VIMAR 02973.B Smart Home View Wireless Instruction Manual
- June 17, 2024
- VIMAR
Table of Contents
SMART HOME VIEW WIRELESS
30810.x – 02973
02973.B Smart Home View Wireless
Download the View Wireless App from the stores onto the tablet/smartphone you will be using for configuration
THREE OPERATING MODES (ALTERNATIVE)
Stand alone| |
---|---|---
Depending on the mode you select, you will need
Stand alone| |
---|---|---
Nothing else| Gateway| Hub Smart Home
for management via smartphone/tablet art. 30807.x-20597-19597-16497-14597| Hub
Smart Home
Amazon Alexa, Google Assistant, Siri and Homekit voice assistants for possible
voice operation| Hub Samsung SmartThings Amazon Echo Plus, Eco Show, Echo
Studio
FRONT VIEW
N.B. Graphic representation of the Linea series. Position of terminals, wiring and functions also identical for 02973.
| Degrees Celsius/Fahrenheit selection, Configuration and Reset
---|---
| Display brightness and RGB LED in standby setting
A| Display
B| Set point adjustment dial
C| Illuminated ring for status signalling
| Power on and off
| Heating or air conditioning mode selection
The Apple, iPhone and iPad logos are trademarks of Apple Inc., registered in the United States and in other Countries and Regions. App Store is a service trademark of Apple Inc. Google is a trademark of Google LLC. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates
CONNECTIONS: CIRCULATION PUMPS, BURNERS, SOLENOID VALVES AND TEMPERATURE PROBE
FEATURES
Rated supply voltage | 100-240 V~, 50/60 Hz |
---|---|
RF transmission power | < 100mW (20dBm) |
Frequency range | 2400-2483.5 MHz |
Setpoint between 4°C and 40°C
ErP classification (EU Reg. 811/2013): – ON/OFF: class I, contribution 1%. –
PID: class IV, contribution 2%.
Type of action| 1BU
Degree of pollution| 2
Rated pulse voltage| 4000 V
Software class| A
2 (L, N) for line and neutral
2 for external temperature probe (art. 02965.1 and 20432-19432-14432)
Maximum length of the external sensor connection cable| 10 m
Minimum cross sectional area of twisted cable to use for inputs| 0.5 mm2
2 C-NO relay
The View Wireless App can also be used to associate a magnetic or wired contact of art. 03980 to turn off the temperature control system in the event of an open window; in this case, the time for reaction and reactivation of contact opening and closing can be set:
- Reaction time: between 0 minutes (instantaneous) and 30 minutes; default = 0 minutes
- Reactivation time (time after which the thermostat is reactivated even without closing the window): between 0 (disabled) and 12 hours; default = 1 hour.
USE
The front buttons, the display, the dial and the lighting of the circular ring
around the display can be used to set and display all the operating modes of
the thermostat.
Use the dial to set a new setpoint. In particular, for operation in Bluetooth
technology:
– in automatic operating mode, turn the dial for the thermostat to switch to
manual operation for a period of time which can be set on the View App;
– in manual operation or reduction mode, the thermostat remains in this mode
and the setpoint is that set on the dial.
INSTALLATION RULES
The C-NO contact of the relay must be protected against overloads by
installing a device, fuse or automatic 1-way switch, with a rated current not
exceeding 10 A. • Do not connect a SELV circuit to the C-NO terminals as there
is no double insulation on the L-N terminals. • The device must be installed
in a flush mounting box or surface mounting box with the related mounting
frames and cover plates, at a height of 1.5 m above floor level, in a suitable
position for the correct detection of the room temperature, avoiding
installation in recesses, behind doors and curtains, areas affected by heat
sources or subject to the flow of forced heating/cooling ventilation sources
or affected by atmospheric factors. Avoid in particular installation on
perimeter walls or in association with devices which generate heat (e.g.
dimmers or lamps).
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead
DEVICE DETAILS, CONFIGURATION AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE PRODUCT DATA SHEET ON www.vimar.com (the QR code opens the data sheet of art. 30810.B, which shares the same instructions sheet as art. 30810.x-02973).
https://www.vimar.com/en/int/catalog/product/index/code/30810.B
****49401702A0 04 2309
www.vimar.com
Viale Vicenza, 14
36063 Marostica VI – Italy
References
- Amazon.com
- Home automation, electrical equipment, smart home - Vimar energia positiva
- Home automation, electrical equipment, smart home - Vimar energia positiva
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>