Martha Stewart 20 Inch Depth Perry St. White Woodgrain-Gold Metal Instruction Manual

: June 9, 2024
: Martha Stewart

Table of Contents

Martha Stewart 20 Inch Depth Perry St. White Woodgrain-Gold Metal
Product Information: Everyday System 8FT Hanging & 6 Bin Cabinet
Product Usage Instructions
The Everyday System™ 8FT HANGING & 6 BIN CABINET (20’’ Deep)
Order of Installation
Rules and Warnings
UPRIGHT
Included Parts
IN THE BOX
BRACKET
Included Parts
SHELF
Included Parts
CABINET W/MESH DRAWERS
CLOSET ROD
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Martha Stewart 20 Inch Depth Perry St. White Woodgrain-Gold Metal

Product Information: Everyday System 8FT Hanging & 6 Bin Cabinet

The Everyday System 8FT Hanging & 6 Bin Cabinet is a highly versatile and customizable storage solution for your home. The system includes 5 vertical uprights measuring 87.25 x 20 inches, 14 basic shelf woodgrains measuring 24 x 20 inches, 2 three-bin cabinets measuring 24 x 20 inches each, and 18 shelf brackets measuring 20 inches each. The system can be further customized with additional cabinet units, a media cabinet, a desk unit, and a closet rod.

Product Usage Instructions

Prepare your space: Before starting the installation process, make sure to prepare your space properly. Tear out any unwanted structures, repair any holes or damaged areas by patching and painting, verify your measurements and confirm that the installation will fit. Make note of anything that could be in the walls such as gas lines, electric wires, or water lines at upright locations.
Install Uprights: Mount the uprights to the wall using the wall brackets and painter’s tape. Make sure to find the high spot in the floor to ensure that the uprights are mounted at the correct height. Keep in mind any obstructions around the space such as wall lights, hanging lights, outlets, switches, etc.
Install Shelf Brackets: Attach the shelf brackets to the uprights according to your desired spacing and placement.
Install Shelves: Begin by installing the standard shelves, followed by the long shelf and shoe shelf if desired. The shelves should rest securely on the shelf brackets.
Install Cabinet Units: The three-bin cabinets and other cabinet units can be easily installed by attaching them to the uprights using shelf brackets. Make sure to position them at a comfortable height and securely attach them to the uprights and shelf brackets.
Install Closet Rod: The closet rod can be easily mounted to the uprights using the closet rod mounts.

For additional guidance on installation or disassembly, please refer to the instructions manual or visit the website provided in the manual.
Congratulations on your purchase of the The Everyday System. Installing your system is straightforward if you follow our instructions in the order provided. Remember – measure twice, drill once!

The Everyday System™ 8FT HANGING & 6 BIN CABINET (20’’ Deep)

Front View

Top View

A Height of system
B Distance between uprights
C Cabinet height
D Shelf and shelf bracket height
E Width of system
F Depth of system

Order of Installation

Please follow the instructions in this order for optimum results and stability of your Everyday System.

Prepare your space
Uprights
Shelf Brackets
Standard Shelf
Long Shelf
Shoe Shelf
Drawer Cabinet
Bin Cabinet
Mesh Door Cabinet
Media Cabinet
Desk Unit
Closet Rod

Rules and Warnings

THIS IS NOT A FREE-STANDING UNIT. FOR SAFETY, ALWAYS ANCHOR TO THE WALL.

Do not attempt to assemble without FIRST securing Upright to the wall.
Failure to anchor this product to a wall and/or otherwise not follow assembly instructions shall void this warranty.
NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
After assembly, make sure all leveler feet are touching the ground.
Your system should be assembled per the template design. For stability of the system, each section must have at least 2, or combination of, the following with a minimum 40” spacing apart: Shelf, Shoe Shelf, Cabinet Unit.
Ceiling height must be at least 90” high to allow clearance for installation.
Trim must be less than 1-1/8” thick to allow for unit clearance.
Maximum height that a cabinet can be mounted is 44” from the top of the cabinet to the floor.
Do NOT re-use parts to attach wall bracket including screws and wall anchors.

If you intend to disassemble and reassemble this unit, please scan the QR code to visit the website for further instruction. To watch videos detailing the installation process, please scan the QR code with your mobile device, or visit: shop.californiaclosets.com/pages/installation-everyday

Components Included

UPRIGHT

THIS IS NOT A FREE-STANDING UNIT. FOR SAFETY, ALWAYS ANCHOR TO THE WALL.
Do not attempt to assemble without FIRST securing Upright to the wall.
NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.

Included Parts

Note: Box may include more than one upright and hardware set.

