OLIGHT PL-S Valkyrie Weapon Mountable LED Torch User Manual
- June 17, 2024
- OLIGHT
Table of Contents
OLIGHT PL-S Valkyrie Weapon Mountable LED Torch
Product Information
Specifications
- Model: PL-S Valkyrie
- Light Color: Cool White
- CCT: 6500K
- CRI: 72
- Maximum Output: 550 Lumens
- Beam Distance: 100m
- Impact Resistance: IPX7
- Dimensions: (L)69.2(W)28(H)25.7mm
- Battery Type: CR123A (included)
- Weight: 109g/3.84oz (Including Batteries)
- Battery Capacity: 1600mAh 3V (4.8Wh)
Frequently Asked Questions
- Q: What should I do if the product malfunctions or does not operate as expected?
- A: In case of any issues, please contact our customer support within the warranty period for repair or replacement. Refer to the warranty section in the manual for more details.
- Q: How can I activate the strobe function of the light?
- A: To activate the strobe function, quickly double press any button downward. Press any button again to turn off the strobe.
- Q: What is the recommended battery type for this product?
- A: The recommended battery type for the PL-S Valkyrie is a CR123A battery, which is included with the product.
Max. 550 Lumens WML with Single CR123A Battery.
How To Operate
For product specification, see Table 1;
Operating instructions as below:
- Unscrew the head of the rail mount light, see Figure 1-1;
- Remove the insulating film, see Figure 1-2;
- Remove the insulating film in the battery compartment, and then tighten the head of the rail mount light (clockwise, until it cannot be unscrewed by hand).
Screw off, see Figure 2;
Adjust the installation position of the rail mount light and tighten the screw, see Figure 3;
Turn the light on/off, see Figure 4;
- Quickly single press (press and then quickly release) any key, the output will stay lit. press the button again and the output turns off.
Momentary on, see Figure 5;
- Press any button and hold, output turns on when pressed and off when released.
Strobe, see Figure 6;
- Quickly double press the button downward to turn on the strobe. After the strobe is on, press any button to turn it off.
Turn on/off the strobe function, see Figure 7;
In the off state, quickly press any button at least 5 times, press and hold (for more than 1 second) on the last press, then turn on or off the Strobe function, and release the button to turn off the power. (Strobe indicates Strobe function is on, constant light indicates Strobe function is off).
Battery installation, see Figure 8;
WARNING
- Keep away from babies and young children.
- Do not store, charge or use the light in a car or similar places where the temperature may exceed 60°C.
- Do not look directly at the light source or shine to eyes, because it may cause temporary blindness or permanent damage to the eyes.
- Do not block the light at close range, as the energy emitted from the light may cause the object to burn.
- CAUTION HOT: Do not touch the hot surface, as it may cause skin burns.
- Keep the removed battery properly. Don’t store the battery together with metallic objects such as coins, or screws.
- Don’t use damaged, deformed batteries, or those with broken envelopes.
NOTICE
- Do not disassemble the product.
- Do not put a hot light into any type of fabric bag or fusible plastic container.
- Do not activate the maximum brightness mode multiple times continuously to prevent the high temperature on the surface.
- Active thermal protection: The built-in sensor monitors the temperature in real time. After operating for a fixed period of time in high brightness, it prevents overheating by reducing the output.
- Do not immerse the light in seawater or other corrosive media as it will damage the product.
- For products with magnet-sensitive switches, the brightness and mode may be inconsistent when approaching a strongly magnetic object. This is a normal phenomenon.
- When the battery is at low voltage, the maximum output will be capped at a relatively low brightness.
- The P365 rail mount only fits on P365 rails. The GL adapter is installed as a factory default and suitable for Glock rails. If used with other rails such as MIL-STD-1913 or Hellcat, it needs to be replaced by the user.
- NYLOK is a registered trademark of NYLOK LLC.
- GLOCK is a registered trademark of GLOCK LLC.
- If the battery needs to be stored for a long time, it should be removed from the product and stored in a place with a low temperature and humidity.
- Please use a high-quality CR123A battery, otherwise the product may not access High mode.
- RCR123A battery with a protective plate can be used.
EXCLUSION CLAUSE
- Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.
WARRANTY
- Within 30 days of purchase: Contact the original seller for repair or replacement.
- Within 5 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.
Contact
- USA Customer Support
- Global Customer Support
Visit www.olightworld.com to see our complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd.
- 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
Made in China
