renkforce 2390409 USB-C to USB-A Adapter with USB-C Port for Charging Instruction Manual

renkforce 2390409 USB-C to USB-A Adapter with USB-C Port for Charging

Instruction Manual

USB-CTM to USB-A adapter with
USB-CTM port for charging
Item no. 2390409

1. Intended use

This product is designed to extend a USB-A DisplayLink docking station to enable use with a laptop or mobile device with a USB-C™ connection.

The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.

Using the product for purposes other than those described above may damage the product. Improper use can cause a short circuit, fire or other hazards.

This product complies with statutory, national and European regulations. For safety and approval purposes, you must not rebuild and/or modify the product.

Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.

All company and product names contained herein are trademarks of their respective owners. All rights reserved.

2. Delivery content

• Product
• Operating instructions

3. Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

4. Symbols in this document

This symbol warns of hazards that can lead to personal injury. Read the information carefully.

5. Safety information

Read the operating instructions carefully and especially observe the safety information.

If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

5.1 General information

• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
• Should you have any questions or concerns after reading this document, please contact our technical support or a professional technician.
• Maintenance, modifications and repairs must be carried out by a technician or a specialist repair centre.

5.2 Handling
Please handle the product carefully. Impact, shocks or a fall even from a low height can damage the product.

5.3 Operating conditions

• Do not place the product under any mechanical stress.
• Protect the product from extreme temperatures, strong jolts, flammable gases, vapours, and solvents.
• Protect the product from high humidity and moisture.
• The product must not be exposed to direct sunlight.

5.4 Operation

• Consult an expert when in doubt about the operation, safety or connection of the device.

• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  – is visibly damaged,
  – is no longer working properly, – has been stored for extended periods in poor ambient conditions or
  – has been subjected to any serious transport-related stress.

• Ensure that cables are not pinched, kinked or damaged by sharp edges.

• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.

5.5 Connected devices
Always observe the safety information and operating instructions of any other devices which are connected to the product.

6. Operating elements

7. Operation

7.1 Connecting the docking station
1. Connect the USB-CTM connector (3) to an available USB-CTM port on your laptop or mobile device.

Note:
– Mobile devices may only be supported to a limited extent. See section „10 Technische Daten“ for information on supported mobile devices. Additional drivers or apps may need to be installed in order to use the docking station.

2. Connect the USB-A plug of the docking station to the USB-A port (1) on the product.
The docking station is now ready for use.

Note:
– Many operating systems already have the necessary drivers pre-installed.
– Required drivers can be obtained directly from the chipset manufacturer (DisplayLink).

7.2 Charging your laptop or mobile device
1. Connect the USB-CTM connector (3) to an available USB-CTM port on your laptop or mobile device.
2. Connect a suitable USB-C™ charger to the USB-CTM port (2).
Your laptop/mobile device will start to charge.

Note:
– The product supports the USB-PD 2.0 standard for charging devices.

8. Cleaning and care

Important:
– Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions, as these may damage the housing or impair the functioning of the device.

1. Disconnect the product from the connected devices before cleaning.
2. Use a dry, lint-free cloth to clean the product. Do not allow water to get inside the housing. To prevent scratch marks, do not press too strongly on the surface when cleaning.

9. Disposal

All electrical and electronic equipment placed on the European market must be labelled with this symbol. This symbol indicates that this device should be disposed of separately from unsorted municipal waste at the end of its service life.

All owners of waste equipment are obliged to dispose of waste equipment separately from unsorted municipal waste. Before handing the old device to a collection point, end users are required to separate old batteries which are not enclosed by the old device, as well as lamps which can be removed from the old device without any damage.

Distributors of electrical and electronic equipment are legally required to accept waste equipment free of charge. Conrad offers the following free return options (further information is available on our website):

• At our Conrad stores
• At the collection points established by Conrad
• At the collection points of public waste disposal agencies or at the collection systems set up by manufacturers and distributors in accordance with the German Electrical and Electronic Equipment Act.

The end user is responsible for deleting personal data on the old device before disposal.

Please note that in countries outside Germany, other obligations may apply to the return and recycling of old devices.

10. Technical specifications

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.

Copyright 2022 by Conrad Electronic SE.

Read More About This Manual & Download PDF:

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>