LOVMOR VS24-E Vanity Sink Base Cabinet Instruction Manual

June 17, 2024
LOVMOR

LOVMOR VS24-E Vanity Sink Base Cabinet

LOVMOR VS24-E Vanity Sink Base Cabinet

PART

PART DESCRIPTION
A1 Box side panel – left
A2 Box side panel – right
B Box bottom panel
C Box back panel
D Face frame
E Toe kick panel
J Door panel

Parts

CAUTION

  • Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
  • The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
  • Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
  • Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws. Please refer to the actual product for the screw hole position.

HARDWARE CONTENTS

  • CC Soft – close hinge x 4
    Be careful the length of the screws.

Included :
1/2” Flat Head Phillips Screw x 8

3/4” Round Head Phillips Screw x 4

  • DD Wood corner block x 4

Included :
1” Flat Head Phillips Screw x 8

  • EE Corner brace x 13

Included :
1/2” Round Head Phillips Screw x 52

  • GG 1” Flat head Phillips screw x 3

  • HH Rubber bumper x 4

TOOLS REQUIRED (NOT INCLUDED)

Tools

INSTALLATION OVERVIEW

Use 1/2” round head phillips screw x 10

Installation Overview

Use 1/2” round head phillips screw x 10

Installation Overview

Use 1/2” round head phillips screw x 2

Installation Overview

Use 1/2” round head phillips screw x 2

Installation Overview
Installation Overview

Use 1/2” round head phillips screw x 8

Installation Overview

Use 1/2” round head phillips screw x 20

Installation Overview
Installation Overview

Use 1/2” flat head phillips screw x 4

Installation Overview

Use 3/4” round head phillips screw x 4

Installation Overview

If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.

Installation Overview

Some products may have hinges pre-installed.

Use 1” flat head phillips screw x 8 (2 screws for 1 corner block)

Installation Overview
Installation Overview

Dear Customers,

Thank you for purchasing our product. If you require assistance, please contact the customer service team at the retailer where you purchased the product. The customer service team will be happy to assist you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals