EVENT LIGHTING KONTROL36 6 x RGBWAU Fixture DMX Controller User Manual

EVENT LIGHTING KONTROL36 6 x RGBWAU Fixture DMX Controller

Product Specifications

• Product Name: KONTROL36
• Type: 6 x RGBWAU fixture DMX controller
• Control Mode: RGBWAU
• Number of Fixtures Controlled: Up to six, expandable by doubling up on addresses
• Control Functions: Manual RGBW, Colour Fade, Auto, Chases, Preset Mode, Colour Macro Mode, Follow Mode

Product Usage Instructions

Safety Instructions

• For safety, please read this user manual carefully before initial use.

Control Surface

• The KONTROL36 has six fixture buttons allowing independent control of your fixtures.
• Select a fixture to control and adjust the channels using the dimming sliders.
• Multiple fixtures can be selected simultaneously.

Manual RGBW

• To manually control colors, press the Manual RGBWAU button, select the fixture, and adjust colors using the sliders.

Color Fade

• Select this mode to fade the colors of all selected fixtures.
• Adjust Speed, Fade time, Master Dimmer, Sound, and sound level settings.

Auto Mode

• Activate built-in automatic random color programs.
• Adjust settings like Speed, Fade time, Master Dimmer, Sound, and sound level.

Chases

• Select from built-in chase programs and change modes using presets.
• Adjust Speed, Fade time, Master Dimmer, Sound, and sound level settings.

Preset Mode

• Select preset color presets to control colors.
• Set Master dimmer, fade time, and speed before selecting a color.

Colour Macro Mode

• Choose preset color macros by selecting colors from the Speed slider.
• Adjust the Master dimmer and fade time settings.

Follow Mode

• Activate color following chaser mode by selecting the Colour Fade and Auto buttons.
• Adjust Speed, Fade time, Master Dimmer, Sound, and sound level settings.

Frequently Asked Questions (FAQ)

Q: Can the KONTROL36 control more than six fixtures?

• A: Yes, fixtures can be doubled up on addresses to allow control of more than six fixtures.

Q: How do I reset the KONTROL36 to its default settings?

• A: To reset the KONTROL36 to default settings, power off the unit and then power it back on while holding down the ‘Reset’ button for 5 seconds.
• For safety, please read this user manual carefully before initial use.
• Event Lighting reserves the right to revise the manual at any time. Information and specifications within this manual are subject to change without notice.
• Event Lighting assumes no liability or responsibility for any errors or omissions.
• Please consult Event Lighting for any clarification or information regarding this item.

Safety Instructions

WARNING

• Do not open this device, there are no user-serviceable parts inside. Risk of electric shock.
• Do not operate this device outdoors or in any location where dust, excessive heat, water, or humidity may affect it.
• Do not connect this device to a dimmer or rheostat.
• The maximum ambient temperature is 104° F (40° C). Do not operate this device at higher temperatures.

Product Description

• The KONTROL36 is a compact DMX controller designed for independent control of up to six fixtures with an RGBWAU control mode.
• Fixtures can be doubled up on addresses to allow control of more than six fixtures.

Control Surface

Fixtures

• The KONTROL36 has six fixture buttons allowing independent control of your fixtures.
• By selecting a fixture the corresponding LED will light up and the dimming sliders will then control the fixture’s six channels.
• Multiple fixtures can be selected at one time.

Manual RGBW

• The KONTROL36 has a manual control function, selecting this mode by pressing the Manual RGBWAU button then, select the fixture you want to control, and then you can manually adjust the colors by the 6 sliders.

Color Fade

• The KONTROL36 has a built-in Colour fader program, selecting this mode will fade the colors of all selected fixtures. Speed, Fade time, Master Dimmer, Sound, and sound level can be set before or after selecting this mode.

Auto

• The KONTROL36 has built-in automatic random color programs. Selecting this mode will start the program of selected fixtures. Speed, Fade time, Master Dimmer, Sound, and sound level can be set before or after selecting this mode.

Chases

• The KONTROL36 has built-in chase programs. Selecting this mode will start the program on selected fixtures and the mode can be changed by selecting presets which are based on the following table.
• Speed, Fade time, Master Dimmer, Sound, and sound level can be set prior to or after selecting this mode.

Orange| Yellow| Magenta| Cyan| Purple| F White| Bamber| Peach| Sunflower
---|---|---|---|---|---|---|---|---
Red / Green| Green   / Blue| Red / Blue| Red / Cyan| Green / Magenta| Yellow / Blue| White  / Blackout| Color Cycle| Yellow/ Magenta
Salmon| Lime| Warm White| Sea Foam| Light Blue| Green UV| Blue UV| Red UV| White UV
---|---|---|---|---|---|---|---|---
Red/ Green| Green / Blue| Red/ Blue| Red  / Cyan| Green    / Magenta| Yellow / Blue| White     / Blackout| Color Cycle| Yellow   / Magenta

Preset Mode

• The KONTROL36 has preset color presets, selecting this mode allows you to select the colors from the 18 buttons.
• First, select the fixture you want to control and then select the color from the preset buttons. Master dimmer, fade time and speed can be set before selecting the color.

Colour Macro Mode

• The KONTROL36 has preset color macros, selecting this mode allows you to select the colors from the Speed slider.
• First, select the fixture you want to control and then select the color from the Speed slider.
• Master dimmer and fade time can be set before and after selecting the color.

Follow Mode

• The KONTROL36 has color following chaser mode, selecting the Colour fade and the Auto button will active this mode.
• Speed, Fade time, Master Dimmer, Sound, and sound level can be set before or after selecting this mode.

Sound

• The KONTROL36 has a built-in microphone which can be used in Auto and Chasers modes, the sensitivity can be adjusted by the sound knob.

Strobe

• The KONTROL36 has a built-in strobe function.
• The rate of the strobe can be adjusted by the Strobe slider

DMX Addresses

• Fixtures should be set to the following addresses to be controlled by the Kontrol36
• Fixture 1 = Address 1
• Fixture 2 = Address 7
• Fixture 3 = Address 13
• Fixture 4 = Address 19
• Fixture 5 = Address 25
• Fixture 6 = Address 31

TECHNICAL SPECIFICATIONS

• DMX512 protocol with 36channels
• Independent control of 6 fixtures, 6ch each (RGBWAU)
• Each fixture can be set in different playback modes simultaneously
• Sound-activated: synchronized music activation through an internal microphone with adjustable sensitivity
• Preset: 18 colors preset for an immediate operation
• Macro: Virtual color wheel to scroll the whole color spectrum
• Variable fade times for all playback modes
• Variable strobe 0-30Hz
• Slider for master dimmer
• Adjustable blackout allows fixtures to fade out
• Power: 9V DC 500mA
• MIDI Signal: 5 din pin standard interface
• Dimensions: 393 x 140 x 50 mm
• Weight: 1.5kg

WARRANTY

Please contact your local Kookaburra Account Manager.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>