hidealite 75 098 20 24V LED Strip Installation Guide

hidealite 75 098 20 24V LED Strip

Product Specifications:

• Product Name: LEDstrip 24V IP20 Lowlum
• Model Numbers:
  • 75 098 20*
  • 75 098 21
  • 75 098 22*
  • 75 098 23
  • 75 098 24*
  • 75 098 25
• Quantity: 70 pieces
• Power: 4.4W per piece
• Version: 2023/07

Product Usage Instructions

Installation:

1. Ensure the power source is switched off before installation.
2. Peel off the adhesive backing from the LEDstrip.
3. Place the LEDstrip in the desired location and press firmly to secure it in place.
4. Connect the LEDstrip to a compatible power source following the manufacturer’s guidelines.

Operation:

To turn on the LEDstrip, simply switch on the power source. Use a compatible dimmer if available to adjust brightness levels.

Maintenance:

Regularly check the LEDstrip for any signs of damage or malfunction. Clean with a soft, dry cloth if needed. Avoid using harsh chemicals or abrasive materials.

Frequently Asked Questions

Q: Can I cut the LEDstrip to fit a specific length?

A: Yes, the LEDstrip can be cut at designated cutting points to fit your desired length. Be sure to follow the cutting guidelines provided in the user manual.

Q: Is the LEDstrip suitable for outdoor use?

A: The LEDstrip mentioned is IP20 rated, which means it is suitable for indoor use only. For outdoor applications, consider using IP65 or higher rated LEDstrips.

CONTENTS

DIMENSION

Find vour Profile Suitable profiles at www.hidealite.com

SPECIFICATION

E-nr| Snro| El.nr| GTIN| Length| Max. Length| LED color| LED/m| Output max/m| Voltage DC
---|---|---|---|---|---|---|---|---|---
75 098 20| 41 585 11| 32 276 71| 7392971149448| 5m| 10m| 2700K| 70pcs| 4,4W| 24V
75 098 21| 41 585 12| 32 276 72| 7392971149455| rm| 10m| 2700K| 70pcs| 4,4W| 24V
75 098 22| 41 585 13| 32 276 73| 7392971149462| 5m| 10m| 3000K| 70pcs| 4,4W| 24V
75 098 23| 41 585 14| 32 276 74| 7392971149479| im| 10m| 3000K| 70pcs| 4,4W| 24V
75 098 24*| 41 585 15| 32 276 75| 7392971149486| 5m| 10m| 4000K| 70pcs| 4,4W| 24V
75 098 25| 41 585 16| 32 276 76| 7392971149493| rm| 10m| 4000K| 70pcs| 4,4W| 24V

Accessories

SAFETY INSTRUCTIONS

Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance

Installation & Safety Instructions

• The installation should be performed by a qualified electrician.
• See the table of technical specifications and follow the instructions to perform the installation in a safe and correct manner, note the recommendations for maximum lengths.
• Make sure that the LEDstrip’s voltage corresponds with that of the drive unit and ensure that the polarity is correct.
• When two or more LE Dstrips are intercon- nected, make sure the maximum recommended length is not exceeded
• Make sure the power is switched off during in-stallation and that the LEDstrips do not overlap to avoid overheating.
• It is important that the LED luminaire’s maximum specified ambient temperature is taken into consideration in order to guarantee its life span, if this is exceeded, the life span can be shortened drastically.
• Use the recommended/approved assembly fittings to ensure the lifespan of the LEDstrip.
• The LEDstrip must not be switched on when rolled up.
• LEDs are sensitive components and must be treated with care and not subjected to mechanical stress.
• The flexible LEDstrip must not be bent more than the recommended bending radius.
• The LED chip should not be exposed to direct sunlight when switched on.
• The double-sided adhesive tape is for installing the lights, but may need to be complemented with heat-resistant silicone. When installed in the profiles (not uplight) recommends heat-resistant silicone for a permanent and sustainable installation. Do not apply silicone directly on the LED chip but along the sides.

We reserve the right to change specifications at any time.

Installation

Recvcle

Accessories – Screw connection 8mm IP20 5pcs

Accessories – Screw joint 8mm IP20 5pcs

Accessories – Quick Joint 8mm IP20

Accessories – Quick connection 8mm IP20

Elektro Elco AB, Tallvägen 5, SE-56435 Bankeryd, Sweden | infe.uk | www.hidealite.fi | www.hidealite.no / www.hidealite.dk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>