LIGHTOLIER C4SA LED 4 Gen 3 Round Airsseal IC Frame Instruction Manual

LIGHTOLIER C4SA LED 4 Gen 3 Round Airsseal IC Frame

INSTRUCTION MANUAL

Downlighting
Calculite LED 4″ gen 3
C4SA Square AirSeal IC frame

Calculite LED 4″ generation 3 provides excellent performance coupled with optimized installation flexibility via UniFrame. Industry leading visual comfort and uniform illumination make it an ideal choice for open office, institution, healthcare, and retail applications.

Complete luminaire = Frame + Engine + Trim + Accessories (optional)

Project:__
Location:
Cat.No:__
Type:__
Qty:____
Notes:__

Beam options

Accessories

SBA: Interact Ready System Bridge Accessory with integral occupancy and daylight sensor (compatible with all 0-10V options, see SBA spec sheet) 6
CA4SFT: Mud-in ring for use with flangeless installations (ordered with a flangeless trim)

1. Universal 120-347V for 0-10v (Z10) dimming only. Non-Z10 dimming options available for 120/277V only.
2. Consult factory for 5000K CCT (50) with narrow (N) beam.
3. Dim-to-warm (D2W) available only with Z10 dimming. Narrow (N) and medium (M) beams only.
4. See Beam options table to the left for light engine and trim combination spacing criterion.
5. Medium (M) beam is ideal for Lensed Wall Wash (LW) applications.
6. Requires IRT9015 IR remote & Interact Pro App for commissioning.

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

Frame-in-kits

AirSeal:
Galvanized steel housing for dry or plaster ceilings. Pre-installed telescoping mounting bars from 13″ to 24″.

Patented install Mounting frame:
With no driver attached, this versatile frame
is independent of driver accommodating a wide range of lumen packages, driver types and CCTs, including 120V and 277V inputs.
Close-cut aperture design eliminates possibility of gap between ceiling opening & reflector flange.
Separate wiring compartment for wiring frame to building allows inspection prior to light engine install.
Simple plug-and-play connection between frame and light engine from below ceiling eliminates need for wiring between frame and LED driver, and also saves time during installation and future replacements/upgrades. Plug-and-play receptacle accommodates technology upgrade of light engines and replacements for the life of the building.

Dimming

All configurations are FCC Class A unless otherwise specified.

• Advance 0-10V 1% (Z10), logarithmic curve is standard, specify D2O for factory-set dim-to-off function, consult factory for linear dimming curve.
• EldoLED SOLODrive (SOL) 0-10V 0.1%
• Lutron PEQ0 (L01) Hi-Lume Premier EcoSystem 0.1%
• Lutron LDE1 (L1) EcoSystem 1%
• Lutron LTE (LTE) Hi-Lume 2-wire phase cut 1%
• Electronic low voltage (E) – forward or reverse phase dimming, remodel and AirSeal IC Shallow are FCC Class B
• DALI (D) – DT6 DALI 0.1%
• DMX (DMX) – Digital multiplexing with RDM 0.1%
• Dim to Warm (D2W): option changes CCT from 3000-1800K gradually as it dims. Use with Z10 dimming only. Fixture-to-fixture consistency of ≤3SDCM at 2700K & 3000K, and ≤5SDCM at 1800K.

Dimming options:

The following are factory-set for the SOL, D, and DMX driver options (ex. DMXLIN):

• SOL/D/DMX: Logarithmic (-) standard
• SOL/D/DMX: Linear (LIN)
• SOL/DMX: Square (SQR)

Optical systems

Comfort throughout the space:
Patented optical system combines primary and secondary optics to provide a true 50° physical cutoff and 45° reflected cutoff virtually eliminating the view of the light source and bright spots in the reflector. A new reflector curve reduces reflector brightness by up to 50% compared to existing products, allowing for the use of higher lumen packages in smaller apertures without creating bright spots in the ceiling.

MesoOptics PET optical diffusion film:
provides a smooth beam shape and mitigates color over angle with optimized luminaire efficiency.

