MARTHA STEWART 45645 Upholstered Accent Dining Chair Set Installation Guide
- June 17, 2024
- Martha Stewart
Table of Contents
MARTHA STEWART 45645 Upholstered Accent Dining Chair Set Installation Guide
ASSEMBLY INSTRUCTIONS
Description: FIONA DINING CHAIR
Important safety instructions: • Please read carefully all instructions before assembly. For your safety and ease, assembly by two or more adults is recommended. • Keep instructions for future use. Pre-assembly: • Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware. • Take out all parts and hardware from box.
Parts List
Item | Description | QTY |
---|---|---|
P1 | Chair Back | |
P2 | Seat Frame | |
p3 | Front Legs | |
H1 | Bolts 1/4″ x 1-1/2″ | |
H2 | Bolts 1/4″ x 2-3/8″ | |
H3 | Bolts 1/4 x 3″ | |
H4 | Lock Washers 1/4″ | |
H5 | Flat Washers 1/4″ | |
H6 | Allen Key |
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT
LIABLE FOR ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER
PURCHASE.
Assembly Procedures:
*Assemble the Chair on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Step 1: Attach the Seat Frame (P2) to the Chair Back (P1) as shown below.
(H1)x2 Bolts 1/4″ x 1-1/2″
(H3)x4 Bolts 1/4″ x 3″
( H4)x6 Lock Washers 1/4″
(H5)x6 Flat Washers 1/4″
(H6)x1 Allen Key
Step 2: Attach the Front Legs (P3) to the Seat Frame (P2) as shown below.
(H2)x4 Bolts 1/4″ x 2-3/8″
( H4)x4 Lock Washers 1/4″
(H5)x4 Flat Washers 1/4″
(H6)x1 Allen Key
Step 3: Turn the assembled chair to an upright position. Assembly is
complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO
PREVENT DAMAGE OR INJURY, AND ENSURE STABILITY.
Thank you for your purchase