IN THE BOX

To watch videos detailing the installation process, please scan the QR code with your mobile device, or visit: shop.californiaclosets.com/pages /installation-everyday

Before you start your build do not forget to prepare your space!

Step 1: Tear out any unwanted structures (Example: previous wire closet)
Step 2: Repair any holes or damaged areas by patching and painting.
Step 3: Verify your measurements and confirm the installation will fit. Examples:
Step 3a: If between two walls, measure baseboard to baseboard.
Step 3b: Be aware of obstructions around the space such as wall lights, hanging lights, outlets, switches, etc.
Step 4: Make note of anything that could be in the walls such as gas lines, electric wires, or water lines at Upright locations.

Find the high spot in the floor.

Option 1: Use a long level and move along perimeter of the floor noting where the highest point is. This is the high spot in the floor. (1a)
Option 2:
- Step 1 – Draw a light line on the wall that can be erased later.
- Step 2 – Find the shortest distance be-tween the floor and the line. This is the high spot in the floor. Measure 87-1/4” from the high point (1b) and make a light mark (1c). This is your System Height.

For steps 2-5, use your Layout Design to locate your Upright positions on your wall.
Helpful Hints:

Always make sure the top of the template aligns with your System Height.
Always make sure the template is level before marking hole locations.
Use painters tape to hold the Wall Template in place while you mark hole location.

The Wall Template will assist you in properly spacing distances between uprights. To mark the first two upright locations, align the top of the template with the System Height line drawn in Step 1 (2a) and the middle of the first partition (2b) Make sure that the template is level. It is recommended to use tape to keep the template in position (2c).

Depending on your Layout Design you will be using either the 16”, 24”, 30” or 48” holes for this span. Mark the two holes for each appropriate Upright location.
Reuse the Wall Template for the spacing for the next Upright. Using the previous marked holes as a starting point “START”, space out the next location depending on your Layout Design (16, 24, 30 or 48” span). Remember to check that the template is level and aligns with the System Height. Mark the next upright holes.
Repeat until all Upright hole locations are marked.
WARNING : This wall bracket mount installation is specific to drywall with studs. If your wall is of different construction, you must find appropriate means to attach the wall bracket. It is not required to have the upright brackets be tied into a stud as drywall is acceptable.
If hole location is located on a stud, install wall mount bracket using method “A”. If the hole location is not located on a stud, install wall mount bracket using method “B”.
Method A: Wall Mount Bracket into a stud. Use two screws and attach wall mount bracket to wall.
Method B: Wall Mount Bracket no stud (Drywall). Using a #2 Philips bit, Install EasyAnchor into the 1/8” hole until flush. The Anchor will self drill. Use two screws and attach wall mount bracket to wall.
Ensure leveler is installed all the way into Uprights.
Place Upright on bracket (8a), and partially install screws to secure (8b). Do not tighten.
Adjust leveler leg to level Upright. Then make sure the back leveler also touches the ground. Ensure Uprights are level to adjacent Uprights.
Once system is level, tighten all top screws. Double check that all levelers are touching the ground.

BRACKET

THIS IS NOT A FREE-STANDING UNIT. FOR SAFETY, ALWAYS ANCHOR TO THE WALL.
Do not attempt to assemble without FIRST securing Upright to the wall.
NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.

Included Parts

Tools Required

To watch videos detailing the installation process, please scan the QR code with your mobile device, or visit: shop.californiaclosets.com/pages /installation-everyday

SHELF

THIS IS NOT A FREE-STANDING UNIT. FOR SAFETY, ALWAYS ANCHOR TO THE WALL.
Do not attempt to assemble without FIRST securing Upright to the wall.
NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.

Included Parts

Tools Required

To watch videos detailing the installation process, please scan the QR code with your mobile device, or visit: shop.californiaclosets.com/pages /installation-everyday

CABINET W/MESH DRAWERS

THIS IS NOT A FREE-STANDING UNIT. FOR SAFETY, ALWAYS ANCHOR TO THE WALL.
Do not attempt to assemble without FIRST securing Upright to the wall.
NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.

Included Parts

Tools Required

To watch videos detailing the installation process, please scan the QR code with your mobile device, or visit: shop.californiaclosets.com/pages /installation-everyday

CLOSET ROD

THIS IS NOT A FREE-STANDING UNIT.FOR SAFETY, ALWAYS ANCHOR TO THE WALL.
Do not attempt to assemble without FIRST securing Upright to the wall.
NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.

Included Parts To watch videos detailing the installation process, please scan the QR code with your mobile device, or visit: shop.californiaclosets.com/pages/installation- everyday