LOVMOR V3621DL-E 36 Inch Bathroom Vanity Sink Base Cabinet with 2 Doors Instruction Manual
- June 17, 2024
- LOVMOR
Table of Contents
LOVMOR V3621DL-E 36 Inch Bathroom Vanity Sink Base Cabinet with 2 Doors
FEATURES
Product Specifications
- Model: V3621DL-E
- Drawers: 2 (G1, G2)
- Doors: 1 (J)
- Hardware Included: Glide and runner profiles, screws, adjustable drawer clips, soft-close hinges, wood corner blocks, corner braces, rubber bumpers
Product Usage Instructions
Pre-Assembly:
Ensure all parts are present and undamaged. Keep hardware away from
children. Two adults are recommended for assembly.
Assembly Steps
Step 1: Drawer Assembly
- Attach drawer face panels (F1, F2) to drawer side panels (G1, G2) using the provided screws.
- Attach drawer bottom panel (H) to the assembled drawer sides.
- Secure drawer back panel (I) to complete the drawer assembly.
Step 2: Box Assembly
- Connect box side panels (A1, A2) to box bottom panel (B) using the appropriate screws.
- Attach the box back panel (C) to the assembled box structure.
- Install face frame (D) to the front of the box assembly.
Step 3: Door Installation
- Mount the door panel (J) to the designated position on the box assembly.
Finalization and Adjustment:
Adjust drawer position and alignment using the green spur gears as
indicated in the installation overview section of the manual.
CAUTION
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
- Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
- Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws. Please refer to the actual product for the screw hole position.
`HARDWARE CONTENTS
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION OVERVIEW
Dear customers,
Thank you for purchasing our product. If you require assistance, please
contact the customer service team at the retailer where you purchased the
product. The customer service team will be happy to assist you.
FAQ
Q: Can I assemble the product alone?
A: While possible, it is recommended to have two adults for efficient and
safe assembly due to the size and weight of the product.
Q: What should I do if I have extra screws left after assembly?
A: Do not discard extra screws. Refer to the actual product for any missed
screw hole positions and secure them as needed.