SARGENT 8200 Lever Mortise Locksets Installation Guide
- March 18, 2024
- SARGENT
Table of Contents
SARGENT 8200 Lever Mortise Locksets Installation Guide
STANDARD 8200 MORTISE LOCKSET SHOWN
Please Note: Refer to the following instruction sheets for complete lock installation.
- LN or L Trim – A7035
- LE or LW Trim – A7031
- LS Trim – A7029
- WT Trim – A7034
PARTS LIST DESCRIPTION
A.) Inside Trim Pack consisting of:
-
Lever set screws (2) [1 long, 1 short]
-
Lever Adapter
-
Machine screws #8-32 x 5/8” (2)
-
Adapter and plate assembly (2)
-
Washers (2)
-
Cap Nut
-
Spindles (2)
NOTE: Items 2, 4, 5 and 6 are pre-assembled when shipped.
B.) Outside Trim Pack consisting of: -
Cap Nut
-
Washers (2)
-
Adapter and plate assembly
-
Mounting Posts (2)
-
Spindle Springs (2)
C.) Complete trim pack consisting of: Both inside trim pack (A) and outside trim pack (B) together
Inside Lever Requirements/Specifications:
Outside Lever Requirements/Specifications:
IMPORTANT NOTE: UNLESS OTHERWISE SPECIFIED ALL TOLERANCE TO BE + OR – .005 LEVER WEIGHT AND CONFIGURATION (center of gravity – cg) MUST NOT APPLY A MAXIMUM LEVER TORQUE THAT EXCEEDS 1.4 in-lbs.
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved.
Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>