NATIONAL INSTRUMENTS USB-6353 Multifunction I O Device User Guide
- June 17, 2024
- NATIONAL INSTRUMENTS
Table of Contents
USB-6353 Multifunction I O Device
User Guide
Bridging the gap between the
manufacturer and your legacy test system.
USB-6353 Multifunction I O Device
COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily
accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every NI series. We
work out the best solution to suit your individual needs.
Sell For Cash Get Credit , Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.
Request a Quote USB-6353
DAQ GETTING STARTED GUIDE
Externally Powered USB
This document provides basic installation instructions for National
Instruments externally powered USB DAQ devices. Refer to the documentation
specific to your DAQ device for more information.
Unpacking the Kit
Caution To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis.
-
Touch the antistatic package to a metal part of the computer chassis.
-
Remove the device from the package and inspect the device for loose components or any other sign of damage.
Caution Never touch the exposed pins of connectors.
Note Do not install a device if it appears damaged in any way. -
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Installing the Software
Back up any applications before upgrading your software. You must be an Administrator to install NI software on your computer. Refer to the NI-DAQmx Readme on the software media for supported application software and versions.
- If applicable, install an application development environment (ADE), such as LabVIEW, Microsoft Visual Studio .
- Install the NI-DAQmx driver software. ® , or Lab Windows ™ /CVI ™.
Connecting the Device
Complete the following steps to set up an externally powered USB DAQ device.
-
Connect the power supply to an electrical outlet and your device.
Note Verify that the voltage on the external power supply matches the voltage in your area (for example, 120 V AC or 230 V AC) and the voltage required by your device. -
Connect the cable from the computer USB port or from any other hub to the USB port on the device.
-
Power on the device.
After the computer detects your device (this can take 30 to 45 seconds), the LED on the device blinks or lights.
Windows recognizes any newly installed devices the first time the computer reboots after hardware is installed. On some Windows systems, the Found New Hardware wizard opens with a dialog box for every NI device installed. Install the software automatically is selected by default. Click Next or Yes to install the software for the device.
Note If your device is not recognized and the LED does not blink or light, make sure that you installed NI-DAQmx as outlined in the Installing the Software section.
Note After Windows detects newly installed NI USB devices, NI Device Monitor launches. -
If applicable, install accessories and/or terminal blocks as described in the installation guides.
-
Attach sensors and signal lines to the device, terminal block, or accessory terminals. Refer to the documentation for your DAQ device or accessory for terminal/pinout information.
Configuring the Device in NI MAX
Use NI MAX, installed automatically with NI-DAQmx, to configure your National Instruments hardware.
-
Launch NI MAX.
-
In the Configuration pane, double-click Devices and Interfaces to see the list of installed devices. The module is nested under the chassis.
If you do not see your device listed, pressto refresh the list of installed devices. If the device is still not listed, disconnect and reconnect the USB cable to the device and computer. -
Right ‑click the device and select Self-Test to perform a basic verification of hardware resources.
-
(Optional) Right ‑click the device and select Configure to add accessory information and configure the device.
-
Right-click the device and select Test Panels to test device functionality.
Click Start to test the device functions, and then Stop and Close to exit the test panel. If the test panel displays an error message, refer to ni.com/support. -
If your device supports Self-Calibration, right-click the device and select Self-Calibrate.
A window reports the status of the calibration. Click Finish. For more information about Self-Calibration, refer to the device user manual.
Note Remove all sensors and accessories from your device before Self Calibrating.
Programming
Complete the following steps to configure a measurement using the DAQ Assistant from NI MAX.
- In NI MAX, right-click Data Neighborhood and select Create New to open the DAQ Assistant.
- Select NI-DAQmx Task and click Next.
- Select Acquire Signals or Generate Signals.
- Select the I/O type, such as analog input, and the measurement type, such as voltage.
- Select the physical channel(s) to use and click Next.
- Name the task and click Finish.
- Configure individual channel settings. Each physical channel you assign to a task receives a virtual channel name. Click Details for physical channel information. Configure the timing and triggering for your task.
- Click Run.
Troubleshooting
For software installation problems, go to
ni.com/support/daqmx.
For hardware troubleshooting, go to ni.com/support
and enter your device name, or go to ni.com/kb.
Find device terminal/pinout locations in MAX by right-clicking the device name
in the Configuration pane and selecting Device Pinouts.
To return your National Instruments hardware for repair or device calibration,
go to ni.com/info and enter rdsenn, which starts the
Return Merchandise Authorization (RMA) process.
Where to Go Next
Additional resources are online at
ni.com/gettingstarted and in the NI-DAQmx
Help. To access NI-DAQmx Help, launch NI MAX and go to Help»Help Topics»NI-
DAQmx»NI-DAQmx Help.
Examples
NI-DAQmx includes example programs to help you get started developing an
application.
Modify example code and save it in an application, or use examples to develop
a new application or add example code to an existing application.
To locate LabVIEW, LabWindows/CVI, Measurement Studio, Visual Basic, and ANSI
C examples, go to ni.com/info and enter the Info Code
daqmxexp. For additional examples, refer to
ni.com/examples.
Related Documentation
To find the documentation for your DAQ device or accessory—including safety,
environmental, and regulatory information documents—go to
ni.com/manuals and enter the model number.
Worldwide Support and Services
The National Instruments website is your complete resource for technical
support. At ni.com/support, you have access to
everything from troubleshooting and application development self-help
resources to email and phone assistance from NI Application Engineers.
Visit ni.com/services for NI Factory Installation
Services, repairs, extended warranty, and other services.
Visit ni.com/register to register your National
Instruments product. Product registration facilitates technical support and
ensures that you receive important information updates from NI.
National Instruments corporate headquarters is located at 11500 North Mopac
Expressway, Austin, Texas, 78759-3504. National Instruments also has offices
located around the world. For telephone support in the United States, create
your service request at ni.com/support or dial 1 866
ASK MYNI (275 6964). For telephone support outside the United States, visit
the Worldwide Offices section of ni.com/niglobal to
access the branch office websites, which provide up- to-date contact
information, support phone numbers, email addresses, and current events.
Refer to the NI Trademarks and Logo Guidelines at
ni.com/trademarks for information on NI
trademarks. Other product and company names mentioned herein are trademarks or
trade names of their respective companies. For patents covering NI
products/technology, refer to the appropriate location: Help “Patents in your
software, the patents.txt file on your media, or the
National Instruments Patent Notice at ni.com/patents.
You can find information about end-user license agreements (EULAs) and third-
party legal notices in the readme file for your NI product. Refer to the
Export Compliance Information at ni.com/legal/export-
compliance for the NI global trade
compliance policy and how to obtain relevant HTS codes, ECCNs, and other
import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE
ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY
ERRORS. U.S. Government Customers: The data contained in this manual was
developed at private expense and is subject to the applicable limited rights
and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014,
and DFAR 252.227-7015.
0 1-800-915-6216
www.apexwaves.com
**sales@apexwaves.com
All trademarks, brands, and brand names are
the property of their respective owners.
© 2014—2016 National Instruments.
All rights reserved.
374407B-01 Aug16**
Documents / Resources
|
NATIONAL INSTRUMENTS USB-6353 Multifunction I O
Device
[pdf] User Guide
USB-6353, USB-6353 Multifunction I O Device, Multifunction I O Device, I O
Device, Device
---|---