Powered)
Choose a Location
- Take the video doorbell to your front door and check the live view in the app. Choose a location where you can see the desired field of view. Consider the following factors:
- Check if you can reuse the existing holes and anchors in the wall or door frame.
- If you want to place the doorbell near a side wall, make sure the wall isn’t in the field of view. Otherwise, the IR light will be reflected and the night vision will be blurred.
- If you are drilling the mounting holes for the first time, the recommended height is 48″ (1.2m) above the ground.
- To adjust the angle, use the 15º mounting wedge as a supplementary mounting bracket.
Mount the Bracket
Use the provided screws to secure the mounting bracket on the wall.
DOORBELL MOUNTING (Wire Powered)
Check the Doorbell Wires
- Ring the existing doorbell to check if it is working. If it doesn’t ring, your doorbell wires may be defective. Power on the doorbell by the built-in battery or consult an electrician to repair the wires.
- Shut off the power at the circuit breaker. Turn the lights on and off to make sure the electricity in your home is properly shut off.
Always be careful when handling wires. If you’re not comfortable installing it yourself, have a qualified electrician to do it.
Detach the Existing Doorbell Button
If you already have existing doorbell wiring: 1. Remove the existing doorbell
button with a Phillips-head screwdriver (not provided). 2. Pull the two wires
out carefully when removing the existing doorbell. Straighten the wire ends if
necessary.
Choose a Location
- Take the video doorbell to your front door and check the live view in the app. Choose a location where you can see the desired field of view. Consider the following factors:
- Check if you can reuse the existing holes and anchors in the wall or door frame.
- If you want to place the doorbell near a side wall, make sure the wall isn’t in the field of view. Otherwise, the IR light will be reflected and the night vision will be blurred.
- If you are drilling the mounting holes for the first time, the recommended height is 48″ (1.2m) above the ground.
- To adjust the angle, use the 15º mounting wedge as a supplementary mounting bracket.
Mount the Bracket
Use the provided screws to secure the mounting bracket on the wall.
Connect the Wires to the Doorbell
Connect the wires to the terminals on the back of the doorbell, then tighten
the terminal screws. Wire can be connected to any terminal.
To prevent short-circuiting, make sure the wires are not touching each other after connecting them to the terminals. If the wires are too short, use the extension wires and wire nuts to make them longer. Use electrical wiring tape instead if there is no more space on the wall for wire nuts.
Install the Doorbell
Align the doorbell with the bottom of the mounting bracket, then press the top
of the doorbell into place until it clicks.
Restore Power
Switch the main circuit breaker back to ON. You’re all set!
SAFETY
-
The suitable temperature for devices and accessories is -20°C to 50°C (Charging temperature is 0°C to 40°C).
-
Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature.
-
Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments.
-
It is recommended to supply the device in an environment with a temperature that ranges from 5°C to 25°C.
-
When supplying power, place the device in an environment that has a normal room temperature and good ventilation.
⚠ CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.
Warning: -
Replacing a battery with an incorrect type may bypass safeguards and create danger;
-
Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
-
Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
-
A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases.
NOTICE
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirements, use product that maintains a 20cm
distance between the device and the human body. Frequency bands and power as
below:
The following importer is the responsible party (contract for EU matters): Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract for UK matters): Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
CUSTOMER SERVICE
12-month limited warranty
(US) +1 800-988-7973
support@eufy.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
PAP 22
Raccolta Carta
Model：T8214
5100500XXXX V01
References
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>