Quality of light:
2 SDCM ensures color consistency from fixture to fixture and over the luminaire’s long lifetime. Proprietary optical grade silicone lens with patterned surface provides soft, even beam diffusion without hotspots or dark rings.

Light Engine

Quick connect power pack comprised of light source and driver allow for easy installation and replacement from below ceiling with no need for additional wiring. This allows for:

– Frame and ceiling installation to be performed while still finalizing details such as lumen packages, CCT and control type.
– Easy replacement of electronics at end of life with minimal wasted material and labor required.
– Ease and upgradability of technology.
– 347V light engines are 0-10v dimming only and include dedicated 347V driver for use with universal 120/277/347V (U) frames. All other dimming options available only for 120/277V input.

Options and Accessories

Flangeless mud-in ring: Use CA4SFT For use with flangless plaster installations.
SBA: Interact Ready System Bridge Accessory. Requires IRT9015 IR remote and Interact Pro App for commissioning. Specify with integral occupancy and daylight sensing capabilities for controls and compatibility with Interact Pro.

ENERGY STAR® exceptions

– 500 lm, 90 CRI & Lensed Wall Wash configs
– Dali, ELV & EldoLED Solo drivers

Title 24 exceptions

– 1000 lm in Downlight & Lensed Wall Wash configurations

Labels and Listings

– cULus listed for wet locations
– ENERGY STAR® certified
– RoHS certified
– CEC Title 24 JA8 certified

Warranty

5 year limited warranty
Visit Signify.com/warranties
for more information on Signify’s standard 5- year limited warranty on complete luminaire systems.

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

Polished Reflectors Shown as round reflectors but represent the finish of Calculite square reflectors.

Specular clear (CL): Most specular and most efficient finish, delivers maximum photometric performance but can produce a mirror image effect of the interior space.

Comfort clear (CC): Semi-specular finish that softens the light at the source of the reflector and creates a subtle, even luminance from the reflector cone.

Comfort clear diffuse (CD): Slightly diffuse clear finish, that eliminates iridescence and reduces the mirror image effect inherent with specular finishes.

White (WH): (matte) Brightest illuminated aperture and provides the smoothest transition to most ceilings when off (white is only available with a white flange).

Flanges

White (–): (matte) Provides the smoothest transition to ceilings when off.

Polished (P): (matches aperture) Produces a continuous look throughout the reflector (aperture matching).

Flangeless (F): (flush-mount)Creates a flush, virtually seamless transition from aperture to ceiling.

Mud-in ring (FT): Low profile, machined aluminum mud-in ring provides a raised rib to plaster up to and a 3⁄16″ flange thickness. The ring is attached to the ceiling material as opposed to the frame-in kit to avoid conduction of heat and vibration which can cause yellowing or cracking of the plaster.

C4SA Calculite LED 4″ gen

Square AirSeal IC frame

AirSeal (A)

Flangeless mud-in ring (CA4SFT) accessory

Electrical – Narrow

Electrical – Medium & Wide

Lifetime (TM-21) data

Dim-to-Warm: CCT vs Dimmed level

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

AccuRender Technology (CRI 90+)

The right light brings colors to life. Our new AccuRender technology helps ensure colors are rendered more accurately and consistently, while doing so as efficiently as CRI 80 products.

Enjoy design flexibility

Full range of products and options:

• Available soon in across Lightolier portfolio for application flexibility
• Multiple color temperatures (CCTs) and lumen packages offered

Promote savings

High efficacy, with no penalty:

• Energy efficacy compares well to conventional 80 CRI
• Up to 25% more energy savings vs competitor 90 CRI 1
• Helps meet Title 24 requirements

Show your true colors

High color rendering:

• True to life colors that help energize your environment and render better flesh tones critical for healthcare hospitality and retail applications.

