STRICH Noise Gate Pedal Killer Effect Owner’s Manual
- June 17, 2024
- STRICH
Table of Contents
STRICH Noise Gate Pedal Killer Effect
Product Information
Specifications
- Input Impedance: Min. 100k Ohm; Max. 350k Ohm
- Output Impedance: 300 Ohm
- Recommended Load Impedance: 10 kohm
- Equivalent Input Noise: -90 dBu or less
- Power Supply: 9V AC adapter
- Current Draw: 10mA
- Dimension: 115mm(length) x 73mm(width) x 48mm(thickness)
- Weight: 270g
Frequently Asked Questions
- Q: What should I do if the noise gate effect makes the sound level extremely low?
- A: If the noise gate effect reduces the sound level significantly, adjust the threshold knob to find a balance between noise reduction and maintaining the desired sound level.
- Q: Can I use a different power supply than a 9V AC adapter?
- A: It is recommended to use a 9V AC adapter to power the unit as using a different power supply may result in malfunction or damage.
- Q: How do I prevent damage to speakers and devices?
- A: To prevent damage, ensure you follow the correct powering up and down sequence by turning off the power to your guitar amp first before powering down the effect pedal.
Congratulations on your ownership othis eftect pedal. Before using the pedal, please carefuly read the manual, which offers important information concerning how to properly operate the unit.
HOW TO USE
- Connect the input jack with the guitar lightly, the effect pedal will start working automatically.
- THRESHOLD: adjust the valve of the noise-reduction effect, which increases with the clockwise rotation; the higher of the valve, the greater degree of the noise signal filter. Please set the value to actual needs, when the valve is too large, ti would impact the delay effect.
Precautions
Precautions When Connecting
- To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
- Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this pedal. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
- Raise the amp volume only after turning on the power to all connected devices.
- Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
- When powering up: Turn on the power to your guitar amp last.
- When powering down: Turn off the power to your guitar amp first.
Specifications
- Input Impedance: Min. 100k Ohm; Max. 350k Ohm
- Output Impedance: 300 Ohm
- Recommended Load Impedance: 10 kohm
- Equival Input Noise: -90 dBu or less
- Power Supply: 9V AC adapter
- Current Draw: 10mA
- Dimension: 115mm(length)x73mm(width)x48mm(thickness)
- Weight: 270g
- Accessory: Owner’s Manual
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>