• Ra up to 94 CRI
  R9 up to 67 CRI
  Ga up to 99 CRI
  C9 up to 94 CRI

• Rf up to 92 TM-30
  Rf,h1 up to 91 TM-30
  R9 up to 100 TM-30
  Rcs,h1 up to -5% TM-30

Achieve color balance

Best in class color consistency:

• Promote aesthetic harmony in your space with ≤ 2 SDCM

Round Downlight

Photometric – Downlights with CRI of 90+ & R9 of 50+

Round Wall Wash

Photometric – Downlights with CRI of 90+ & R9 of 50+

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

Currently supported maximum system size

To be able to design the lighting system correctly for the customer, it is important to know the prime characteristics of the system, its possibilities and limitations.

System level

Total number of gateways| Unlimited
Total number of devices| 200 per network
•  Luminaires with integrated sensors| 150
•  Smart TLEDS| 150
•  Zones + groups| 64
Total number of ZGP devices (sensors and switches)| 50
•  Sensors| 30
•  Switches| 50
Group level
Recommended number of lights| 40 (maximum 150)
Number of ZGP devices| 5
Number of scenes| 16

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

Wireless controls options Interact

• SWZCS is a connected sensor with integral occupancy and daylight sensing and supports wireless mesh connectivity.

• The sensor works in the standalone mode
  (similar to SpaceWise) when configured without a gateway or in a cloud connected mode if a compatible gateway is used.

• Interact includes an App, a portal and a broad portfolio of wireless luminaires, lamps and retrofit kits all working on the same system.

• Startup is implemented via Interact Pro App
  (Android or iPhone) & BlueTooth connectivity. The App provides flexibility to choose between a gateway or non gateway mode for setup.

• Setup with the gateway requires wired internet access to the gateway. It is possible to add a gateway at a later point.

• Prepare project configuration steps remotely and use IRT9015 remote on-site to identify and group devices together.

Compatible with:
– SWS200 & UID8465 wireless scene switch
– Battery powered IP42 presence sensor OCC sensor IA CM WH 10/1
– Battery powered IP42 presence & daylight sensor OCC-DL sensor IA CM IP42 WH
– LCN3110: battery powered IP65 presence sensor, OCC sensor IA CM IP65W
– LCN3120: battery powered IP65 presence & daylight sensor, OCC-DL sensor IA CM IP65 WH

• For more information on Interact visit: interact-lighting.com/interactproscalablesystem

Radio only sensor (RA or RADIO)

• Integral RA or RADIO only sensor simply enables wireless mesh connectivity to the luminaire without any occupancy or daylight sensing.
• Ideal for applications where sensing functionality is managed by other Interact devices and the luminaire only needs to have wireless connectivity.
• Interact includes an App, a portal and a broad portfolio of wireless luminaires, lamps and retrofit kits all working on the same system.
• Startup is implemented via Interact Pro App (Android or iPhone) & Bluetooth connectivity. The App provides flexibility to choose between a gateway or non-gateway mode for setup.
• Setup with the gateway requires wired internet access to the gateway. It is possible to add a gateway at a later point.
• Prepare project configuration steps remotely, identify and group devices together onsite.
• Compatible with SWS200 and UID8465 wireless scene switch, wireless Occ sensor (OCC SENSOR IA CM IP42 WH 10/1) and wireless Day/Occ sensor (OCC MULTI SENSOR IA CM WH 10/1).
• For more information on Interact visit: interact-lighting.com/interactproscalablesystem

Sensor bundle (IAOSB or SB)

• A wireless IoT connected lighting solution for large enterprises that span across multiple floors, buildings and require multiple gateways.
• View all your projects under one dashboard and easily compare insights from multiple projects in one view.
• Compatible with SWS200 wireless scene switch, wireless Occ sensor (OCC SENSORIA CM IP42 WH 10/1) and wireless Day/Occ sensor (OCC MULTI SENSOR IA CM WH 10/1) and wireless Occupancy or Daylight & Occupancy sensors available.• Use Interact software and insights to increase building efficiency, achieve building wide integration and optimize space through occupancy analytics.
• IAOSB or SB option in addition to occupancy and daylights sensing supports advanced IoT capabilities, such as people estimation analysis, desk level temperature & humidity sensing, noise classification, and BLE beacon.
• Requires compatible Gateway and internet connectivity for commissioning.
• For more information, visit: interact-lighting.com/interactproscalablesystem

Emergency Options (ER100)

• Power Sensing (factory default) – Recommended UL924 option requires unswitched power sense line, absence of voltage on the normal circuit triggers luminaire to 100% output.
• Power Interruption Detection (field option) – Detects AC power interruption >30ms triggers 90 minute emergency mode with luminaire at 100% output.

Wired controls options Interact (PoE):

• PoE based IoT connected lighting solution for large enterprises that span across multiple floors, buildings and require multiple gateways.
• Use Interact software and insights to increase building efficiency, achieve building wide integration and optimize space through occupancy analytics.
• Test switch and indicator light mounted on side of chassis on one end.
• Supports advanced IoT Apps on Personal Control, Space Management, wayfinding, room/desk reservation and offers open APIs for light control and data exchange.
• Integral sensor option for occupancy sensing (PIR) and/or daylight harvesting available for additional energy savings.
• Optional integral emergency controller and battery pack provides 600lm nominal output.
• PoE lighting controller is accessible from below.
• Emergency battery has a 3 month pre-installed shelf life, and must be stored and installed in environments of 20C to 30C (-4F to 86F) ambient, and 45-85% relative humidity.
• For more information on Interact Office Wired, visit: interact-lighting.com/office or
  www.usa.lighting.philips.com/systems/system- areas/offices.

Interact supported sensor option codes across Genlyte product lines

| | Day-Brite| Ledalite| Lightolier
---|---|---|---|---
ZigBee + Bluetooth + Sensing| | SWZCS| CS| SBA accessory (external)
ZigBee + Bluetooth| | RADIO| RA| RA
ZigBee + Bluetooth + Sensing + Environmental data| | IAOSB| SB| SB
ZigBee + Highbay + Sensing| | SWZCSH| –| –

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

Narrow beam, 1500lm Engine, 101 lm/W at 14W

Medium beam, 1500lm Engine, 94 lm/W at 14W

1. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products.
2. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products.

C4SA Calculite LED 4″ gen 3

Square AirSeal IC frame

Wide beam, 1500lm Engine, 72 lm/W at 14W

Lighting Data – Example

C4RWWCL / C4L15935W illumination on the wall 5′ down from the ceiling is 40 f.c. beneath and 43 f.c. between fixtures.

Adjustment factors

Lensed Wall Wash, 1500lm Engine, 86 lm/W at 14W

1. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products.
2. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products.

Specifications:

• Product Name: Calculite LED 4 gen 3
• Frame Type: C4SA Square AirSeal IC frame
• Application: Open office, institution, healthcare, and retail
• Lumens: 500 lm to 2000 lm
• CRI/CCT Options: 90CRI/2700K to 90CRI/5000K
• Dimming Options: 0-10V, Dim to Off, DALI, Linear, 0-10V 0.1%, and more
• Beam Options: Narrow, Medium, Wide
• Finish Options: Specular clear, Comfort clear, Comfort clear diffuse, White (matte)
• Accessories: Interact Ready System Bridge Accessory, Mud-in ring

FAQ:

Q: Can I use a 5000K CCT with a narrow beam?

A: Consult the factory for compatibility with a 5000K CCT and narrow beam option.

Q: What is Dim-to-warm (D2W) and its compatibility?

A: Dim-to-warm is available only with Z10 dimming and supports narrow and medium beams.

Signify

© 2023 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.
CalCalccuulliitteeLLEEDDggeenn3344iin_n_AAiirrsseealalCC44SSAA 0044//2233 papaggee 9 9 o off 99

Signify North America Corporation 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807 Telephone: 800-555-0050

Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008

All trademarks are owned by Signify Holding or their respective owners.
www.lightolier.com

References

• cat.no
• Interact IoT lighting | Interact

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>